Net.Link NL-MOD Tamper Message (E-341)

Date Added: 10/8/10

How to clear a Net.Link NL-MOD Tamper Message (E-341).

Loading Factory Defaults in the NetLink NL-MOD

Date Added: 6/14/12

If it is desired to "default" the NL-MOD-UL to return the unit to its original "out of box" condition, perform the steps outlined in this document.

NL-MOD Installation Quick Start

Date Added: 2/16/11

NL-MOD Installation Quick Start Procedure for all Gemini Control Panels.

Gemini Control Panel Firmware Version Requirements for the iRemote-MOD, NL-RCM and NL-MOD

Date Added: 3/21/11

Gemini Control Panel Firmware Version Requirements for the iRemote-MOD, NL-RCM and NL-MOD.

NetLink_NL-MODULE Installation Instructions

Date Added: 4/9/09

NAPCO NetLink NL-MOD Network Communication Module Installation Instructions.

NL-MOD to Report to Same NL Receiver via Different IP

Date Added: 10/7/11

Enable NL-MOD To Report To Same Netlink Receiver Via Different IP Address.

SE-NL-MOD Firmware Upgrade Instructions

Date Added: 7/21/06

SE-NL-MOD Firmware Upgrade Instructions.

Using the NetLink NL-MOD with Older Control Panel Firmware Versions

Date Added: 10/8/12

Using the NetLink NL-MOD with Older Control Panel Firmware Versions

Supervising the iRemote-MOD and NL-MOD if disconnected from the Internet

Date Added: 4/30/13

Supervising the iRemote-MOD and NL-MOD if disconnected from the Internet.

IREMOTE-MOD Firmware Files (Triangle 3)

Date Added: 3/26/13

This WinZip file contains the two IREMOTE-MOD Firmware Files (listed below) for those IREMOTE-MOD units with a Triangle number label 3: NAPCO_RCM_107.hex (for the NL-RCM) NLMod33 - 003.000.024.he3 (for the NL-MOD) Use the NL-MODCONFIG software to upgrade the firmware files. Follow the instructions in the enclosed "Firmware Selection ReadMe.doc".

IREMOTE-MOD Firmware Files (Triangle number less than 3)

Date Added: 3/26/13

This WinZip file contains the two IREMOTE-MOD Firmware Files (listed below) for those IREMOTE-MOD units with a Triangle number label that is less than 3: NAPCO_RCM_107.hex (for the NL-RCM) NLMod - 001.006.203.hex (for the NL-MOD) Use the NL-MODCONFIG software to upgrade the firmware files. Follow the instructions in the enclosed "Firmware Selection ReadMe.doc".

How to Program Napco Gemini Control Panels and NetLink NL-MODs for Remote IP Uploading / Downloading, and How to Configure the NL-MOD for IP Communications and Central Station Monitoring

Date Added: 1/15/14

How to Program Napco Gemini Control Panels and NetLink NL-MODs for Remote IP Uploading / Downloading, and How to Configure the NL-MOD for IP Communications and Central Station Monitoring.

NL-MOD Firmware V1.6.203 & NL-RCM Firmware V107

Date Added: 10/10/11

1 WinZip file contains the following firmware upgrade files: NL-MOD Firmware V1.6.203 NL-RCM Firmware V107.

Troubleshooting Guide: NL-MOD not reporting signals to Central Station

Date Added: 6/5/14

Troubleshooting Guide: NL-MOD not reporting signals to Central Station.

What to do if you are unable to see your iBridge IBR-ZREMOTE, iRemote-MOD or NL-MOD using the NL-MODCONFIG software (v3.0.3.0 or later)

Date Added: 1/15/15

What to do if you are unable to see your iBridge IBR-ZREMOTE, iRemote-MOD or NL-MOD using the NL-MODCONFIG software (v3.0.3.0 or later).

How to supervise the TCP/IP connection between the control panel and an NL-MOD

Date Added: 6/11/15

How to supervise the TCP/IP connection between a GEM-P3200, GEM-P9600 or GEM-X255 control panel and an NL-MOD.

Using TCP/IP Communications for local and remote communications for uploading and downloading through iBridge / iREMOTE-MOD / NL-MOD

Date Added: 6/26/15

Using TCP/IP Communications for local and remote communications for uploading and downloading through iBridge / iREMOTE-MOD / NL-MOD.

