FAQs
Is the iRemote-MOD compatible with all Gemini control panels when using its remote "virtual" keypad capability only (its integral NL-MOD Network Communication Module reporting capability disabled)?
Yes, the iRemote-MOD is fully compatible with the Gemini control panels listed below if using its remote "virtual" keypad capability only. This includes User and Dealer programming (except for control panel version 9A in the GEM-P816 & GEM-P1632). In version 9A, the iRemote-MOD will not allow the User to access User or Dealer programming. Note: Except for the aforementioned programming limitation, firmware version 9A still allows remote arming, disarming and viewing of system status.
Compatible with:
- GEM-P800: All Versions
- GEM-P801: All Versions
- GEM-P816: All Versions except dealer/user programming with firmware version 9A
- GEM-P1632: All Versions except dealer/user programming with firmware version 9A
- GEM-P1664: All Versions
- GEM-P3200: All Versions
- GEM-P9600: All Versions
- GEM-X255: All Versions
Note: If using the iRemote-MOD's internal NL-MOD, the control panel must meet the NL-MOD control panel requirements. If you have any questions, please contact Technical Support at 1-800-645-9440.
The iREMOTE-MOD Remote Control Module allows Napco control panels to be controlled by means of a "virtual" keypad displayed on a web page. Therefore, any operation that can be performed at the physical keypad can be performed remotely. In addition to the "virtual" keypad capability, the iREMOTE-MOD includes an integral NL-MOD Network Communication Module to allow central station reporting.