FAQs

---

< Back to FAQs

How do I configure my new AL-DTM III using DL-Windows? How do I configure my new lock to communicate with the AL-DTM III, and have the AL-DTM III send the program to my new lock?

1  Configure the AL-DTM III for Door Select Mode:

• Power the AL-DTM III and press the green button until "PC Comm Mode" appears.
• Press and hold both the green and far left button simultaneously.
• When the display reads "Entering Config/Test Mode", release the buttons.
• Press the green button twice:  "Config Door Select Mode" appears.
• Press and hold the green button until you hear a single beep.
• Set Door Select to ON.
• Press the green button to exit Door Select Mode.
• Press the green button 7 more times until "Exit to Standby" appears.
• To exit, press and hold the green button until you hear a single beep.

2  Programming the AL-DTM III with DL-Windows:

• Connect the AL-DTM III to the computer.
• Open the DTM screen to display all of your locks supported by the AL-DTM III.
• Use the DTM Function column to select the correct action.
• Use the Selected column to select one or more locks to be programmed. 
• Left click the Program DTM for Selected Locks button.
• When complete, the bottom of the DTM window will display "Transmission Successful".

3  Set Up a New Lock to be Programmed by the AL-DTM III:

• Place the lock into Program Mode by pressing the Master Code then [AL].
• Program your unique Master Code:  [AL] [1] [AL] New Master [AL] New Master [STAR]
• Program your DTM Download Code:  [AL] [2] [AL] [2] [9] [9] [AL] Code [STAR]

4  Programming a New Lock with the AL-DTM III:

• Set the AL-DTM III to Door Select Mode.
• The AL-DTM III will display:  Operation Mode?  (Choose SELECT).
• The AL-DTM III will display:  Lock Mode?  (Choose NO).
• The AL-DTM III will display:  Door Select Mode?  (Choose YES).
• Connect the AL-DTM III to the lock.
• Confirm/Select the door number on the AL-DTM III display.
• Select GO on the AL-DTM III display. 
• At the lock keypad, press the DTM Download Code.
• When complete, the AL-DTM III will display "Comm. Complete".