How to locally and manually update your IBR-ZREMOTE, iREMOTE-MOD and NL-MOD firmware using the NL-MODCONFIG software

Date Added: 2/7/18

How to locally and manually update your IBR-ZREMOTE, iREMOTE-MOD and NL-MOD firmware using the NL-MODCONFIG software:

How to program your alarm control panel and NetLink NL-MOD to report full Contact ID via TCP IP Communications

Date Added: 3/14/18

How to program your alarm control panel and NetLink NL-MOD to report full Contact ID via TCP IP Communications.

PCD-Windows Quickloader and NL-MODCONFIG software v3.0.3.0 or greater is required.

UL 365: UL Police Station Connected Burglary Alarm Units

Date Added: 3/19/13

UL 365 UL Police Station Connected Burglary Alarm Units.

Models:  BDH, CC5502LCD, CC-K1CA, CC-K2AS, CC-RP3DGTL, CF3000LCD, CF3000LCDe, CF5500LCD, GEM-DK1CA, GEM-DK1CAS, GEM-DK3DGTL, GEM-DK3DGTLS, GEM-DRP1CA, GEM-DRP3DGTL, GEM-EZM4, GEM-EZM8, GEM-K1CA, GEM-K2AS, GEM-K3DGTL, GEM-OUT8, GEM-P3200, GEM-P3200M, GEM-P9600, GEM-P9600M, GEM-RP1CAe2, GEM-RP2ASe2, GEM-RP3DGTL, GEM-RS232, GEM-X255, GEM-X255M, H217, NL-MOD, PCBL, PS3000, RM3008, RP3000LCD, RP3000LCDe, TH1 and TRF15.

UL File APAW.S2576

UL 609: UL Local Burglar Alarm Units (Mercantile Premises)

Date Added: 3/19/13

UL 609 UL Local Burglar Alarm Units (Mercantile Premises).

Models:  GEM-P3200M, GEM-P9600M, GEM-RP1CAe2, GEM-RP2ASe2, H217, BDH, CC5502LCD, CC-K1CA(XXX), CC-K2AS(XXX), CC-RP3DGTL, CF3000LCD, CF3000LCDe, CF5500LCD, GEM-DK1CA(XXX), GEM-DK1CAS(XXX), GEM-DK3DGTL, GEM-DK3DGTLS, GEM-DRP1CA(XXX), GEM-DRP3DGTL, GEM-EZM4, GEM-EZM8, GEM-K1CA(XXX), GEM-K2AS(XXX), GEM-K3DGTL, GEM-OUT8, GEM-P3200, GEM-P9600, GEM-RP3DGTL, GEM-RS232, GEM-X255, GEM-X255M, NL-MOD, PCBL, PS3000, RM3008, RP3000LCD, RP3000LCDe, TH1 and TRF15.

UL File AOTX.S2576, Local Alarm Units.

Documentation Package for NetLink NL-MOD, iREMOTE-MOD and ComNet

Date Added: 5/12/23

This documentation package (WI2606LF) contains the following documents:

• Install Instructions NL-MOD (WI1242)
• How to Load NL-MOD Factory Defaults (WI2250)
• NL-MODCONFIG Programming Instructions (WI1243)
• iREMOTE-MOD Installation Guide (WI1870)    
• iREMOTE-MOD/12 Addendum (WI2062)    
• Set Up IP Communication/Up-Download (WI2139)    
• ComNet Remote Service Activation (WI2114)    
• ComNet Activation Guide (WI2113)    

NetLink NL-MOD Documentation Package

Date Added: 5/16/23

This NetLink NL-MOD documentation package (WI2608LF) contains the following documents:

• NetLink NL-ULBD Install Instructions (WI1256)
• NL-MOD-UL Install Instructions (WI1523)
• NL-MOD Defaults (WI1879)
• NL-MOD Bell Supervisory (WI1975)
• Set Up IP Communication-Up/Download (WI2139)

How Configure Primary Reporting via NetLink and Backup Reporting via StarLink Communicators with No Landline

Date Added: 4/19/13

How use Quickloader to configure Primary Reporting via NetLink and Backup Reporting via StarLink Communicators with no landline.

Models: GEM-P816 and GEM-P1632 Control Panels (version 30M or greater) GEM-P3200, GEM-P9600 and GEM-X255 Control Panels (version 50 or greater) NL-MOD Network Communication Module NL-RCM Remote Control Module SLe-GSM and SL-1FD-T StarLink Communicators