FAQs
With the GEM-P816, GEM-P1632, and GEM-P1664 control panels, how do I use PCD-Windows Quickloader software to program the Auto-Arm feature?
The GEM-P816, GEM-P1632, and GEM-P1664 control panels cannot be auto-disarmed, but the following instructions describe how to use PCD-Windows Quickloader software to enable the Auto-Arm feature at a specified time of the day on specific days of the week:
1. Select System Assignment:
2. Select System Options tab:
3. Check Enable AutoArm if not closed at end of Window in the Arm/Disarm dialog.
4. Select Apply:
5. Select Schedule Assignments:
6. Set your "Close" time:
7. Uncheck Time Disabled, then set the Start Time to 1 minute before the time to arm. Set the End Time to be the time that the Auto Arm is to be triggered. Select OK and download to the control panel.
