Results Per Page | Showing 1-33 of 33 Results
| 1
Answer:
After successfully integrating the NAPCO E-Access controller with a burglary alarm control panel (such as the Gemini GEM-P3200), the NAPCO E-Access controller can only disarm the burglary alarm. The NAPCO E-Access controller cannot arm the...
View Answer
Answer:
The following readers and ArchiTech locks have Bluetooth capabilities and will work with the NAPCO E-Access system:
...
View Answer
Answer:
THREAT LEVEL is a feature of the E-Access system that allows you to temporarily modify or bypass the existing Schedules and Access Level privileges.
...
View Answer
Answer:
Yes, the easiest way to maintain your existing User list is to use the Export and Import features located in SETTINGS.
...
View Answer
Answer:
After the RMC is licensed, you must go to SETTINGS and ensure the "CONNECT TO RMC" setting is set to ON, and the Network Status displays OK.
View Answer
Answer:
No, the RMC feature must be purchased and must be added to the license. After it is licensed, you must go to SETTINGS and ensure the RMC is set to ON, and the Network Status displays OK.
View Answer
Answer:
In NAPCO E-Access, the facility code is part of the badge format. If you have two 36-bit badges with different facility codes, you must enter two different 36-bit badge formats. The badge format includes the facility code.
View Answer
Answer:
No. NAPCO E-Access strike relay numbers are fixed and cannot be changed.
View Answer
Answer:
When you create a shortcut for RMC, do not use the URL from the "Secure Link" in RMC. If you do use this URL, the port number will change, and the shortcut will no longer work. The proper way to create a shortcut for RMC is to go into RMC > Device...
View Answer
Answer:
The NAPCO E-Access controllers support up to a 16 Gig SD-Card, formatted with FAT32.
View Answer
Answer:
The maximum amount of users supported is 5 users for a Basic license, and 10 users for the Advanced license.
View Answer
Answer:
Note: The "Open Cesame" App is not posted under Napco Security Technologies yet.
...
View Answer
Answer:
As of October, 2022, the Napco E-Access Mobile App is not available yet. Please check with the Napco Technical Support group, to find out if it's available yet.
View Answer
Answer:
When configuring a badge in E-Access, you must apply an Access Level to the badge. On the screen where you apply the Access Level, the TYPE should display "INDIVIDUAL". If TYPE is configured for "Access Level Group", there is more chance of having a...
View Answer
Answer:
To swap the license from the defective controller to a new controller, you must use the "Swap Key" function. This allows you to transfer the license key from one Controller or panel to another.
...
View Answer
Answer:
The Napco E-Access Mobile App username and password is case sensitive. Please verify you type in the Username and Password with the correct case (Capital or lower case characters).
View Answer
Answer:
Yes, you can configure an INPUT to unlock the door. First, go to settings and define your inputs under the device settings, next go to settings, Event Action, click on Event Action and create your action there.
View Answer
Answer:
The license is available with 32 or more doors.
View Answer
Answer:
Yes...Napco E-Access offers an Export utility and an Import Utility.
...
View Answer
Answer:
Note: As of October 2022, the "Open Cesame" App is not posted under Napco Security Technologies yet.
...
View Answer
Answer:
NO...Only Weigand Keypads are supported and they require a badge format in the E-Access software.
View Answer
Answer:
You need to make sure that if there are door contacts, that the person needs to complete the action and open the door. To avoid event, do not use door contacts.
View Answer
Answer:
You need to create the keypad format under Card Formats, and assign it in the Doors screen.
The steps for Card and Pin starts with Pin first then card swipe.
Very Important - The reader and keypad need a badge format for each.
View Answer
Answer:
Swipe the badge at a reader. In the event grid, click on the "Card Format Not Found Blue link". This will then bring you to the badge format screen to create the missing badge format.
...
View Answer
Answer:
Using the Napco E-Access Decoder, scan the Napco 36-bit badge. Modify the settings as per below.
...
View Answer
Answer:
Upon logging into the Napco E-Access controller, click the wand icon below for the programming Wizard. The wizard will step you through all the programming screens. Click the Next and Prev buttons to click through the Wizard.
...
View Answer
Answer:
To view the Napco E-Access license information, click the License icon on the bottom of the screen (looks like mobile phone). Click Edit and then click License Server. The features that are enabled will display on the under Options.
View Answer
Answer:
The Napco E-Access documentation can be found in the Napco Document library. Click on Products >Napco E-Access button.
...
View Answer
Answer:
Napco E-Access has an integrated ONVIF profile S video storage solution. E-Access platforms use this technology to provide several capabilities. First it provides a low-cost alternative solution to store tagged video event. This function allows each...
View Answer
Answer:
The Napco E-Access controller is considered a hybrid system. It can be managed from the cloud and is also On-Premise. If you wish to configure it for Cloud management, you must purchase the RMC (Remote Management Console) feature. This feature must...
View Answer
Answer:
The latest Firmware image as of October 2022 is 5.00-04h.
...
View Answer
Answer:
To discover a new Napco E-Access controller, you must use the Smart IP-Finder utility.
The Smart IP-Finder utility can be downloaded from the Napco Document library, under Products> Napco E-Access.
View Answer
Answer:
To update a Firmware image on a Napco E-Access client, go to Settings > Client management screen. The Firmware image on the client, must be the same Firmware version as the Napco E-Access Server. For a client, you download the Firmware image and...
View Answer
40 Results Per Page | Showing 1-33 of 33 Results
| 1
