FAQs
I need the StarLink SLe-GSM mobile app to display the status of Area 1 on my alarm control panel, but my system has two or more Areas and the status is not working correctly, despite the installation being 100% correct. Is there a control panel programming setting that will change the way the E-lug functions such that the Napco StarLink SLe-GSM can transmit the system status of Area 1 to the mobile app on my phone?
Yes. If you are programming the control panel with PCD-Windows Quickloader software, open the System Assignments screen, System Options tab. If the control panel is a GEM-P1632 or GEM-P1664, select the check box "Lug E15 Armed Away Area 1 Only". If the control panel is a GEM-P3200, GEM-P9600 or GEM-X255, check the check box "Lug E4 Armed Away Area 1 Only".
This option is also available if you are programming with the keypad. See your control panel programming instructions for the correct direct address location.
This FAQ applies to the following Control Panel models: GEM-P1632 (Version 10 or later), GEM-P1664 (Version 30 or later), GEM-P3200 (Version 40 or later), GEM-P9600 (Version 40 or later), GEM-X255 (Version 40 or later).