FAQs
How do I wire a motion sensor to a "Request to Exit" button on the GEM-ACM1D?
Wire a motion sensor to a "Request to Exit" button with the GEM-ACM1D as follows:
1. Wire the motion sensor power to Door #1 power (D1 PWR terminals 3 and 4) or Door #2 power (D2 PWR terminals 5 and 6).
2. Wire the Data wires with a momentary normally open switch to the request to exit (RTE EXIT terminals 27 and 28). For the GEM-2D module, use RTE EXIT terminals 45 and 46.