Results Per Page | Showing 1-80 of 80 Results | 1

ALA490

Date Added: 4/10/14

Trilogy Networx Specification.

(Sales Brochure ALA490)

Posted in [Sales/Marketing Spec. Sheets]
Tags: Networx Trilogy

DL6100 / PDL6100 Networx Wireless Lock Spec Sheet

Date Added: 9/19/12

DL6100 / PDL6100 Networx Wireless Lock Specification Sheet.

Posted in [Sales/Marketing Spec. Sheets]
Tags: PDL6100 DL6100 Trilogy Networx

Door Contact Sensor and Door Contact Magnet Example Installation Instructions

Date Added: 4/29/14

Door Contact Sensor and Door Contact Magnet Example Installation Instructions.

Posted in [Installation Manuals]
Tags: Networx

How to configure the lock to remain unlocked using a remote maintained closure

Date Added: 12/2/10

How to configure your Alarm Lock device to remain unlocked using a remote maintained closure.

Posted in [Tech Tips]
Tags: Networx DL3000 DL2800 DL2700 T3 Trilogy

How to Move Existing Networx Account Files to a New Computer

Date Added: 8/18/11

How to Move Existing Networx Account Files to a New Computer

Posted in [Tech Tips]
Tags: DL-Windows Networx

NETWORXPANEL Specification Sheet

Date Added: 4/10/14

NETWORXPANEL Specification Sheet.

NET-DKPAK & NET-PDKPAK

(Sales Brochure ALA495)

Posted in [Sales/Marketing Spec. Sheets]
Tags: Networx NETWORXPANEL

PDL7100 Spec Sheet

Date Added: 9/13/12

Networx PDL7100 Specification Sheet.

Posted in [Sales/Marketing Spec. Sheets]
Tags: Networx PDL7100

Trilogy Networx NETDK & NETPDK Installation Instructions

Date Added: 10/7/10

Trilogy Networx NETDK & NETPDK Installation Instructions.

Posted in [Installation Manuals]
Tags: Trilogy Networx NETPDK NETDK

Verify Networx hardware communications before installation

Date Added: 2/4/14

We reccomend verifying Networx hardware communications before installing the system on a large complex commercial network.

Posted in [Tech Tips]
Tags: Networx

When a Networx Gateway Cannot be Discovered

Date Added: 4/17/13

What to do when a Networx Gateway cannot be discovered.

Posted in [Tech Tips]
Tags: Gateway DL-Windows Networx

Updating Networx Lock Features Issue

Date Added: 8/18/10

Updating Networx Lock Features Issue

Posted in [Tech Notes]
Tags: ETDLN ETPDLN DL6500 PDL6500 DL6100 PDL6100 Networx

Wireless Gateway Troubleshooting

Date Added: 6/12/13

Wireless Gateway Troubleshooting (model Networx AL-IM80211 Gateway).

Posted in [Tech Tips]
Tags: Networx AL-IM80211

Lenel OnGuard 7.0 Open Security Platform

Date Added: 6/4/15

Lenel OnGuard 7.0 Open Security Platform.  Prior to upgrading your Lenel OnGuard software, we recommend following the instructions in this Tech Tip.

Posted in [Tech Tips]
Tags: Networx

Networx ET-PDLN (Early) Sargent Model 8800

Date Added: 4/20/11

Networx ET-PDLN (Early) Sargent Model 8800. Contains both Template and Installation Instructions.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

Posted in [Templates]
Tags: Networx ETPDLN

Templates for the ETPDLN Networx Trilogy Panic Exit Device Trim Sargent Models 8800, 12-8800, 8888, 12-8888, WS-8800, & 12-WS 8800

Date Added: 6/4/15

Templates for the ETPDLN Networx Trilogy Panic Exit Device Trim Sargent Models 8800, 12-8800, 8888, 12-8888, WS-8800, & 12-WS 8800 Series Rim Exit Device.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

Posted in [Templates]
Tags: Networx ETPDLN

Networx ET-PDLN Yale Model 7100

Date Added: 6/6/11

Networx ET-PDLN Yale Model 7100. Contains both Template and Installation Instructions.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

Posted in [Templates]
Tags: Networx ETPDLN

AL-IME Networx Gateway Spec Sheet

Date Added: 11/23/09

AL-IME Networx Gateway Specification Sheet.

