Results Per Page | Showing
1-40 of 94 Results
| 1 |
2
|
3
Answer:
For all non-Networx cylindrical locks:
...
View Answer
Answer:
Enable PC uploading / downloading using Function 58, "Upload/Download PC Data", as follows:
...
View Answer
Answer:
An Ambush Code is a special code entered at the lock keypad when a user is forced to unlock a locking device. The device unlocks but sends a silent alarm (with no indication at the keypad). The Ambush Code can be used to trip a relay, to alert...
View Answer
Answer:
Lock models (P)DL4100 and (P)DL4500 include a programmable "Privacy Mode" feature typically used with rooms needing temporary privacy from others (e.g., bathrooms, dorms, and meeting rooms). After using an access code to enter the protected room, the...
View Answer
Answer:
Currently, the Door Number can be programmed using the keypad with only two Trilogy lock models: The DL4100 and PDL4100. If the AL-DTM Data Transfer Module is not available, program (or reset) the Door Number as follows:
...
View Answer
Answer:
When changing the batteries in your Trilogy lock, ensure the correct polarity with each battery. If a battery is installed with incorrect polarity, the lock might seem to power up correctly but in fact will not receive the correct...
View Answer
Answer:
Passage Mode allows passage through the door without requiring a credential. In other words, the door is "unlocked", and allows free passage. As the DL1200 does not store the current date or time, Passage Mode must be manually enabled or...
View Answer
Answer:
There are two basic methods to restore the DL2700 and DL2800 locks back to their original "out of box" factory default settings. Note: All lock programming can also be erased without the need to disconnect the batteries by using Function 99. See the...
View Answer
Answer:
To restore the "out of box" factory default settings:
...
View Answer
Answer:
Keedex, Inc. of Anaheim, California, manufactures high quality gateboxes for Alarm Lock cylindrical and mortise locks that can be welded to gates. The Keedex part number for cylindrical locks is K-BXSIM, available from Grainger Industrial Supply...
View Answer
Answer:
For Alarm Lock models DL2700-IC (Schlage full format IC core) equipped with a slotted washer/spacer, please note the following helpful tip when installing the cylinder tailpiece:
...
View Answer
Answer:
The DL4500DBR internal plastic ring is part # HW1122D. Note: The part number is the same whether it is colored blue or white.
View Answer
Answer:
Yes! Both the Alarm Lock model DL/PDL4100 (cylindrical) and the DL/PDL4500 (mortise-based) feature "Privacy Mode", a feature that is often used where key-free, temporary sessions of privacy are required, such as single-occupancy restrooms,...
View Answer
Answer:
With double-sided door locks like the model DL5200, the secondary side (i.e. "inside/protected side") lock cylinder will NEVER allow the lock to unlock. This secondary side lock cylinder has one function only: To facilitate the installation and/or...
View Answer
Answer:
Functions 72 and 73 allow you to set a day and time that will trigger the lock to enter or exit Passage Mode, respectively. For the schedule to operate automatically, the programmed day/time must transpire while the lock is in "Normal Mode".
...
View Answer
Answer:
Before proceeding, refresh your memory with the following description of the Double-Sided PDL6300:
...
View Answer
Answer:
Andy Phelps, Alarm Lock's National Training Manager, shows you how to add or change a users PIN number in an Alarm Lock T2 (DL2700) lock.
View Answer
Answer:
Andy Phelps, Alarm Lock's National Training Manager, shows you how to place an Alarm Lock Trilogy T2 lock into and out of Passage Mode.
View Answer
Answer:
Andy Phelps, Alarm Lock's National Training Manager, shows you how to add a manager code to the Alarm Lock Trilogy T2 (DL2700) lock.
View Answer
Answer:
Andy Phelps, Alarm Lock's National Training Manager, shows you how to change the Master Code in a Trilogy T2 (DL2700) Lock.
View Answer
Answer:
Andy Phelps, Alarm Lock's National Training Manager, shows you how to change the Master Code in a Trilogy T3 lock.
View Answer
Answer:
Andy Phelps, Alarm Lock's National Training manager, shows you how to program passage mode at the Trilogy T3 lock.
View Answer
Answer:
Andy Phelps, Alarm Lock's National Training manager, shows you how to add a user PIN code to the Alarm Lock Trilogy T3 lock.
View Answer
Answer:
Andy Phelps, Alarm Lock's National Training manager, shows you how to add a user proximity card at the keypad on a Trilogy T3 prox lock.
View Answer
Answer:
Andy Phelps, Alarm Lock's National Training manager, shows you how to program a timed passage mode into a Trilogy T3 lock.
View Answer
Answer:
When configuring a DL/PDL4500 lock for Privacy Mode, first ensure the two white wires (with the black plugs) are connected correctly. These wires are connected to the micro switch that controls the initiation of Privacy Mode. Second, ensure the disc...
View Answer
Answer:
With the Narrow Stile locks, the metal key must be rotated fully before the lever can be used to retract the latch. The unit will remain unlocked as long as the key remains in the cylinder. To lock, simply rotate the key in the opposite...
View Answer
Answer:
After connecting the battery there is a small window of time during which the pressing and holding of the [AL] key will restore the factory default settings. Proceed as follows:
...
View Answer
Answer:
Before answering this question, it will be helpful to define lock "states":
...
View Answer
Answer:
The "Privacy" feature allows access through the door to individuals with User Codes and is typically used for rooms needing privacy from others such as bathrooms, dorms, meeting rooms and sleeping rooms in hospitals. When a model DL4500 or...
View Answer
Answer:
No, Alarm Lock double-sided locks are not "fail-safe" and are not "fail-secure". If a double-sided lock loses power, the lock does not change its state (locked or unlocked); the lock simply remains in the state it was in just prior to its loss...
View Answer
Answer:
Batteries that tend to drain quickly are often the result of either a simple mechanical issue or a programming oversight.
...
View Answer
Answer:
Yes, you can communicate with the PL3000 using the DL-Windows software only and without enrolling Function Cards. Proceed as follows:
...
View Answer
Answer:
Yes, a new feature (implemented in DL-Windows V5.2.3) allows batch enrolling of proximity cards in intervals over 100. Previous versions of DL-Windows only allowed up to 100 cards; the latest version allows this number to be changed in the...
View Answer
Answer:
It is not possible to enroll Function Card # 7 into the PL3000 lock using DL-Windows.
...
View Answer
Answer:
As shown in the images below, the Alarm Lock narrow stile "thumb-turn" is tapered, therefore the length and width described below were measured at the "base", i.e. nearest the face of the lock.
...
View Answer
40 Results Per Page | Showing
1-40 of 94 Results
| 1 |
2
|
3
