Procedure for integrating a PL Series Lock into CA4K, MVP Access, Air Access or Legacy CA3000

Date Added: 11/26/24

Procedure for integrating a PL6200, PL6600, PL8200, PL8600 into CA4K, MVP Access, Air Access or Legacy CA3000 system.

Integrating a PDL/DL and ET Networx Locks into CA4K, MVP Access, Air Access or Legacy CA3000 Systems

Date Added: 11/26/24

Procedure for integrating PDL/DL and ET Networx Locks into CA4K, MVP Access, Air Access or Legacy CA3000 systems.

(VIDEO) Episode 1: Alarm Lock Wireless Locks / Net Panel Integration with Jeramie Kramer and Andy Phelps

Date Added: 10/17/24

(VIDEO) Episode 2: Farpointe Data, Inc, & Napco Access Pro Talk Readers, Cards & Credential Integration

Date Added: 11/14/24

(VIDEO) Getting Started - Adding a Continental Access Controller to MVP Access

Date Added: 12/5/24

MVP Access Getting Started Guide - Alarm Lock Trilogy Networx Wireless Locks & Net Panel

Date Added: 12/31/24

MVP Access™ Alarm Lock Trilogy Networx Wireless Locks & Net Panel Getting Started Guide

This Getting Started Guide is designed specifically for Wireless Locks and Net Panel and will walk you through all the necessary installation steps, from activation to the initial setup of your Wireless Gateway and Trilogy Networx wireless locks/net panel on the MVP Access Portal.

MVP Access Getting Started Guide - Controllers

Date Added: 12/19/24

MVP Access™ Controllers Getting Started Guide

This Getting Started Guide is designed specifically for Controllers and will walk you through all the necessary installation steps, from activation to the initial setup of your Controller on the MVP Access Portal.

How to convert a GEN3 Gateway using uniVerse Finder Utility Software to MVP Access

Date Added: 3/26/25

These steps will assist in converting a GEN3 Gateway for use with MVP Access.  To convert a GEN3 Gateway to MVP Access you must use the uniVerse Finder Utility Software.

To download the latest version of the uniVerse Finder Utilty Software Click Here.  

uniVerse Finder Utility Software V1.5.0.8 (LATEST)

Date Added: 3/26/25

The uniVerse Finder Utility Software is used to find the IP address (s) and configure supported Continental Access Controllers Ethernet adapters and Alarm Lock Wireless GEN3 Gateways on the same local network.  

Click here to download the uniVerse Finder Programming Guide.

Important Firmware Information:

For steps on how to update ethernet firmware using the uniVerse Finder Utility Software Click Here.  

**The Ethernet adapter firmware included with the uniVerse Finder Utility Software is designed to update your Continental Access Controller Ethernet adapters for compatibility with MVP Access Cloud. Once the firmware on the Ethernet adapters are updated, you can easily adjust the jumpers to enable MVP Cloud, as outlined in the MVP Access Getting Started Guide for Controllers.. If you're using CA4K On-Premises Software, firmware updates are optional and are only necessary if you plan to transition to MVP Access.

Whats New!

• Covert Alarm Lock Gen 3 AL-IM3-80211 and AL-IM3-POE gateway firmware to support MVP Access Cloud. (For steps on how to convert a GEN3 gateway to MVP Access using the uniVerse Finder Software Click Here.)
• Firmware is compatible with CA4K On-Premises and MVP Access (See important firmware information above)
• Setup static IP for all non lantronix x-port ethernet adaptor controllers (see supported models below)

Supported Controllers / Ethernet Adaptors / Gateways

CA-1 / CA-2 (Coming Soon)

CICP2100 & CICP2100S

CICP1300 w/ CICP1300NETBD2

CICP2800 w/ CICP2800NETBD2

CICP1800 w/ CICP2800NETBD2

AL-IM3-80211

AL-IM3-POE

Note: The software requires .Net Framework.  If you receive a .Net Framework error, check that .Net 3.5 and 4.x are enabled in Windows Features. Click here for instruction

MVP Access™ Comnet Activation Guide

Date Added: 11/5/24

MVP Access™ Comnet Activation Guide

This Activation Guide is intended for dealers only and will walk you through the complete activation process for your Doors (Readers). It covers all the essential steps on the Napco Comnet Website to ensure a seamless activation on the MVP Access Portal.

MVP-Air Access: Allow Dealer Privileges

Date Added: 3/27/25

MVP-Air Access Tech Tip:  Allow Dealer Privileges.

How to Setup Multi-Factor Authentication (For use with CA4K v1.2.8.x or later)

Date Added: 6/6/25

What outbound ports does MVP Access Use

Date Added: 5/6/25

Using Privacy Locks with Air Access & MVP Access Enterprise Access Control Systems

Date Added: 2/18/25

MVP Platform Comparison Matrix - MVP Access vs. MVP EZ

Date Added: 5/23/25

(VIDEO) Getting Started - Adding Wireless Locks & Net Panels

Date Added: 12/10/24

Import Badges Template Sample

Date Added: 1/13/25

This is a sample template for importing badges into MVP Access. For detailed instructions, please refer to the help file.

Important: The sample template contains two users with Two-Factor PIN enabled. If you are not using Two-Factor PIN, this data can be removed. All users are assigned to Access Groups 1 and 2. If you have only imported users into Access Group 1 (All Access), you may delete Access Group 2 from each user.