FAQs
What are the trouble codes and conditions for the Gemini GEM-P816, GEM-P1632, GEM-P3200, GEM-P9600, GEM-X255 and GEMC "C-Series" control panels?
NN = Device of zone number. Note: "E" messages not listed here are currently undefined and reserved for future use.
E01-00 – A/C POWER FAILURE
E02-00 – SYSTEM LOW BATTERY
E03-00 – COMMUNICATIONS FAILURE OVER A PHONE LINE
E04-NN – RF TRANSMITTER SUPERVISORY FAILURE
E05-NN – RF TRANSMITTER LOW BATTERY
E06-NN – RF RECEIVER RESPONSE TROUBLE
E07-00 – DOWNLOAD ATTEMPT FAILURE
E08-00 – TELCO LINE 1 FAILURE
E09-00 – SYSTEM COLD START (NO PANEL PROGRAM)
E10-NN – BURGLARY KEYPAD RESPONSE TROUBLE
E11-NN – BURGLARY KEYPAD/ ACM TAMPER
E12-NN – BURGLARY EZM RESPONSE TROUBLE
E13-NN – BURGLARY EZM TAMPER
E14-NN – RELAY BOARD RESPONSE TROUBLE
E15-NN – RF TRANSMITTER TAMPER
E16-NN – RF RECEIVER JAMMED
E17-NN – RF RECEIVER TAMPER
E18-NN – WIRELESS KEYFOB LOW BATTERY
E19-00 – USER PROGRAM MEMORY ERROR
E20-00 – DEALER PROGRAM MEMORY ERROR
E21-00 – SYSTEM SHUT DOWN
E22-NN – SENSOR WATCH ACTIVITY FAILURE
E23-00 – BURGLARY BUS FAILURE
E24-00 – SERVICE MESSAGE
E25-00 – COMMUNICATIONS FAILURE OVER INTERNET TCP/IP
E26-00 – SYSTEM GROUND FAULT
E27-00 – PRINTER FAILURE
E28-00 – FIRE BUS FAILURE
E29-00 – FIRE FBS BOARD TROUBLE
E30-NN – FIRE EZM AUX POWER FAILURE
E31-NN – FIRE EZM RESPONSE TROUBLE
E32-NN – FIRE KEYPAD RESPONSE TROUBLE
E33-NN – FIRE EZM TAMPER
E34-NN – FIRE KEYPAD TAMPER
E35-NN – SUPERVISORY RELAY TROUBLE
E36-NN – FIRE EZM GROUND FAULT
E37-NN – FIRE EZM A/C FAILURE
E38-NN – FIRE EZM LOW BATTERY
E39-00 – RF RECEIVER CAPACITY ERROR
E40-NN – RF DUAL TEC SELF TEST FAILURE
E41-00 – SYSTEM FIRE TROUBLE
E42-NN- CO ZONE TROUBLE
E51-00 – ALARM SUPERVISORY FAILURE
E54-00 – LOW BATTERY/AC FAIL FOR ACM #1
E55-00 – LOW BATTERY/AC FAIL FOR ACM #2
E56-00 – LOW BATTERY/AC FAIL FOR ACM #3
E57-00 – LOW BATTERY/AC FAIL FOR ACM #4
E58-00 – TELEMETRY TROUBLE
E59-00 – TELEMETRY FAILURE BETWEEN NL-MOD & PANEL
E66-00 – CLEAN ME SMOKE DETECTOR DIRTY
E99-00 – KEYPAD PANIC WIRE TROUBLE