Posted in [Sales/Marketing Spec. Sheets]
Tags: AL-IMEPOEP AL-IM80211 AL-IME Gateway Networx

AL-IMEPOEP Plenum-Rated Gateway Installation Instructions

Date Added: 1/29/10

Trilogy Networx Locks Plenum-Rated "Power Over Ethernet" AL-IMEPOEP Gateway Installation Instructions

Posted in [Installation Manuals]
Tags: Trilogy Networx AL-IMEPOEP Gateway

Trilogy Networx Interfaces: Ethernet and 802.11B/G Gateway specifications

Date Added: 4/10/14

Trilogy Networx Interfaces: Ethernet and 802.11B/G Gateway specifications.

(Sales Brochure ALA492)

Posted in [Sales/Marketing Spec. Sheets]
Tags: Networx Gateway

What's in the Box? Networx Gateway AL-IM80211

Date Added: 10/4/11

What's in the Box? Networx Gateway AL-IM80211.

Posted in [Tech Tips]
Tags: AL-IM80211 Networx Gateway

Software - DL-Windows V4.1.96 (Full)

Date Added: 10/25/10

Software - DL-Windows V4.1.96 (Full Download)

Note: When upgrading to Version 4.1.03 or later: Backup your database, then uninstall all previous versions of DL Windows. Delete the DL Windows directory, then install the new version. Finally, import the database to the new version. Note: Import utility is found in the DL-Windows folder.

Posted in [Software / Firmware]
Tags: Networx DL-Windows

PDL6100 Programming Instructions (Supports Version 2 Gateways and Expanders)

Date Added: 6/30/17

PDL6100 Programming Instructions.  These instructions support Version 2 Gateways and Expanders.

Posted in [Programming Manuals]
Tags: Networx PDL6100

Trilogy Networx PDL6200 Advanced wireless locks (ALA489D)

Date Added: 7/21/17

ALA489D - Networx Specification Sheet:  Generation 2 Gateways and Expanders.

Posted in [Sales/Marketing Spec. Sheets]
Tags: trilogy networx wireless locks Networx

DL-Windows V5 for Networx User's Guide

Date Added: 9/30/16

DL-WINDOWS for Networx V5 User's Guide.  Wireless Networx operating instructions.

Posted in [User Guides]
Tags: DL-Windows Networx

Section 4: Networx Product - System Overview & Connectivity

Date Added: 12/1/17

For Legacy DL Windows V4.1.96.

Networx System Overview & Connectivity.

Posted in [Video Tech Tips]
Tags: Networx

Networx Narrow Stile Mounting & Installation Instructions

Date Added: 6/5/19

Networx Narrow Stile Mounting & Installation Instructions

The DL1325NW, PDL1325NW, DL1350NW and PDL1350NW are keypad programmable or wirelessly programmable (through DL-Windows software) narrow stile entry trim for Adams Rite® 1850, 1950, 4070, MS1850S, MS1950S, MS1950, MS1850S-050 and MS1950-050 series deadbolts for narrow stile aluminum doors.

Posted in [Installation Manuals]
Tags: Networx DL1325NW PDL1325NW DL1350NW PDL1350NW

Networx Lock Audit Trail Retrieval

Date Added: 4/24/18

Andy Phelps, Alarm Lock National Training Manager, shows how to retrieve an audit trail from a Networx lock in the DL-Windows software.  He also shows how to view the audit trail log later and how to export the audit log and how to print it.

Posted in [Video Tech Tips]
Tags: Networx

Networx Wireless Keypads and NETWORXPANEL 2-Door Access Controller Spec Sheet

Date Added: 3/18/11

Networx Wireless Keypads and NETWORXPANEL 2-Door Access Controller Specification Sheet.

