FAQs
How do I configure the Relays and Relay Power on the Accelaterm (CICP2800)?
WARNING: WHEN APPLYING EXTERNAL POWER INTO JP4, YOU MUST BE VERY CAREFUL WHILE CONFIGURING JUMPERS JP5 AND JP6. FAILURE TO DO SO WILL RESULT IN DAMAGE TO THE UNIT.
Configuring Relays and Relay power on the Accelaterm (CICP2800) can be very challenging. Refer to the Accelaterm Service and Installation Guide (WI1989) and also the Accelaterm (CICP2800) Relay Configuration Guide (8 Door and 16 Door Configurations) located at the following Link:
http://tech.napcosecurity.com/index.php/techlibrary/downloadfile/id/1795/iframe