FAQs

---

< Back to FAQs

How can I adapt the model SSW-iLM keypad (Linear LLC's IEI brand, www.linearcorp.com) for use on the Napco GEM-ACM1D or GEM-2D?

Program the IEI SSW-iLM keypad for Wigand standard 26-bit format as follows.

1. Program command 91   option 3 = 1   (Wiegand Front end)
2. Program command 91   option 6 = 1   (Red LED active state high)
3. Program command 91   option 8 = 0   (Green LED active state low)
4. Program command 92   option 1 = 1   (Wiegand format)
5. Program command 96   option 1 = 1   (Wiegand 26-bit format)

 

Wiring to the Gemini GEM-ACM1D or GEM-2D as follows:

Note:  A pull-up resister (500Ω or greater) is required between the Reader Power Positive and the Red/ Green LED Control Terminal.