Posted in [Sales/Marketing Spec. Sheets]
Tags: NETPDK NETDK NETWORXPANEL Networx

When Trying to Discover Over 50 Networx Locks

Date Added: 10/7/19

Important information when using a Networx Gateway or Expander to discover over 50 Networx locks. 

For use with the following models:  AL-IM2-80211, AL-IM80211, AL-IME, AL-IME2, AL-IME2-EXP, AL-IME2-EXP-POE, AL-IME2-PIE, AL-IME2-POE, AL-IME2-RPT, AL-IMEGR, AL-IMEPOE, AL-IMEPOEP, AL-IMEPOEPGR and AL-IME-USB.

Posted in [Programming Manuals]
Tags: AL-IME-USB AL-IMEPOEPGR AL-IMEPOEP AL-IMEPOE AL-IMEGR AL-IME2-RPT AL-IME2-POE AL-IME2-PIE AL-IME2-EXP-POE AL-IME2-EXP AL-IME2 AL-IME AL-IM80211 AL-IM2-80211 Networx

Programming a Remote Release to Networx Locks

Date Added: 4/24/18

Andy Phelps, Alarm Lock National Training Manager, shows how to pair a wireless remote transmitter to a Networx lock.  The process is divided into two sections, the first in the DL-Windows software and the second at the lock keypad.

Posted in [Video Tech Tips]
Tags: Networx

Networx ET-PDLN Von Duprin Model 99

Date Added: 6/6/11

Networx ET-PDLN Von Duprin Model 99. Contains both Template and Installation Instructions.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

Posted in [Templates]
Tags: Networx ETPDLN

Networx Firmware - Gateway V3.81

Date Added: 2/23/11

Firmware for Gateway V3.81. For use with AL-IM80211, AL-IMEPOEP, AL-IMEPOE, and AL-IME.

Posted in [Software / Firmware]
Tags: AL-IM Networx Gateway

Networx Firmware - Gateway V3.86

Date Added: 11/16/11

Firmware for Gateway V3.86. For use with AL-IM80211, AL-IMEPOEP, AL-IMEPOE, and AL-IME.

Posted in [Software / Firmware]
Tags: AL-IM Networx Gateway

Networx Firmware - Gateway V3.89

Date Added: 3/5/14

Gateway Firmware for V3.89. For use with Gateway models AL-IM80211, AL-IMEPOEP, AL-IMEPOE and AL-IME.

For DL-Windows 4.1.96 Users:  Upon updating the Gateway firmware to version 3.89, you may encounter an error message stating that the Gateway Status could not be retrieved.  In this situation, simply request another Gateway Status update from the Gateway Configuration Tools menu and manually verify the correct 'updated' firmware version (3.89).

Note:  In rare cases, DL-Windows 4.1.96 may not be able to perform the update successfully.  DL-Windows version 5.1.1 (available here) must then be used in order to successfully download Gateway 3.89 firmware.

Posted in [Software / Firmware]
Tags: Networx DL-Windows

Networx Firmware - Gateway V3.91

Date Added: 8/18/14

Firmware for Gateway V3.91.  Refer to the instructions and information detailed in version 3.89.

Posted in [Software / Firmware]
Tags: DL-Windows Networx

Networx Firmware - Lock ETDLN V62e

Date Added: 3/22/12

File name:  ETDLN_62e.bin

Networx ETDLN Firmware - 62e.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: Networx ETDLN

Networx Firmware - Lock ETDLN V62g

Date Added: 5/22/17

File name:  ETDLN_62g.bin

Networx ETDLN Firmware - 62g.

