Results Per Page | Showing 1-15 of 15 Results
| 1
Date Added: 3/26/13
This WinZip file contains the two IREMOTE-MOD Firmware Files (listed below) for those IREMOTE-MOD units with a Triangle number label 3: NAPCO_RCM_107.hex (for the NL-RCM) NLMod33 - 003.000.024.he3 (for the NL-MOD) Use the NL-MODCONFIG software to upgrade the firmware files. Follow the instructions in the enclosed "Firmware Selection ReadMe.doc".
Posted in [Software / Firmware]
Tags:
NL-MODCONFIG
NL-MOD
NL-RCM
iRemote-Mod
Date Added: 3/26/13
This WinZip file contains the two IREMOTE-MOD Firmware Files (listed below) for those IREMOTE-MOD units with a Triangle number label that is less than 3: NAPCO_RCM_107.hex (for the NL-RCM) NLMod - 001.006.203.hex (for the NL-MOD) Use the NL-MODCONFIG software to upgrade the firmware files. Follow the instructions in the enclosed "Firmware Selection ReadMe.doc".
Posted in [Software / Firmware]
Tags:
NL-MODCONFIG
NL-MOD
NL-RCM
iRemote-Mod
Date Added: 3/26/13
This WinZip file contains the NL-MOD-UL Firmware File (listed below) for all NL-MOD-UL units:
NLMod - 001.006.203.hex
Use the NL-MODCONFIG software to upgrade the firmware. Follow the instructions "Firmware Selection ReadMe.doc" located within the WinZip file.
Posted in [Software / Firmware]
Tags:
NL-MODCONFIG
NL-MOD-UL
Date Added: 1/15/14
How to Program Napco Gemini Control Panels and NetLink NL-MODs for Remote IP Uploading / Downloading, and How to Configure the NL-MOD for IP Communications and Central Station Monitoring.
Posted in [Application Notes]
Tags:
NL-MODCONFIG
NL-MOD
Date Added: 3/14/18
How to program your alarm control panel and NetLink NL-MOD to report full Contact ID via TCP IP Communications.
PCD-Windows Quickloader and NL-MODCONFIG software v3.0.3.0 or greater is required.
Posted in [Video Tech Tips]
Tags:
NL-MOD
PCD-Windows
Quickloader
NL-MODCONFIG
Date Added: 1/29/19
Netlink NL-MODCONFIG Software Version V3.0.5.11.
With the NL-MODCONFIG version 3.0.0 or later software, the NL-MODCONFIG database had been updated and therefore a conversion is required to use NL-MOD accounts created by older versions of the NL-MODCONFIG software. View the instructions in the ReadMe file for converting accounts created by NL-MODCONFIG version 2.0.31 or earlier so these accounts can be opened by newer NL-MODCONFIG versions 3.0.0 or later.
Note: Before installing a new version of NL-MODCONFIG, the older version must first be uninstalled.
See our related Tech Tip here.
Posted in [Software / Firmware]
Tags:
NL-MODCONFIG
Date Added: 10/20/20
Download one WinZip file containing instructions and files for updating:
--GEM-X255, GEM-P9600 and GEM-P3200 control panel firmware;
--The NAPCO Control4 driver that functions with the NAPCO GEM-X255, GEM-P9600 and GEM-P3200 control panels and the NAPCO GEM-P816, GEM-P1632 and GEM-P1664 control panels with an IBR-ZREMOTE installed;
--The IBR-ZREMOTE firmware (both for the new IBR-ZREMOTE with a single Ethernet socket and for the legacy IBR-ZREMOTE with two Ethernet sockets);
--The NL-MODCONFIG software program.
Posted in [Software / Firmware]
Tags:
NL-MODCONFIG
IBR-ZREMOTE
GEM-P1664
GEM-P1632
GEM-P816
Control4
GEM-P3200
GEM-P9600
GEM-X255
Date Added: 4/19/11
NAPCO NetLink NL-MODCONFIG Download Software Utility V3.0.1.27 New Features.
Posted in [Miscellaneous]
Tags:
NL-MODCONFIG
Date Added: 5/12/23
This documentation package (WI2606LF) contains the following documents:
- Install Instructions NL-MOD (WI1242)
- How to Load NL-MOD Factory Defaults (WI2250)
- NL-MODCONFIG Programming Instructions (WI1243)
- iREMOTE-MOD Installation Guide (WI1870)
- iREMOTE-MOD/12 Addendum (WI2062)
- Set Up IP Communication/Up-Download (WI2139)
- ComNet Remote Service Activation (WI2114)
- ComNet Activation Guide (WI2113)
Posted in [Programming Manuals]
Tags:
NL-MODCONFIG
NL-MOD
NetLink
iRemote
Date Added: 8/22/19
How to update the IBR-ZREMOTE, iRemote-MOD, NL-MOD and NL-MOD-UL firmware using the NL-MODCONFIG software.
Posted in [Tech Tips]
Tags:
IBR-ZREMOTE
NL-MODCONFIG