Results Per Page | Showing 1-32 of 32 Results
| 1
Answer:
When programming wireless devices through the cloud, be sure to select the correct starting character and point number or an error message will appear. To program your wireless devices, proceed as follows:
...
View Answer
Answer:
Reporting code E300 area 00 Z1 A00 is a common FireLink or GEMC control panel Point ID reporting code that some central stations may mistakenly confuse with a Z1 trouble.
...
View Answer
Answer:
Beginning with the 1996 edition of NFPA 72, fire alarm systems that contain more than two strobes in a room or space require synchronization. Since then, all manufactures have produced Horn/Strobes and Strobes that will Synchronize.
...
View Answer
Answer:
How to use the "Primary Status and Controls" tab in the FireLink cloud programming web portal (or the FireLink mobile app) to retrieve the status of the SLC Signaling Line Circuit module (the hardwired interface between the SLC devices and the...
View Answer
Answer:
Programming SLC Device Addresses and Adding Devices into the FireLink Cloud Programming: https://youtu.be/9PJjqwBg53A
View Answer
Answer:
No, however if you wish to program the control panel using the FireLink Cloud Portal (www.FireLinkPro.com), the FireLink control panel must be "new, out of the box" or must be reset back to its original factory default settings and then initially...
View Answer
Answer:
If a supervisory zone goes into trouble, the supervisory icon and keypad sounder will automatically reset when the trouble condition clears.
View Answer
Answer:
This video provides an overview of the steps necessary to program your FireLink fire alarm control panel (FACP) using the FireLink programming website (https://FireLink.NapcoNOC2.com).
...
View Answer
Answer:
In the PCD-Windows Quickloader NAC/Output Assignment screen, NAC A or D must be programmed for Reverse Polarity. If the 24VDC needs to be Resetable, program NAC A or D for both Reverse Polarity and Fire Reset.
View Answer
Answer:
The FireLink FL-32FACP control panel is equipped with two (2) NAC circuits.
...
View Answer
Answer:
To meet UL and NFPA standards (as of May 2020), the default FireLink control panel program currently included in PCD-Windows Quickloader V6.4.5 (in the Keypad Assignments screen, Keypad Features tab) includes the following two options that should be...
View Answer
Answer:
Use PCD-Windows Quickloader software, available for download at the NAPCO Technical Library (https://tech.napcosecurity.com/).
...
View Answer
Answer:
Yes. Up to five (5) model GEMC-NAC7L Supervised NAC Extenders can be added to a FireLink control panel.
View Answer
Answer:
The NAPCO Technical Library Link described in this video:
https://tech.napcosecurity.com/index.php/techlibrary/docdetails/brand_id/1/doc_id/2619
View Answer
Answer:
Yes, the FireLink FACP can be expanded using any combination of zone expansion modules, SLC or wireless.
View Answer
Answer:
1. Download the default file to your desktop.
...
View Answer
Answer:
The FireLink FACP is shipped with a factory default program already set to report to your central station. In general, the additional steps are: Register the radio communicator, connect all field wiring, add resistors to all unused zones and NACs,...
View Answer
Answer:
How to Address a Remote Annunciator after placing the FireLink Control Panel in Configuration Mode:
View Answer
Answer:
Use the Gemini C-Series (GEMC) Standby Calculation Worksheet located in our Technical Library website:
...
View Answer
Answer:
Access the file from the NAPCO Tech Library in this link and download the file to your desktop. Log into PCD-Windows Quickloader as the Master, click File > Import Multiple Accounts..., locate the file on your desktop, select the file and...
View Answer
Answer:
The FireLink control panel has a pre-loaded Easy Default Program intended for sprinkler supervisory or basic conventional fire applications. For applications outside the scope of the default program, the FireLink system may be programmed Over-The-Air...
View Answer
Answer:
Yes, the control panel can support up to 6 remote annunciators.
View Answer
Answer:
The FireLink control panel can support up to 6 remote annunciators, and all must be addressed in consecutive order as numbers 02 through 06. By default, the control panel annunciator is configured and programmed for address 01 and must not be...
View Answer
Answer:
The FireLink FACP comes with a factory default program already programmed to report to your central station. All you need to do is register the radio communicator portion, connect all field wiring, install EOLRs on all unused zones and NAC circuits,...
View Answer
Answer:
Yes, the fire alarm control panel can be expanded using any combination of zone expansion modules, SLC Signaling Line Circuit modules or wireless receivers.
View Answer
40 Results Per Page | Showing 1-32 of 32 Results
| 1
