FAQs
How can I “load factory defaults†in an NL-MOD-UL?
Newer versions of the NL-MOD-UL module have slightly different LED indications when performing the "Load Factory Default" procedure. If it is desired to "default" the NL-MOD-UL to return the unit to its original "out of box" condition, perform the following steps:
1. Remove power from the NL-MOD-UL device.
2. Remove jumper JP2.
3. Re-apply power. Wait about 60 seconds for the NL-MOD-UL to flash its LED once.
4. Replace jumper JP2.
Note: If the LED flashes every 15 seconds thereafter, this periodic flash indicates successful outgoing communications to our DNS Server.