FAQs
Using the NAPCO NOC website (www.NapcoNOC.com) is there an easy way to duplicate the configuration within an existing StarLink Communicator when adding a second communicator?
The NAPCO NOC website (www.NapcoNOC.com) includes a new "Start template process" feature, allowing the programming data stored in an existing StarLink communicator to be copied and used as a guide or a "template", and transferred to a new second communicator. The NOC website still allows specific programming details in the new communicator to be selected later, if necessary. While programming a new communicator, use the Start template process feature as follows:
1. Click the Start template process link located in the General tab (circled in the following image):
2. Click Yes, please.
3. Type the Radio ID number of the "source" communicator, then click OK.
4. If the transfer process is successful, the popup reads "Nice", as shown:
If the transfer process is unsuccessful, a warning "Woah" appears in the popup. For example, the following image appears if the Radio ID of the receiving communicator is mistakenly entered:
5. After the transfer process is complete, check the communicator programming to ensure accurate duplication of the data.