FAQs
How do I enable a User Code to toggle Passage Mode?
Keypad Programming
To enable "Group 2 Toggles Passage Mode", place the lock into Passage Mode by pressing the Master Code followed by the ; key after the green light turns off. Once in program mode, press ;51;2:. In addition, be sure to add a User Code to Group 2 (users 101-150).
DL-Windows Programming
In DL-Windows, click the Lock Profile, then click Features.
In the Features screen (shown below), check the Group 2 Toggles Passage Mode checkbox.
As with keypad programing, you will also need to add a User code to Group 2 using the Global Users screen (shown below). First highlight the user and click Assign Groups.
Finally, at the bottom of the Group Assignment dialog (shown below), add a check to the Group 2 checkbox, then click Save.
