FAQs

---

< Back to FAQs

With my Alarm Lock Trilogy T3 locks, how do I enable or disable Groups of users during the overnight hours?

To enable a Group overnight, use the following sequences:

EXAMPLE 1:  Users in Group 1 are allowed access overnight from 7 PM to 7 AM, Monday through Friday.  (In other words, Group 1 is disabled during the day from 07:00 to 19:00). 

1. Enter Program Mode: Enter the Master Code > [AL]. 
2. Set the Start Time (to disable Group 1) with Function 79:
   [AL] > 7 9 > [AL] > 8 > [AL] > 0 7 0 0 > [STAR]
3. Set the End Time (to enable Group 1) with Function 74:
   [AL] > 7 4 > [AL] > 8 > [AL] > 1 9 0 0 > [STAR]

If another Group is allowed access outside the times in the example above, the following key sequences can be used in conjunction with the example above:

EXAMPLE 2:  Users in Group 2 are only allowed access during the day from 7 AM to 7 PM (07:00 to 19:00) Monday to Friday.  (In other words, Group 2 is disabled overnight from 19:00 to 07:00). 

1. If not already in Program Mode, enter the Master Code > [AL].
2. Set the Start Time (to disable Group 2) with Function 80:
   [AL] > 8 0 > [AL] > 8 > [AL] > 1 9 0 0 >  [STAR]
3. Set the End time (to enable Group 2) with Function 75:
   [AL] > 7 5 > [AL] > 8 > [AL] > 0 7 0 0 >  [STAR]

If both examples are used simultaneously in the same lock, the result is:  Group 1 will only have access from 7 PM to 7 AM, Monday to Friday.  Group 2 will only have access from 7 AM to 7 PM, Monday to Friday.