Results Per Page | Showing 1-37 of 37 Results
| 1
Answer:
The PRETROFIT Translator Module is a wireless 345MHz to 433MHz translator that allows non-Prima sensors to be compatible with the NAPCO Prima Super Panel. The PRETROFIT translates the non-Prima unencrypted 345Mhz signals into encrypted 433MHz...
View Answer
Answer:
The Prima Super Panel is dual-path capable, primarily communicating through Wi-Fi with cellular available for emergency signal transmissions only.
...
View Answer
Answer:
This small button is the Test / Silence button.
...
View Answer
Answer:
To download and install the app on an Android device:
View Answer
Answer:
To access the Network screen, proceed as follows:
...
View Answer
Answer:
Access the Prima dealer portal website, go to System > Gateway Status, and reference the Hardware Type. The example system shown below is connected by cellular (the Hardware Type is "LTE").
...
View Answer
Answer:
If you have successfully assigned account numbers to Prima Super Panels in the past but are now seeing the screens similar to those shown below (in System > Options) that indicate, "This account is not currently monitored..." and "There are no...
View Answer
Answer:
To download and install the Prima app on an Apple iOS device:
View Answer
Answer:
If your Prima alarm or panic signals are not being received by your CS and are not appearing in the event history in the NAPCO Prima dealer portal website (www.NapcoPrima.Pro), check the following Super Panel settings:
...
View Answer
Answer:
No. If multiple authorized users are using the same arm/disarm passcode, it is not necessary to create a separate passcode for each user.
...
View Answer
Answer:
The Prima system was designed to be the main hub of your Z-Wave automation system. It cannot be used as a secondary hub for an existing system.
View Answer
Answer:
Yes. If you see a symbol on a Prima Super Panel screen that looks like the symbol shown below, it means that although the Prima system is connected to a Wi-Fi network (SSID), there is no active connection to the Internet.
...
View Answer
Answer:
Select the Settings menu ("hamburger" icon) at the top left:
...
View Answer
Answer:
1. In the Home screen, select the Settings menu ("hamburger" icon at the top left), then select Devices.
...
View Answer
Answer:
The following describes how to change the account number of a Super Panel after it has already been registered and activated. Note: All confidential information has been erased from the images that follow.
...
View Answer
Answer:
The Transmission Delay (also called "Abort Delay") duration allows for the cancellation of the central station alarm report by the disarming of the Prima Super Panel before a report is sent. If the delay period ends without disarming, an alarm...
View Answer
Answer:
If your doorbell was successfully added to your Prima system and are receiving notifications but not video feed, ensure you have a Prima service plan that includes video, as follows:
...
View Answer
Answer:
The NAPCO Prima dealer portal website (www.NapcoPrima.Pro) allows you to add new (and delete existing) Prima Super Panels (called "gateways" in the website).
...
View Answer
Answer:
To silence your Prima Super Panel arming/disarming voice announcements:
...
View Answer
Answer:
The Prima Super Panel Smash & Grab feature is designed to enhance the security of your premises by detecting unauthorized attempts to tamper with the security panel during an armed state.
...
View Answer
Answer:
A Unit ID is a unique identifier assigned to each Prima Super Panel. It is displayed in the following locations:
...
View Answer
Answer:
Yes, to reboot your Prima Super Panel without removing the power source and backup battery, use the following menu-driven reboot method:
...
View Answer
Answer:
If you need to reset your Prima Super Panel back to its factory default condition, proceed as follows, but be aware that resetting will completely remove all settings, sensors, devices, and monitoring settings.
...
View Answer
Answer:
The Prima Super Panel features dual-path capability: Wi-Fi serves as the main pathway, with cellular connectivity reserved solely for emergency backup signal transmission. It is recommended not to operate the Prima solely with cellular...
View Answer
Answer:
-----------------------------------------
...
View Answer
Answer:
Stock Music provided by septaudio, from Pond5(Stock Music: https://www.pond5.com/royalty-free-music/item/68051837-corporate-technology)(Pond5: https://www.pond5.com/)
View Answer
Answer:
The initial pairing of the PWD window / door transmitter to the Prima Super Panel requires triggering the transmitter by removing the battery pull tabs and separating the magnet from the transmitter. This triggering of the transmitter must be...
View Answer
Answer:
If the message "XP02SNet isn’t responding" appears on the Prima Super Panel screen after starting up, the two choices that appear are "Close app" and "Wait":
...
View Answer
Answer:
The NAPCO Prima PBELL is a smart, self-healing Wi-Fi HD video security doorbell powered by your existing doorbell's 10-30VAC wiring. The doorbell LED colors and patterns indicate varied system activity:
View Answer
Answer:
Yes. At the top of the home screen, look for a small horizontal line directly under the camera lens. Swipe down this line with your finger to open the Volume/Brightness menu.
...
View Answer
Answer:
Open the Android or iPhone Prima app.
...
View Answer
Answer:
Included with your Prima power supply is a plastic Outlet Lock with pressure-sensitive adhesive, a cable zip tie, and a longer than usual wall plate screw. Proceed as follows:
...
View Answer
Answer:
At the top of the Home Screen (shown below, left), notice the small horizontal line at the top of the screen. Use a fingertip to swipe this down and the Volume/Brightness controls appear (shown below, right and bottom).
...
View Answer
Answer:
Only an administrator with a Master login can add new users.
...
View Answer
Answer:
When creating a Prima account, set up the Master user for app access.
...
View Answer
Answer:
Upon registering your first Prima Super Panel, you will receive an email with a Prima dealer login for the website www.NapcoPrima.pro.
...
View Answer
Answer:
1. Register the Prima control panel at www.NapcoComNet.com. Note that dealers that are new to NAPCO remote services must register at ComNet; the approval confirmation can take up to 24 hours.
...
View Answer
40 Results Per Page | Showing 1-37 of 37 Results
| 1
