How to Update Firmware in the NL-MODCONFIG Software

Date Added: 3/17/11

How to update firmware in the NL-MODCONFIG software.

IREMOTE-MOD Firmware Files (Triangle 3)

Date Added: 3/26/13

This WinZip file contains the two IREMOTE-MOD Firmware Files (listed below) for those IREMOTE-MOD units with a Triangle number label 3: NAPCO_RCM_107.hex (for the NL-RCM) NLMod33 - 003.000.024.he3 (for the NL-MOD) Use the NL-MODCONFIG software to upgrade the firmware files. Follow the instructions in the enclosed "Firmware Selection ReadMe.doc".

IREMOTE-MOD Firmware Files (Triangle number less than 3)

Date Added: 3/26/13

This WinZip file contains the two IREMOTE-MOD Firmware Files (listed below) for those IREMOTE-MOD units with a Triangle number label that is less than 3: NAPCO_RCM_107.hex (for the NL-RCM) NLMod - 001.006.203.hex (for the NL-MOD) Use the NL-MODCONFIG software to upgrade the firmware files. Follow the instructions in the enclosed "Firmware Selection ReadMe.doc".

NL-MOD-UL Firmware Upgrade File

Date Added: 3/26/13

This WinZip file contains the NL-MOD-UL Firmware File (listed below) for all NL-MOD-UL units:

NLMod - 001.006.203.hex

Use the NL-MODCONFIG software to upgrade the firmware. Follow the instructions "Firmware Selection ReadMe.doc" located within the WinZip file.

How to Program Napco Gemini Control Panels and NetLink NL-MODs for Remote IP Uploading / Downloading, and How to Configure the NL-MOD for IP Communications and Central Station Monitoring

Date Added: 1/15/14

How to Program Napco Gemini Control Panels and NetLink NL-MODs for Remote IP Uploading / Downloading, and How to Configure the NL-MOD for IP Communications and Central Station Monitoring.

What to do if you are unable to see your iBridge IBR-ZREMOTE, iRemote-MOD or NL-MOD using the NL-MODCONFIG software (v3.0.3.0 or later)

Date Added: 1/15/15

What to do if you are unable to see your iBridge IBR-ZREMOTE, iRemote-MOD or NL-MOD using the NL-MODCONFIG software (v3.0.3.0 or later).

Using the IBR-ZREMOTE with a Verizon FiOS G1100 Router / Gateway

Date Added: 7/9/15

Using the IBR-ZREMOTE with a Verizon FiOS G1100 Router / Gateway.

Unable to connect to the iREMOTE-MOD remotely

Date Added: 2/25/16

Tech Note:  If unable to connect to the iREMOTE-MOD remotely.

How to program your alarm control panel and NetLink NL-MOD to report full Contact ID via TCP IP Communications

Date Added: 3/14/18

How to program your alarm control panel and NetLink NL-MOD to report full Contact ID via TCP IP Communications.

PCD-Windows Quickloader and NL-MODCONFIG software v3.0.3.0 or greater is required.

NL-MODCONFIG Software V3.0.5.11 (LATEST)

Date Added: 1/29/19

Netlink NL-MODCONFIG Software Version V3.0.5.11. 

With the NL-MODCONFIG version 3.0.0 or later software, the NL-MODCONFIG database had been updated and therefore a conversion is required to use NL-MOD accounts created by older versions of the NL-MODCONFIG software.  View the instructions in the ReadMe file for converting accounts created by NL-MODCONFIG version 2.0.31 or earlier so these accounts can be opened by newer NL-MODCONFIG versions 3.0.0 or later.

Note:  Before installing a new version of NL-MODCONFIG, the older version must first be uninstalled.

See our related Tech Tip here.

3rd Party Automation Support- NAPCO IBR-ZREMOTE Software, Firmwares & Driver (LATEST)

Date Added: 10/20/20

Download one WinZip file containing instructions and files for updating:

--GEM-X255, GEM-P9600 and GEM-P3200 control panel firmware;

--The NAPCO Control4 driver that functions with the NAPCO GEM-X255, GEM-P9600 and GEM-P3200 control panels and the NAPCO GEM-P816, GEM-P1632 and GEM-P1664 control panels with an IBR-ZREMOTE installed;

--The IBR-ZREMOTE firmware (both for the new IBR-ZREMOTE with a single Ethernet socket and for the legacy IBR-ZREMOTE with two Ethernet sockets);

--The NL-MODCONFIG software program.

NetLink NL-MODCONFIG Download Software Utility Programming Instructions

Date Added: 8/18/10

NAPCO NetLink NL-MODCONFIG Download Software Utility Programming Instructions.

NetLink NL-MODCONFIG Download Software New V3.0.1.27 Features

Date Added: 4/19/11

NAPCO NetLink NL-MODCONFIG Download Software Utility V3.0.1.27 New Features.

Documentation Package for NetLink NL-MOD, iREMOTE-MOD and ComNet

Date Added: 5/12/23

This documentation package (WI2606LF) contains the following documents:

• Install Instructions NL-MOD (WI1242)
• How to Load NL-MOD Factory Defaults (WI2250)
• NL-MODCONFIG Programming Instructions (WI1243)
• iREMOTE-MOD Installation Guide (WI1870)    
• iREMOTE-MOD/12 Addendum (WI2062)    
• Set Up IP Communication/Up-Download (WI2139)    
• ComNet Remote Service Activation (WI2114)    
• ComNet Activation Guide (WI2113)    

Updating the IBR-ZREMOTE, iRemote-MOD, NL-MOD and NL-MOD-UL firmware using the NL-MODCONFIG software

Date Added: 8/22/19

How to update the IBR-ZREMOTE, iRemote-MOD, NL-MOD and NL-MOD-UL firmware using the NL-MODCONFIG software.