Supports Version 2 Gateways and Expanders.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

FIRMWARE UPDATE 62g INCLUDES THE FOLLOWING NEW FEATURES:

  • Lock responds to GLOBAL Emergency Lockdown commands
  • Lock responds to LOCAL Emergency Lockdown commands
  • Faster communication "Wake up" time when using version 2 Gateways
  • Manually unlock door using DL-Windows software (v5.5.3)

Support added for the following keypad programming options:

(AL) 8 Exit program mode
(AL) 67 (AL) 43 Enable Sounder on Emergency
(AL) 67 (AL) 45 Activate Local Emergency (by keypad)
(AL) 67 (AL) 46 Activate Global Emergency (by keypad)
(AL) 67 (AL) 47 Activate Local Emergency (by keyfob; requires RR-4BKEYFOB)
(AL) 67 (AL) 48 Activate Global Emergency (by keyfob; requires RR-4BKEYFOB)

Posted in [Software / Firmware]
Tags: ETDLN Networx

Networx Firmware - Lock PDL6100 V55s

Date Added: 8/12/16

This firmware supports "Version 2" Gateways and Expanders!

File name:  PDL6100_55s.bin

Networx PDL6100 Firmware- 55s.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: Networx PDL6100

Networx Firmware - Lock DL6100 V56k

Date Added: 8/12/16

This firmware supports "Version 2" Gateways and Expanders!

File name:  DL6100_56k.bin

Networx DL6100 Firmware - 56k.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: Networx DL6100

Networx Firmware - Lock DL6500 V58e

Date Added: 3/27/12

File name:  DL6500_58e.bin

Networx DL6500 Firmware - 58e.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: Networx DL6500

Networx Firmware - Lock DL6500 V58g

Date Added: 6/1/17

File name:  DL6500_58g.bin

Networx DL6500 Firmware - 58g.

Supports Version 2 Gateways and Expanders and the Emergency Indicator Lightbar on the inside ("protected" side) of the door.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

FIRMWARE UPDATE 58g INCLUDES THE FOLLOWING NEW FEATURES:

  • Supports Lockdown indicator lightbar on Emergency
  • Lock responds to GLOBAL Emergency Lockdown commands
  • Lock responds to LOCAL Emergency Lockdown commands
  • Faster communication "Wake up" time when using version 2 Gateways
  • Manually unlock door using DL-Windows software (v5.5.3)

Support added for the following keypad programming options:

(AL) 8 Exit Program Mode
(AL) 67 (AL) 43 Enable Sounder on Emergency
(AL) 67 (AL) 44 Enable Inside Emergency Indicator
(AL) 67 (AL) 45 Activate Local Emergency (by keypad)
(AL) 67 (AL) 46 Activate Global Emergency (by keypad)
(AL) 67 (AL) 47 Activate Local Emergency (by keyfob; requires RR-4BKEYFOB)
(AL) 67 (AL) 48 Activate Global Emergency (by keyfob; requires RR-4BKEYFOB)

Posted in [Software / Firmware]
Tags: DL6500 Networx

Networx Firmware - Lock ETPDLN V61L

Date Added: 8/4/16

This firmware supports "Version 2" Gateways and Expanders!

File name:  ETPDLN_61L.bin

Networx ETPDLN Firmware - 61L.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: Networx ETPDLN

Networx Firmware - Lock ETPDNRX V70b

Date Added: 1/21/20

This firmware supports "Version 2" Gateways and Expanders!

File name: ETPDNRX_70b.bin

Networx ETPDNRX Firmware - 70b

Important:  After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid User Code or proximity credential (i.e. Proxcard) to ensure access is granted with its valid "access granted" beeps and LED lights. However, if after the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the Lock Profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note: The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows. Be aware that both letters always denote the same version.

FIRMWARE UPDATE 70b INCLUDES THE FOLLOWING NEW FEATURES:

  • Improved Door Monitoring performance
  • Manually unlock door using DL-Windows software (v5.5.3)
  • Support for DL-Windows Holiday Schedule (v5.5.3)
  • Support for DL-Windows "Enable/Disable Reset Lockdown User" (v5.5.3)
  • New keypad programming option: "Prox Enroll Time Bypass" (clears any User Code slot instantly). At the keypad, press (AL) 2 (AL) (number of slot to be cleared, i.e. 2 - 5000) (AL) 0 (Star)

Posted in [Software / Firmware]
Tags: Networx ETPDNRX

Networx Firmware - Lock ETPDNRX V70a

Date Added: 3/27/13

This firmware supports "Version 2" Gateways and Expanders!

