Results Per Page | Showing 1-9 of 9 Results
| 1
Answer:
Log in to the FireLink Cloud Programming Portal (www.FireLinkPro.com). In the portal Home screen:
...
View Answer
Answer:
When Supervisory Alarm Auto Reset is enabled, if a Supervisory zone is activated, the supervisory "SUPV" icon and keypad sounder automatically reset when the condition clears. To program this feature in the FireLink Cloud programming portal...
View Answer
Answer:
Yes! When a fire alarm activates, the Heating, Ventilation, and Air Conditioning (HVAC) system is generally required to be shut down to prevent the spread of smoke and fire. After a fire alarm-triggered shutdown, the HVAC system does not...
View Answer
Answer:
NFPA 72 and UL 864 prohibit remote downloading to a Fire Alarm Control Panel unless a qualified technician is physically at the control panel installation site. To ensure a technician is on site, the Fire system keypad must first be unlocked...
View Answer
Answer:
No, it is not possible for a user to add or delete user codes through keypad programming. The only similar user code function available is to update a known user code already programmed in system.
View Answer
Answer:
Models: All FireLink, Firewolf* and GEMC* Fire Panels (FL-xxx, FLX2-xxx, GEMC-FW-xxx, GEMC-COMBOxxx)
...
View Answer
Answer:
Beginning with the 1996 edition of NFPA 72, fire alarm systems that contain more than two strobes in a room or space require synchronization. Since then, all manufactures have produced Horn/Strobes and Strobes that will Synchronize.
...
View Answer
Answer:
The FireLink control panel has a pre-loaded Easy Default Program intended for sprinkler supervisory or basic conventional fire applications. For applications outside the scope of the default program, the FireLink system may be programmed Over-The-Air...
View Answer
Answer:
The FireLink control panel can support up to 6 remote annunciators, and all must be addressed in consecutive order as numbers 02 through 06. By default, the control panel annunciator is configured and programmed for address 01 and must not be...
View Answer
40 Results Per Page | Showing 1-9 of 9 Results
| 1
