FAQs
Can I configure the MAX2 communicator to use only one carrier?
Yes, although the automatic scanning of each integral SIM carrier slot is intended to increase the communication reliability of the StarLink SLE-MAX2-FIRE, if you wish to bypass the scan/selection process, or use a "single SIM" mode until communication is interrupted to force the use of the other carrier, set the NAPCO NOC Scan Delay After Power Up selection to "NO Initial Scan", and set the Scan Periodicity to "Turn OFF Scanning".
When the unit is in this mode, the only way to switch carriers is by manually initiating a Switch SIM at the NOC website or by pressing the MAX2 Switch SIM push button. Additionally, if at any time a failure of the current carrier network occurs, the unit will automatically switch to the second carrier. After switching, the unit will not switch again unless another Switch SIM is manually triggered, or another failure of the carrier network occurs.