File name:  ETPDNRX_70a.bin

Networx ETPDNRX Firmware - 70a.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: Networx

Networx Firmware - Lock PDL6100 V55t

Date Added: 6/14/17

This firmware supports "Version 2" Gateways and Expanders!

File name:  PDL6100_55t.bin

Networx PDL6100 Firmware- 55t.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

FIRMWARE UPDATE 55t INCLUDES THE FOLLOWING NEW FEATURES:

  • Supports Lockdown indicator lightbar on Emergency
  • Lock responds to GLOBAL Emergency Lockdown commands
  • Lock responds to LOCAL Emergency Lockdown commands
  • Faster communication "Wake up" time when using version 2 Gateways
  • Manually unlock door using DL-Windows software (v5.5.3)

Support added for the following keypad programming options:

(AL) 8 Exit Program Mode
(AL) 67 (AL) 43 Enable Sounder on Emergency
(AL) 67 (AL) 44 Enable Inside Emergency Indicator
(AL) 67 (AL) 45 Activate Local Emergency (by keypad)
(AL) 67 (AL) 46 Activate Global Emergency (by keypad)
(AL) 67 (AL) 47 Activate Local Emergency (by keyfob; requires RR-4BKEYFOB)
(AL) 67 (AL) 48 Activate Global Emergency (by keyfob; requires RR-4BKEYFOB)

Posted in [Software / Firmware]
Tags: Networx PDL6100

Networx Firmware - Lock PDL6200 V67k

Date Added: 8/8/16

(Beta version)

This firmware supports "Version 2" Gateways and Expanders!

File name:  PDL6200_67k.bin

Networx PDL6200 Firmware- 67k.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: PDL6200 Networx

Networx Firmware - Lock PDL6500 V57f

Date Added: 2/27/12

File name:  PDL6500_57f.bin

Networx PDL6500 Firmware - 57f.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: Networx PDL6500

Networx Firmware - Lock PDL6500 V57i

Date Added: 4/5/17

Supports Version 2 Gateways and Expanders and the Emergency Indicator Lightbar on the inside ("protected" side) of the door.

Also includes other updated keypad programming features.

File name:  PDL6500_57i.bin

Networx PDL6500 Firmware - 57i.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

FIRMWARE UPDATE 57i INCLUDES THE FOLLOWING NEW FEATURES:

  • Supports Lockdown indicator lightbar on Emergency
  • Lock responds to GLOBAL Emergency Lockdown commands
  • Lock responds to LOCAL Emergency Lockdown commands
  • Faster communication "Wake up" time when using version 2 Gateways
  • Manually unlock door using DL-Windows software (v5.5.3)

Support added for the following keypad programming options:

(AL) 8 Exit Program Mode
(AL) 67 (AL) 43 Enable Sounder on Emergency
(AL) 67 (AL) 44 Enable Inside Emergency Indicator
(AL) 67 (AL) 45 Activate Local Emergency (by keypad)
(AL) 67 (AL) 46 Activate Global Emergency (by keypad)
(AL) 67 (AL) 47 Activate Local Emergency (by keyfob; requires RR-4BKEYFOB)
(AL) 67 (AL) 48 Activate Global Emergency (by keyfob; requires RR-4BKEYFOB)

Posted in [Software / Firmware]
Tags: Networx PDL6500

Networx Firmware - Lock PDL6600 V68d

Date Added: 4/2/13

(This firmware is a beta version for Continental Instruments).

File name:  PDL6600_68d.bin

Networx PDL6600 Firmware- 68d.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: PDL6600 Networx

Networx Firmware - Lock PDL6600 V68j

Date Added: 10/11/17

Supports Version 2 Gateways and Expanders and the Emergency Indicator Lightbar on the inside ("protected" side) of the door.

Also includes other updated keypad programming features.

