Answer:
This video describes how to:
1. Become a registered dealer.2. Activate the device.3. Program the device.
View Answer
Answer:
No, you do not need to register the device on the ComNet website if you are using an iBridge IBR-ZREMOTE, iREMOTE-MOD or NetLink NL-MOD only for IP reporting to the central station.
View Answer
Answer:
The only way to transfer a StarLink communicator from one company to another is to perform a device transfer procedure in direct coordination with the NAPCO ComNet department. The previous company wishing to hand-off (release) the device must place a...
View Answer
Answer:
Log in to www.NapcoComNet.com with your dealer information. Click My Subscribers (at the top of the screen, as shown below).
...
View Answer
Answer:
Quickloader - TC/PIP (NL-MOD)........ Port = 10081
...
View Answer
Answer:
There are several communication methods you can use to connect to your existing control panels:
...
View Answer
Answer:
In the NL-MODCONFIG software, open the PC preset/RCM tab, click the Populate NAPCO Defaults button and select the option for the module type you are working with. Repeat the same steps for the Secondary/RCM tab then download to the module.
...
View Answer
Answer:
1. Registration at www.NapcoComNet.com
...
View Answer
Answer:
When using TCP/IP communications to connect to your Gemini control panels, note the following two options under TCP/IP Communications:
...
View Answer
Answer:
Yes, the iREMOTE-MOD is compatible with the Gemini C-Series (GEMC) control panel, but with the Burglary area only. A GEMC-BK1 Burglary keypad skin is available for use on the www.MyRemoteKeypad.com website and for the iRemote App.
...
View Answer
Answer:
If you are unable to search for and find your iBridge IBR-ZREMOTE, iRemote-MOD or NL-MOD module(s) using the NL-MODCONFIG software (version 3.0.3.0 or later), perform the following:
...
View Answer
Answer:
Yes, the iRemote-MOD will operate with the GEMC Burglary section only (Note: For non-UL applications only). A keypad skin is currently available through www.myremotekeypad.com, however a keypad skin for the iRemote-MOD app will be...
View Answer
Answer:
The "Keypad Type" was not selected during the first web log in process (Keypad Types are normally the GEM-K1CA or GEM-RP1CAe2). In addition, ensure both CAT5 cables are securely attached, and the red LED is blinking every five seconds.
...
View Answer
Answer:
1. Only one (1) user is allowed to be logged in at any one time. If you are still logged in to your iPhone, Android or through the iRemote website, ensure you have logged out successfully.
...
View Answer
Answer:
Try using 4444, 5555, 8888 or 9999 as your "Old Compat" number. If these numbers do not work, then a "Compat #" must have been set in the past and cannot be defaulted. Please contact Technical Service at 800-645-9445 or 631-842-9400 for...
View Answer
Answer:
The default password is "1234", and the default username is automatically generated using the "first 3 characters" of the subscriber's first name and the "last 4 digits" of their Phone number. For example, with the information shown in the...
View Answer
Answer:
Up to five (5) User IDs are allowed per account. One User is the Master, and the others are "standard" Users). If you need more than five, contact Technical Support.
View Answer
Answer:
No, you do not need an IBR-ZREMOTE nor do you need an iRemote-MOD in order to connect the hardwired iBridge tablet (IBR-ITAB-HW) to a Gemini control panel and use the tablet only as a keypad. NOTE: If you are using an IBR-ITAB wireless tablet,...
View Answer
Answer:
You will need to port forward ports 5002 and 5011 for the iRemote-MOD (select TCP or both TCP/UDP for the protocol) and port 5001 for the NL-MOD (select TCP or both TCP/UDP for the protocol).
...
View Answer
Answer:
The following explains the functions available in the My Remote Keypad Admin screen.
...
View Answer
Answer:
Port forwarding (also called "port mapping") opens a specific port number in a router or firewall (in a private network) to allow network packets from the outside world with that port number to pass through.
...
View Answer
Answer:
You must give your customer a unique user ID for each location. There is only one iRemote-MOD allowed for each user ID.
...
View Answer
Answer:
NOTE: This pertains to Control Panels GEM-P1632 / GEM-P1664 v10 or greater, GEM-P3200 / GEM-P9600 v30 or greater, and GEM-X255 v4 or greater; and explains how to configure Area1 to control a set-back thermostat via the iRemote.
View Answer
Answer:
As a Dealer in MyRemoteKeypad.com and VideoAlert.net, you can assign your iRemote-MOD at both websites for customers who also have an ISeeVideo camera system. This will give your customers the opportunity to use their iRemote normally at...
View Answer
Answer:
After checking that the iRemote-MOD is configured correctly with the control panel as detailed in the installation instructions, use these troubleshooting tips if necessary:
...
View Answer
Answer:
After checking that the iRemote-MOD is configured correctly with the control panel as detailed in the installation instructions, use these troubleshooting tips if necessary:
...
View Answer
Answer:
After checking that the iRemote-MOD is configured correctly with the control panel as detailed in the installation instructions, use these troubleshooting tips if necessary:
...
View Answer
Answer:
After checking that the iRemote-MOD is configured correctly with the control panel as detailed in the installation instructions, use these troubleshooting tips if necessary:
...
View Answer
Answer:
1. Wire the network connection from your iRemote-MOD to a valid Internet source on the network (for example, a router or switch to provide an access point).
...
View Answer
Answer:
Our Napco iSeeVideo www.videoalert.net and iRemote www.myremotekeypad.com websites both have mobile counterparts that you can install into a BlackBerry mobile device.
...
View Answer
Answer:
The iRemote-MOD is compatible with all Gemini control panels regardless of the control panel firmware version installed when used only for Virtual Keypad access. However, when using the NetLink TCP/IP communications feature for:
...
View Answer
Answer:
To update the NL-MODCONFIG software, proceed as follows:
...
View Answer
Answer:
Connect a single wire from the "Supv." output terminal on the iRemote-MOD or NL-MOD to the positive (+) side of "ANY" zone with a 2.2k resistor in parallel. The iRemote-MOD "Supv." output will go to low voltage upon losing its Internet...
View Answer
Answer:
Yes, the iRemote-MOD is fully compatible with the Gemini control panels listed below if using its remote "virtual" keypad capability only. This includes User and Dealer programming (except for control panel version 9A in the GEM-P816 &...
View Answer
Answer:
This message (see above) appears when the TCP/IP Communications feature is not enabled in the control panel program. To enable in Quickloader, go to the Digital Communications screen, Digital/Dialing Options tab and check the "TCP/IP...
View Answer
Answer:
The message "Socket state: 9" appears when the NL-MOD is unreachable by the IP address used. This message can appear if the IP address is incorrect, if the NL-MOD is offline, or if there is a firewall preventing access on port 10081. If...
View Answer
Answer:
The error "Invalid response received" appears (see image below) when the NL-MOD is reachable but communication does not exist between the NL-MOD and the control panel. This can occur if the local download cable is disconnected or damaged, or if...
View Answer
40 Results Per Page | Showing
1-40 of 45 Results
| 1 |
2
