FAQs
How do I set the StarLink Connect radio for the control panel manufacturer (NAPCO, HONEYWELL or DSC) ?
1. After registering the radio on www.NapcoComNet.com, you must log into the Radio Management Center at www.NapcoNOC.com, click the StarLink Connect tab, then click Panel Configuration.
2. In the pull-down fields, select the Alarm Panel Manufacturer (Napco, Honeywell or DSC), the Panel Type, and enter all other required information in their appropriate fields. When finished, click the Save Radio Configurations button.
The data will then be downloaded to the radio (the radio MUST be powered for the data to be received).
For NAPCO Panels:
Select the Panel Type, Keypad Type, Keypad Address, Master Security Code and PC Secuirty Code (if used). When finished, click the Save Radio Configurations button.
For Honeywell Vista Panels:
Select the Panel Type, Partition Number and Device Address. When finished, click the Save Radio Configurations button.
For DSC Panels:
Select the Panel Type and Partition Number. When finished, click the Save Radio Configurations button.
