FAQs
How do I remove the rim cylinder from Exit Trim (ETDL, ETPDL, ETDLN, ETPDN and ETPLN) series locks?
1. With the lock removed from the door, note the position of the half-moon shaped notch located in the spindle bushing (see arrow in the image below).
2. When the metal key is inserted and turned clockwise and counter-clockwise, this half-moon shaped notch will align with the half-moon shaped notches located to the left and right of the spindle bushing (see arrow in the image below).
3. Once the half-moon shaped notches are lined up (either left or right), you will have access to the screws that secure the spindle assembly. Remove these screws and work with the rim cylinder as needed.
4. Reverse the above steps to re-install the rim cylinder.