FAQs
With my Alarm Lock Trilogy T3 door lock, I just created a new Passage Mode schedule using Function 72 and Function 73. However, after exiting Program Mode to place the lock "in use" (i.e. into "Normal Mode") why doesn't the lock immediately enter Passage Mode?
Functions 72 and 73 allow you to set a day and time that will trigger the lock to enter or exit Passage Mode, respectively. For the schedule to operate automatically, the programmed day/time must transpire while the lock is in "Normal Mode".
Optional: You can manually enable or disable Passage Mode by using Function 45 (Enable Passage Mode) or Function 46 (Disable Passage Mode). Your Passage Mode schedule will always override Functions 45 and 46 at the next scheduled day/time trigger.
Note: To ensure accurate scheduling, always be sure the lock is programmed with the correct date, time and weekday. Refer to the lock's programming instructions for details about these programming Functions.