Answer:
Yes. This log uses the last group of users depending on the control panel and the number of available users.
...
View Answer
Answer:
The AL-PCI is an interface cable that allows for high-speed communication between a PC running DL-Windows software and a compatible Trilogy Digital Lock or an AL-DTM Data Transfer Module. Using the AL-PCI cable, the PC can upload or download...
View Answer
Answer:
NO- The CAE/NAE strike relay numbers are fixed, and can't be changed.
View Answer
Answer:
Each RMC system has one server and many clients. You need to purchase on RMC license for the one server to manage the whole E-Access system.
View Answer
Answer:
To ensure that fire troubles are reported to the central station, install Jumper 5 on the "X5" jumper block when using input 2 (IN2). Install Jumper 4 on the "X5" jumper block when using input 3 (IN3).
View Answer
Answer:
Yes. You can export a .csv (Comma Separated Values) file to Excel. Click Tools > Export Global Users to .CSV. Select a file path destination as desired. Open the .csv file with Microsoft Excel (example shown in the image below).
View Answer
Answer:
If the NVR feature is enabled, the Thumb drive feature will record video from ONViF compatible cameras and store the video on a Thumb drive.
To connect to a ONVIF camera, you must use RTSP to connect and you must use Internet Explorer.
View Answer
Answer:
Yes, the remote transmitter is needed to program the RR-PM1200 magnetic lock. The RR-PM1200 magnetic lock must first be unlocked with a valid remote transmitter to allow entry into program mode. Note: If the remote transmitter (the infrared keyfob...
View Answer
Answer:
The signal range should be very reliable up to 50 feet. The signal may, for some users, be acceptable up to 100 feet, based upon environment and line-of-sight, but is not guaranteed to 100 feet.
View Answer
Answer:
Keypad Configuration Mode is an extension of Dealer Program Mode wherein data is entered at the keypad by the individual address location. Keypad Configuration Mode (also called Direct Address Programming) allows you to use a keypad to go...
View Answer
Answer:
A single GEM-KEYF can only arm and disarm the Area for which it is programmed. If your system contains multiple Areas, separate GEM-KEYF key-fobs can be programmed to control each Area.
...
View Answer
Answer:
Yes. If you wish to purchase an Exit Trim battery extension wire, call Customer Service at 800-252-5625 and ask for part number W888, "Exit Trim Wire Extension Assy".
...
View Answer
Answer:
Remove the transmitter rear cover to access the battery holder. Find the two gold-colored metal contacts on opposite sides of the CR2032 battery. Using a small flat tool such as a 1/8" screwdriver, locate the space between the gold...
View Answer
Answer:
With the Gemini GEM-TRANS2 Window / Door Transmitter, GEM-RTRANS Recessed Window / Door Transmitter, GEM-TRANSLP Low Profile Window / Door Transmitter:
...
View Answer
Answer:
The Model 44 is a fully mechanical device used with double-door installations that do not have a center mullion (a mullion is a slender vertical member that forms a division between two doors). The Model 44 is mounted to the inactive door,...
View Answer
Answer:
Ensure the magnetic lock (maglock) is powered by disconnecting the momentary button wires and connecting them together. If the magnetic lock releases the door, the momentary release button likely needs to be replaced.
...
View Answer
Answer:
Yes...Most SMS providers are supported.
Refer to the SMS (Texting) configuration guide in the Continental Document library.
View Answer
Answer:
Log into www.Sabrent.com and click Support.
...
View Answer
Answer:
The PCI2000 Computer Interface Module provides the means for interconnecting your PC to a Napco control panel for local or remote uploading and downloading. The PCI2000 is provided with a special custom 10-conductor computer cable (part #...
View Answer
Answer:
If the lock is in Passage Mode and either the privacy button is pressed or the inside dead bolt latch is turned, the locked status will override Passage Mode until the inside lever or dead bolt is retracted, thus returning the lock to the previously...
View Answer
Answer:
Although in DL-Windows you may get a "Loop Back Passed" message for more than one COM port, DL-Windows only supports communication with one device at a time.
View Answer
Answer:
Yes, there are third party companies that offer weather resistant covers that are compatible with most of our locksets. An example is shown in the image below:
View Answer
Answer:
Yes! The model PP100 Battery Eliminator is designed to replace all power normally supplied by the device's internal batteries. As an added benefit, the PP100 allows the standard internal batteries to be used as a battery backup if AC...
View Answer
Answer:
Although User Codes can be printed, as shown in the sample image below, proximity card information cannot be printed in the audit trail.
View Answer
Answer:
Take note of the "Lock ID" in the DL-Windows DTM Screen. The AL-DTM MUST first be in "Door Select Mode" to assign the Lock ID. If unable to select "Door Select Mode", the AL-DTM must be configured to work in "Door Select Mode". For...
View Answer
Answer:
The Marks relay used for maglocks, electric strikes and other external devices functions as a solid state device and not as a mechanical relay device. Therefore, the normally open / normally closed operation is controlled by lock programming....
View Answer
Answer:
Yes, the GEM-ACM 1D will continue to operate even if disconnected from the keypad bus.
View Answer
Answer:
The GEM-ACM works with two card types: The HID 26-bit (Napco part # GEM-H1326C) and the Napco proprietary 36-bit card (Napco part #GEM-PX). Note: The GEM-PX cards only work with the GEM-PX Proximity Reader.
View Answer
Answer:
For models GEM-TRANS2, GEM-PIR, GEM-DT, GEM-KEYF, GEM-SMK, GEM-GB and the GEM-TRANSLP, the frequency is 319.5MHz, and the power output is 1mW (a milliwatt, or one thousandth of a watt).
View Answer
Answer:
The SLE-DLCBL is a download cable 6 feet in length, used with the StarLink SLe-GSM radio. This cable can be used in place of your PCI Mini and PCI 2000 download cable as well.
View Answer
Answer:
Using an iPad to search the Apple app store, only iPad apps will appear in the search results. Since the "My Remote Keypad" app was originally designed for the iPhone, the app will be listed in the iPhone apps area. Simply click the...
View Answer
Answer:
The GEM-WP can be programmed as a zone on the control panel. The point number should always be 3; point 3 indicates to the control panel that it is a keyfob or pendent type transmitter, i.e. it is portable and may be removed from the premises...
View Answer
Answer:
Try the following settings for the Blue Napco USB only.
...
View Answer
Answer:
Using the GEM-RP2ASe2 keypad to program the GEM-WP as a panic device for the GEM-P1632 control panel, proceed as follows:
...
View Answer
40 Results Per Page | Showing
1-40 of 55 Results
| 1 |
2
