Results Per Page | Showing 1-9 of 9 Results
| 1
Answer:
To use the AUX relay of a Trilogy Networx™ System NETWORXPANEL Wireless Networx Control Panel that is connected to an Air Access system, configure the Shunt Relay option as follows:
...
View Answer
Answer:
Yes. When changing the Air Access Operator password for a customer, inform the customer that the new password is temporary and the system will require it be changed upon its first use.
...
View Answer
Answer:
Factory default Alarm Lock devices such as Networx locks, readers, the NETWORXPANEL, etc., that have been discovered and connected to an Air Access system cannot be reverted to their original factory firmware. The Air Access discovery and...
View Answer
Answer:
No, an access point cannot be used within the Air Access system.
...
View Answer
Answer:
Stock Music provided by ikoliks, from Pond5
(Stock Music: https://www.pond5.com/royalty-free-music/item/89162806-ambient-technology-background-corporate-inspirational-light)
(Pond5: https://www.pond5.com/)
View Answer
Answer:
Before setting up Air Access Bluetooth credentials, the Air Access system MUST have a Bluetooth-enabled device configured to allow a Mobile Credential to be sent after it is created in the Personnel screen.
...
View Answer
Answer:
No, Air Access requires Wiegand readers only. Order any of the compatible readers offered by Alarm Lock, listed below. Do not order Networx DK Panel Packs as the NETPDK and NETDK model keypads are not compatible with the Air Access system. Order the...
View Answer
Answer:
No. The Air Access system requires Air Access system Gateways. The model AA-GATEWAY, AA-GATEWAYPOE or AA-GATEWAY-PW must be used. Note: The Alarm Lock model AL-IM3 is used with DL Windows, Networx and Continental. Refer to the instructions included...
View Answer
40 Results Per Page | Showing 1-9 of 9 Results
| 1
