Results Per Page | Showing 1-11 of 11 Results
| 1
Answer:
To Create a Link for your Dealer Logo at the Login Screen:
...
View Answer
Answer:
In addition to its outstanding abilities as a high-resolution outdoor wireless camera, the Napco ISV WLOCAM infrared IP camera has features that allow the use of its integral PIR motion sensor and pixel-based analytics to be used as a wireless...
View Answer
Answer:
Our ISeeVideo VIP devices support the "2-way audio" feature. To enable, log in as a Master User and click the "Tools" icon (wrench and screwdriver) to open the Advanced Settings screen. In the Audio category located at the bottom of the...
View Answer
Answer:
In virtually all cases our ISee Video VIP devices will penetrate firewalls and display video at the iSee Video website at a frame rate of approximately 20fps. However, more robust enterprise class firewalls may restrict bandwidth at a level...
View Answer
Answer:
While the VCAM-I and VIP-Gateway are assigned static IP addresses, they can operate on a DHCP network. In addition to its IP address, each device must also be assigned an alphanumeric name to make it easy for the user to remember and find. Every 16...
View Answer
Answer:
No – the VIP-Gateway converts up to 4 analog cameras into Network IP cameras and the VCAM-I is an IP ready camera. The VCAM-I cannot be interfaced to the VIP-Gateway. If multiple IP cameras are needed on a site, it would be more cost effective...
View Answer
Answer:
The camera and the VIP-Gateway both have built-in motion detection capability, with sensitivity adjustments and a time schedule. They can be armed by schedule to trigger an event upon motion detection.
View Answer
Answer:
The NAPCO VCAM-I IP and VIP-Gateway transmit to the server approx. 12 seconds of pre-alarm (before trigger) and 18 seconds of post-alarm video for a total of 30 seconds.
View Answer
Answer:
The VCAM-I AP application is for configuring the VIP-Gateway and VCAM-I devices during installation and maintaining the settings remotely. It should not be left with the customer. While the VCAM-I AP can technically be used as a viewer for the...
View Answer
Answer:
A short occurs on the n/o trigger input of the device (VIP-Gateway or VCAM-I).
...
View Answer
Answer:
The NAPCO VIP-Gateway and VCAM-I IP both send compressed video clips to the NAPCO Video Alert server upon activation of the module’s trigger input(s). This trigger activation is accomplished by placing a momentary short across a normally open...
View Answer
40 Results Per Page | Showing 1-11 of 11 Results
| 1