File name:  PDL6600_68j.bin

Networx PDL6600 Firmware- 68j.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

FIRMWARE UPDATE 68j INCLUDES THE FOLLOWING NEW FEATURES:

  • Supports Lockdown Sounder on Emergency
  • Supports Lockdown Lightbar Indicator on Emergency
  • Lock responds to GLOBAL Emergency Lockdown commands
  • Lock responds to LOCAL Emergency Lockdown commands
  • Faster communication "Wake up" time when using version 2 Gateways
  • Manually unlock door using DL-Windows software (v5.5.3)

Support added for the following keypad programming options:

(AL) 8 Exit Program Mode
(AL) 67 (AL) 43 Enable Sounder on Emergency
(AL) 67 (AL) 44 Enable Inside Emergency Indicator
(AL) 67 (AL) 45 Activate Local Emergency (by keypad)
(AL) 67 (AL) 46 Activate Global Emergency (by keypad)
(AL) 67 (AL) 47 Activate Local Emergency (by keyfob; requires RR-4BKEYFOB)
(AL) 67 (AL) 48 Activate Global Emergency (by keyfob; requires RR-4BKEYFOB)

Posted in [Software / Firmware]
Tags: Networx PDL6600

Networx Firmware - Lock PDL8200 V75w (beta)

Date Added: 9/3/15

(Beta version)

This firmware supports "Version 2" Gateways and Expanders!

File name:  PDL8200_75w.bin

Networx PDL8200 Firmware- 75w.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: PDL8200 Networx

Networx Firmware - Lock PL6100 V59c

Date Added: 4/17/12

File name:  PL6100_59c.bin

Networx PL6100 Firmware- 59c.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: Networx PL6100

Networx Firmware - Lock PL6100 V59d

Date Added: 6/26/17

File name:  PL6100_59d.bin

Networx PL6100 Firmware- 59d.

Important:  After updating the firmware:

A.  You MUST perform a FULL reset of the lock using the "Erase All Programming" procedure described in the PL6100 lock programming instructions.

  1. At the back of the lock, remove the lock housing screw and remove the cover.
  2. Take out battery pack and remove battery power by disconnecting the battery pack plug.
  3. With battery power disconnected, short the two white wires (Remote Input wires) together for 10 seconds to ensure discharge of all capacitors.  After 10 seconds, remove the short.
  4. Plug in the (provided) male shunt connector into the yellow wire female connector.
  5. With shunt connector connected, re-connect the battery pack.  The lock will immediately sound 3 short beeps (if these 3 beeps are not heard, then restart at step 3).
  6. The lock will then sound more slow beeps, 1 beep for every second it takes to clear the memory.
  7. Lock is ready for programming after 2 rapid beeps are heard and 2 green LED flashes are seen.

B.  Next, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date).  Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. 

If following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded.  Rest assured that your Gateway always maintains your lock information.  Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

FIRMWARE UPDATE 59d INCLUDES THE FOLLOWING NEW FEATURES:

  • Supports Lockdown sounder on Emergency
  • Supports Lockdown indicator lightbar on Emergency
  • Lock responds to GLOBAL Emergency Lockdown commands
  • Lock responds to LOCAL Emergency Lockdown commands
  • Faster communication "Wake up" time when using version 2 Gateways
  • Compatible with up to 10 Wireless Remote Release buttons (RR-1BUTTON and RR-4BKEYFOB)
  • Manually unlock door using DL-Windows software (v5.5.3)

Notes:

  • Prox only "PL" models require DL-Windows software to configure most features
  • Prox only "PL" models require the RR-4BKEYFOB to initiate LOCAL Emergency commands

 

Posted in [Software / Firmware]
Tags: Networx PL6100

Networx Firmware - Lock PL6200 V74a

Date Added: 3/13/13

File name:  PL6200_74a.bin

Networx PL6200 Firmware- 74a.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: Networx PL6200

Networx Firmware - Lock PL6500 V60.e

Date Added: 4/16/12

File name:  PL6500_60e.bin

Networx PL6500 Firmware- 60.e.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: Networx PL6500

Networx Firmware - Lock PL6500 V60.f

Date Added: 3/27/18

File name:  PL6500_60f.bin

Networx PL6500 Firmware- 60.f.

