Results Per Page | Showing
1-40 of 87 Results
| 1 |
2
|
3
Answer:
iSeeVideo IVR - Supports systems that have new ISEE-IVR units only. For iPhones and Android smartphones.
...
View Answer
Answer:
In virtually all cases iSeeVideo devices will penetrate firewalls and allow iSeeVideo streaming video. However, more robust enterprise class firewalls may restrict inbound connections, blocking streaming video. In these cases port...
View Answer
Answer:
As shown in the screen images below, unsupported characters and symbols such as the apostrophe are widely used in surnames. Examples include the names O'Hara, D'Onofrio and other similar names.
...
View Answer
Answer:
Your ISEE-WAP Wireless Access Point is running older firmware that does not support the WiFi Analytics feature. We recommend you replace your older ISEE-WAP unit with a newer one (running firmware version 1.00.13R05 or later).
View Answer
Answer:
Ensure there are no unnecessary spaces when typing the User ID. Unnecessary spaces in the User ID or Password will cause the log-in attempt to fail, triggering an "Invalid Username or Password" response by the app.
View Answer
Answer:
Yes, you can connect more than six cameras on to one ISEE-WAP, but be aware that a maximum of 6 cameras are allowed for each account login.
View Answer
Answer:
Once logged into your account at videoalert.net, proceed to the "My Account" radio icon. On the Account page, scroll down to "My Registered Devices." Under this header, click the "paper and pencil" icon and when the "Device Details" page...
View Answer
Answer:
Yes, all of our iSeeVideo cameras have an integral microphone. At the www.videoalert.net website, click Advanced Settings for your camera; at the bottom of the page, check Microphone and then click Save.
...
View Answer
Answer:
The default password is "1234", and the default username is automatically generated using the "first 3 characters" of the subscriber's first name and the "last 4 digits" of their Phone number. For example, with the information shown in the...
View Answer
Answer:
No, the ISEE-IVR does not store audio with its recorded video, however, you can listen to audio when viewing live videos through your ISEE-IVR using your Internet Explorer browser. Note: Internet Explorer MUST be used ONLY.
View Answer
Answer:
No, the WAP does not need to be registered. Only the iSeeVideo cameras, the ISEE-SCHGW Video Gateways and ISEE-IVR Internet Video Recorders need to be registered on the ComNet Site.
View Answer
Answer:
Yes, two ISVWAP Wireless Access Points can be used to extend wireless coverage for iSeeVideo cameras. Alternatively, you can also use an ISV-REPT01 Wireless Repeater, which has the benefit of not requiring a cat5 connection.
View Answer
Answer:
The button is a "privacy" switch. When activated (on), the camera is disabled and cannot be used to view or record video, without needing to remove power from the camera. Use of this button disables the camera without breaking the...
View Answer
Answer:
Up to five (5) User IDs are allowed per account. One User is the Master, and the others are "standard" Users). If you need more than five, contact Technical Support.
View Answer
Answer:
Press and hold the Reset button for 15 seconds. This recessed Reset button is located in the hole next to the DC power plug in on the back of the camera, as shown in the image below. Use a paper clip or similar tool to press and hold down...
View Answer
Answer:
1. Visit www.ibridgeonline.com and log in with your Dealer User Name and Password. Click User Management > Manage Subscribers.
...
View Answer
Answer:
Many of the iSeeVideo cameras are UL Listed (the UL logo is typically located on the back of those cameras that are Listed).
...
View Answer
Answer:
Some Sonic Wall routers and other enterprise class corporate network firewalls require that you enter the mac address of the devices that require an IP address. Consult with the appropriate IT department to ensure the mac addresses of all...
View Answer
Answer:
The maximum amount of storage for iSeeVideo video clips is 50MB per camera. A recommendation is to set up a separate email address for your customer (e.g. Gmail or Yahoo) dedicated to iSeeVideo email alerts. At the website...
View Answer
Answer:
Yes, when using iSeeVideo along with iBridge, you can set up Events to trigger video, which would then have the ability to send text and email alerts upon this trigger.
...
View Answer
Answer:
If your iSeeVideo camera goes offline completely or intermittently, use the following Troubleshooting guide:
...
View Answer
Answer:
It is recommended to have at least 0.5Mbps or faster for your upload data transfer speed (bits per second).
View Answer
Answer:
iSeeVideo cameras support pixel-based motion detection, allowing the camera to send motion triggered video clips to the VideoAlert.net video server upon motion in a selected area.
...
View Answer
Answer:
To Create a Link to View a Single Camera:
...
View Answer
Answer:
To Create a Link for your Dealer Logo at the Login Screen:
...
View Answer
Answer:
After any firmware update, we recommend a hard reset be performed on all cameras to allow the factory default settings to load from the firmware update. On the camera, press and hold the Reset button for 15 seconds. Note: Defaulting...
View Answer
Answer:
If using wireless cameras, a Live Monitor Output is not supported. However, you can use an ISEE-SCHGW Single Channel Video Gateway or the new 4-Channel Gateway (available soon). These gateway modules have a Monitor Output BNC socket that...
View Answer
Answer:
You do not need the ISEE-WAP. Simply plug the two CAT5e cables of the IBR-ZREMOTE into the customer’s router. You may then use the iBridge app on a mobile device to connect to the customer’s wireless network.
View Answer
Answer:
The "WiFi Analytics" webpage allows you to change the Wireless Broadcast Channel on the ISEE-WAP Wireless Access Point. Note: Most wireless routers use channel 11; if you experience interference with this channel, use this webpage to...
View Answer
Answer:
The Arm/Disarm feature listed at the bottom is a quick way to enable or disable motion settings without the need to enter the Motion Settings webpage. Note: If motion detection is desired, the Motion Detection "window boxes" must still...
View Answer
Answer:
Click "Advanced Settings" to check if a firmware update is available. If so, you will see "Click here to update Firmware". Be aware that the update could take up to 5 minutes to complete.
...
View Answer
Answer:
1. Quit all Internet Explorer windows and reopen Internet Explorer. Click Tools > Internet Options > Security > Trusted Sites.
...
View Answer
Answer:
Verify all cameras are set with the same Time Zone (located under "Advanced Settings"):
View Answer
Answer:
The following explains the various options available in the iSeeVideo Administration screen in the iSeeVideo Website (www.videoalert.net):
...
View Answer
40 Results Per Page | Showing
1-40 of 87 Results
| 1 |
2
|
3
