Results Per Page | Showing 1-7 of 7 Results
| 1
Answer:
Program for dry contact to change state when a fire alarm or a panel trouble condition occurs. The following is for an additional annunciation panel (not a keypad):
...
View Answer
Answer:
Yes. The FW-2S 2-Wire Smoke Detectors can be used with UL Listed control panels without using the integral sounder, thus eliminating the need for using the FW-RM1 Reversing Module with NAPCO Gemini control panels or using the GEMC-SDW...
View Answer
Answer:
No, it is not possible for a user to add or delete user codes through keypad programming. The only similar user code function available is to update a known user code already programmed in system.
View Answer
Answer:
How to use the "Primary Status and Controls" tab in the FireLink cloud programming web portal (or the FireLink mobile app) to retrieve the status of the SLC Signaling Line Circuit module (the hardwired interface between the SLC devices and the...
View Answer
Answer:
The FireLink FACP is shipped with a factory default program already set to report to your central station. In general, the additional steps are: Register the radio communicator, connect all field wiring, add resistors to all unused zones and NACs,...
View Answer
Answer:
Use the Gemini C-Series (GEMC) Standby Calculation Worksheet located in our Technical Library website:
...
View Answer
Answer:
The FireLink FACP comes with a factory default program already programmed to report to your central station. All you need to do is register the radio communicator portion, connect all field wiring, install EOLRs on all unused zones and NAC circuits,...
View Answer
40 Results Per Page | Showing 1-7 of 7 Results
| 1
