FAQs
I am able to connect to the iBridge IBR-ZREMOTE locally, but I am unable to connect remotely. What can I do?
A: Ensure that the IP Address of the iBridge Server is set correctly, as follows:
1. Run the NL-MODCONFIG software.
2. Click the PC Preset/RCM tab.
3. Click the Secondary/RCM tab.
a. Click the Populate NAPCO Defaults button.
b. Select IBR-ZREMOTE and click OK. Ensure the IP Address field is populated with the correct IP Address of the iBridge Server, as follows:
iBridge Server IP: 47.19.91.163
c. Download these changes to the IBR-ZREMOTE.
Note: On the bottom PC board located inside the IBR-ZREMOTE, ensure the red LED (marked "DS1") blinks once every 15 seconds, indicating a valid connection to the iBridge Server.
