Gemini Control Panel Firmware Version Requirements for the iRemote-MOD, NL-RCM and NL-MOD

Date Added: 3/21/11

Gemini Control Panel Firmware Version Requirements for the iRemote-MOD, NL-RCM and NL-MOD.

Display iRemote at MyRemoteKeypad.com and VideoAlert.net

Date Added: 8/9/11

How To Display The iREmote-MOD On The Websites MyRemoteKeypad.com and VideoAlert.net

Controlling a Programmable "Set-back" Thermostat via iRemote-Mod

Date Added: 2/13/12

Controlling A Programmable "Set-back" Thermostat via iRemote-Mod

NetLink RCM-PROGCABLE Keypad Bus Programming Cable

Date Added: 8/18/10

NAPCO NetLink RCM-PROGCABLE Programming Cable.

Changing iRemote-MOD Compatibility Number

Date Added: 1/4/12

Changing iRemote-Mod Compatibility Number

IREMOTE-MOD Firmware Files (Triangle 3)

Date Added: 3/26/13

This WinZip file contains the two IREMOTE-MOD Firmware Files (listed below) for those IREMOTE-MOD units with a Triangle number label 3: NAPCO_RCM_107.hex (for the NL-RCM) NLMod33 - 003.000.024.he3 (for the NL-MOD) Use the NL-MODCONFIG software to upgrade the firmware files. Follow the instructions in the enclosed "Firmware Selection ReadMe.doc".

IREMOTE-MOD Firmware Files (Triangle number less than 3)

Date Added: 3/26/13

This WinZip file contains the two IREMOTE-MOD Firmware Files (listed below) for those IREMOTE-MOD units with a Triangle number label that is less than 3: NAPCO_RCM_107.hex (for the NL-RCM) NLMod - 001.006.203.hex (for the NL-MOD) Use the NL-MODCONFIG software to upgrade the firmware files. Follow the instructions in the enclosed "Firmware Selection ReadMe.doc".

NL-MOD Firmware V1.6.203 & NL-RCM Firmware V107

Date Added: 10/10/11

1 WinZip file contains the following firmware upgrade files: NL-MOD Firmware V1.6.203 NL-RCM Firmware V107.

NL-RCM Remote Control Module Installation Instructions

Date Added: 6/1/09

NL-RCM Remote Control Module Installation Instructions.

How Configure Primary Reporting via NetLink and Backup Reporting via StarLink Communicators with No Landline

Date Added: 4/19/13

How use Quickloader to configure Primary Reporting via NetLink and Backup Reporting via StarLink Communicators with no landline.

Models: GEM-P816 and GEM-P1632 Control Panels (version 30M or greater) GEM-P3200, GEM-P9600 and GEM-X255 Control Panels (version 50 or greater) NL-MOD Network Communication Module NL-RCM Remote Control Module SLe-GSM and SL-1FD-T StarLink Communicators