FAQs

---

< Back to FAQs

How do I program a panic button that is hardwired to the GEM-ACM1D?

Program a 24-hour panic button hardwired to the GEM-ACM1D as follows:

1. Wire the panic button to the door zone of the GEM-ACM1D with a 2.2k resistor.
2. Choose the zone and strap out the zone on the control panel or EZM with a 2.2k resistor.
3. In PCD-Windows Quickloader, program the zone as a 24-Hour Zone with no Swinger Shutdown.
4. In the System Assignment screen, System Options tab, be sure Enable ACM Access is checked.
5. In the Keypad Assignment screen, ACM Assignment tab, for the Door Ajar Zone, type the Zone Number you will be using.