Results Per Page | Showing
1-40 of 95 Results
| 1 |
2
|
3
Answer:
If DL-Windows V5 is not sending Features to your lock, a likely cause is a missing Security Password for the Account.
...
View Answer
Answer:
To connect a model ETPDNSRX to a Networx system, use the profile option for the ETPDNRX in DL-Windows.
View Answer
Answer:
DL-Windows Database Migration Using SSMS
...
View Answer
Answer:
Data Transfer Modules allow the transfer of lock programs and other data between DL-Windows software and Alarm Lock locking devices. For step-by-step instructions, see this video Tech Tip:
...
View Answer
Answer:
1. Run Device Manager, right-click Silicon Labs CP210x device and select Properties.
...
View Answer
Answer:
To export a list of the Global Users in a comma-separated value .csv file:
...
View Answer
Answer:
In DL-Windows, select Tools > Export Account.
Save the .acc file to a USB thumb drive, then insert that thumb drive into the other PC. Install DL-Windows into the other PC, open DL-Windows and select Tools > Import Account.
View Answer
Answer:
Troubleshooting DL-Windows Connection Issues:
...
View Answer
Answer:
When adding proximity cards to DL-Windows, a Sequential Add utility is available if you have a block of cards you wish to add in sequence. For example, card numbers 1093600 through 1093700 with all other card attributes (Card Type, Card Number...
View Answer
Answer:
For the answer, see this video:
...
View Answer
Answer:
DL-Windows will only run on a Windows PC.
...
View Answer
Answer:
There is no need to uninstall and re-install the software.
...
View Answer
Answer:
Yes. The account file(s) from DL-Windows version 5.5.3 are fully compatible with DL-Windows version 5.5.4 and can be imported directly into version 5.5.4.
...
View Answer
Answer:
DL-Windows requires administrator rights to run (i.e., "Run as administrator"). This means that every time you run DL-Windows, you are granting DL-Windows special permissions to access certain parts of your Windows PC that would otherwise be...
View Answer
Answer:
If an SQL Express 2012 installation results in a "Fusion Active Template Library (ATL)" failed status, proceed as follows:
...
View Answer
Answer:
To use DL-Windows to enable only one PIN code during selected time intervals:
...
View Answer
Answer:
For Existing / Upgrade Installations Only!
...
View Answer
Answer:
For existing DL-Windows V5.5.3 installations, click here.
...
View Answer
Answer:
If your PC is running Windows 10 and you are unable to install SQL 2012, try the following steps:
...
View Answer
Answer:
1. In the Global Users screen, highlight the user.
...
View Answer
Answer:
Before You Begin, Back Up Your Database
...
View Answer
Answer:
Yes! Launch DL-Windows. In the main screen, right-click the selected lock. In the selections that appear, there are three related options:
...
View Answer
Answer:
In DL-Windows, click Features > Relay tab. Check to enable Failed Entry Attempt. When an incorrect, invalid or disabled User Code is entered, the lock’s integral relay will close, triggering an access control panel or another auxiliary...
View Answer
Answer:
No, there is no need for DL-Windows and SQL to both be installed on the same server.
...
View Answer
Answer:
No, Microsoft® SQL Server® 2012 Express is included with the software, and was the version used for all internal testing. However, DL-Windows V5.5.3 will also work with SQL Server versions above 2012, such as 2014, 2016, 2017 etc.
View Answer
Answer:
Uninstall SQL through the Add or remove programs utility, located in the Control Panel (located in Control Panel\All Control Panel Items\Programs and Features).
...
View Answer
Answer:
A "VLAN," is a logical subgroup within a local area network created by using software rather than manually rearranging cables in the data center.
...
View Answer
Answer:
Yes! DL-Windows versions 5.3.3, 5.4.2 and 5.5.3 each include an automatic backup feature that creates an image of your database and stores it on your local C: drive. By default, the automatic backup frequency is Monthly. To increase or decrease the...
View Answer
Answer:
Yes! In DL-Windows, click the Wireless button, add a check to select each individual lock (or right-click the Enable column and click Select All). In the Function column, select Send Profile and click Start to communicate all changes to the selected...
View Answer
Answer:
DL-Windows V5.5.3 (or later) has the ability to program a Schedule for the Main or Aux relay separately. Therefore, one door can be programmed to operate on a Schedule, and the other door can remain unchanged. Proceed as follows:
...
View Answer
Answer:
In DL-Windows 5.4.2 (and prior), click Export Log to export the Event Log as a CSV format file.
...
View Answer
Answer:
When you install DL-Windows, it creates an entirely different instance of SQL that resides side by side with other existing programs that already use SQL. When the DL-Windows installation process runs, it renames the DL-Windows instance of SQL as...
View Answer
40 Results Per Page | Showing
1-40 of 95 Results
| 1 |
2
|
3
