FAQs

---

< Back to FAQs

How can I test the programming of an existing Test Timer feature?

To test the programming of an existing Test Timer feature:

1. Notify the central station of the impending test.
2. Set the date and time of the system control panel to five minutes prior to the programmed Test Timer start time.
3. Move the control panel configuration jumper to the bottom 2 pins.
4. Wait (about 45 seconds) for the keypads to display "XX out of system".
5. Move the jumper back to "NORMAL".
6. Wait another 45 seconds for the control panel to restart, then wait until the Test Timer is triggered.
7. Contact the central station and verify receipt of the test.