Important:  After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

FIRMWARE UPDATE 60f INCLUDES THE FOLLOWING NEW FEATURES:

  • Supports Lockdown Sounder on Emergency
  • Supports Lockdown indicator lightbar on Emergency
  • Lock responds to GLOBAL Emergency Lockdown commands
  • Lock responds to LOCAL Emergency Lockdown commands
  • Faster communication "Wake up" time when using version 2 Gateways
  • Manually unlock door using DL-Windows software (v5.5.3)
  • Compatible with up to 10 Wireless Remote Release Buttons (RR-1BUTTON and RR-4BKEYFOB)

Notes:
Prox only "PL" models require DL-Windows software to configure most features
Prox only "PL" models require the RR-4BKEYFOB to initiate LOCAL Emergency commands

Posted in [Software / Firmware]
Tags: PL6500 Networx

Networx Firmware - Lock PL6600 V73a

Date Added: 3/8/13

File name:  PL6600_73a.bin

Networx PL6600 Firmware- 73a.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: Networx PL6600

Networx Firmware - NETPDK / NETDK V65a

Date Added: 2/22/13

File name:  DKNKeyPad_65a.bin

NETPDK / NETDK Firmware - 65a.

To Install: Unzip the .bin file to your C:\DL-Windows\Firmware directory. Right-click the desired NETWORXPANEL in the DL-Windows left pane and select Update Lock Firmware. Browse for the new .bin file and click OK. When finished, the confirmation screen shows the NETWORXPANEL version only (NOT the keypad version). To verify the keypad firmware: Within 10 minutes of the previously described update process, press and hold the "1" key on the keypad for 10 seconds and listen for a short beep followed by a long beep. Note: This file will update the firmware that exists within the keypad, not the NETWORXPANEL.

 

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: Networx NETDK NETPDK

Networx Firmware - Lock PDL8600 V79c

Date Added: 8/25/22

File name:  PDL8600_79c.bin

Networx PDL8600 Firmware- 79c.

• Firmware version 79c is a recommended critical update
• Version 79c improves the lock's data processing and data integrity

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Posted in [Software / Firmware]
Tags: PDL8600 Networx

Networx Firmware - Lock ETPDNiRx V79c

Date Added: 9/1/22

This firmware supports "Version 2" Gateways and Expanders!

File name:  ETPDNiRx_79c.bin

Networx ETPDNiRx Firmware - 79c.

Firmware version 79c is a critical update.  This upgrade will improve the unit's data processing and data integrity.

Important:  After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

FIRMWARE UPDATE 79c INCLUDES THE FOLLOWING NEW FEATURES:

  • Supports Lockdown sounder on Emergency
  • Supports Lockdown indicator lightbar on Emergency
  • Lock responds to GLOBAL Emergency Lockdown commands
  • Lock responds to LOCAL Emergency Lockdown commands
  • Faster communication "Wake up" time when using version 2 Gateways
  • Manually unlock door using DL-Windows software (v5.5.3)

Support added for the following keypad programming options:

(AL) 8 Exit Program Mode
(AL) 67 (AL) 43 Enable Sounder on Emergency
(AL) 67 (AL) 44 Enable Inside Emergency Indicator
(AL) 67 (AL) 45 Activate Local Emergency (by keypad)
(AL) 67 (AL) 46 Activate Global Emergency (by keypad)
(AL) 67 (AL) 47 Activate Local Emergency (by keyfob; requires RR-4BKEYFOB)
(AL) 67 (AL) 48 Activate Global Emergency (by keyfob; requires RR-4BKEYFOB)

Posted in [Software / Firmware]
Tags: Networx ETPDNIRX

AL-IM3-80211 Installation Instructions

Date Added: 11/30/22

AL-IM3-80211 "Version 3" Gateway Installation Instructions

Posted in [Installation Manuals]
Tags: AL-IM3-80211 Networx

AL-IM3-POE Gateway Installation Instructions

Date Added: 12/2/22

AL-IM3-POE "Power Over Ethernet" Version 3 Gateway Installation Instructions.

Posted in [Installation Manuals]
Tags: AL-IM3-POE Networx

AL-IM3-80211 "Wireless / Wired" Gateway Installation Instructions

Date Added: 12/20/22

AL-IM3-80211 "Wireless / Wired" Gateway Installation Instructions.

Posted in [Installation Manuals]
Tags: AL-IM3-80211 Networx

AL-IM3-POE "Power Over Ethernet" Gateway Installation Instructions

Date Added: 12/20/22

AL-IM3-POE "Power Over Ethernet" Gateway Installation Instructions.

Posted in [Installation Manuals]
Tags: Networx AL-IM3-POE

Alarm Lock Trilogy Networx Series Lockset Specification (MS Word - Editable)

Date Added: 1/19/23

Alarm Lock Trilogy Networx Series Lockset Specification (MS Word - Editable)

Posted in [CSI / A & E Specifications]
Tags: Networx Trilogy

Alarm Lock Trilogy Networx Series Lockset Specification (PDF)

Date Added: 1/19/23

Alarm Lock Trilogy Networx Series Lockset Specification (PDF)

Posted in [CSI / A & E Specifications]
Tags: Networx Trilogy

Trilogy & Networx: Standalone and Wireless Access Control Locks & Special Application Models

Date Added: 3/15/23

Trilogy & Networx: Standalone and Wireless Access Control Locks & Special Application Models.

K-12 and Campus Security LocDown™ Solutions.

(Brochure ALA112U)

Posted in [Sales/Marketing Spec. Sheets]
Tags: Networx Trilogy

ArchiTech Installation Instructions & Templates: Cylindrical Locks / Surface-Mounted Networx Control Units / Oval Multi-Tech Proximity Reader

Date Added: 3/7/23

Mounting and Installation Instructions and templates for Cylindrical Locks Using Surface-Mounted Networx Control Units and Oval Multi-Tech Proximity Reader.

WinZip file includes installation instructions and templates:

--Metal Door Template: WI2570LF
--Wood Door Template: WI2569LF
--Installation Instructions: WI2573LF

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

Posted in [Installation Manuals]
Tags: Networx ArchiTech

ArchiTech Installation Instructions & Templates: Mortise Locks / Surface-Mounted Networx Control Units / Oval Multi-Tech Proximity Reader

Date Added: 3/7/23

Mounting and Installation Instructions and templates for Mortise Locks Using Surface-Mounted Networx Control Units and Oval Multi-Tech Proximity Reader.

WinZip file includes installation instructions and templates:

--Wood Door Template: WI2571LF
--Metal Door Template: WI2572LF
--Installation Instructions: WI2574LF

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

Posted in [Installation Manuals]
Tags: Networx ArchiTech

ArchiTech Installation Instructions: Cylindrical Anti-Ligature Locks / Mortised Networx Control Module / Concealed Proximity Reader

Date Added: 3/15/23

ArchiTech By Networx:  For Cylindrical Anti-Ligature Locks Using a Mortised Networx Control Module With Concealed Proximity Reader: Mounting and Installation Instructions.

These instructions detail the hardware installation procedure for the ArchiTech cylindrical anti-ligature door locks using the Mortised Networx Control Modules for hollow or solid wood doors (including fiberglass and vinyl; not for metal doors). The Mortised Networx Control Module includes an integral (and thus concealed) Proximity Reader that can read proximity credentials (for example, proximity cards) through the door surface. Installation instructions for the Door Contact Magnet (installed in the door jamb) is also included.

Anti-ligature locks are designed to limit the possibilities of personal harm. Eliminating points where, for example, a rope or bed sheet can be looped or tied to a door fixture to create a point of ligature, the possibility of self-harm or in some severe cases, loss of life, can be averted.

Posted in [Installation Manuals]
Tags: Anti-Ligature Networx ArchiTech

Documentation Package for Alarm Lock Trilogy PDL6100 Series Locks

Date Added: 7/13/23

This documentation package (WI2575ALF) for the Alarm Lock Trilogy Networx PDL6100 Series locks contains the following documents in one PDF file:

• PDL6100 Programming Instructions (WI1790GLF)
• Dielectric Grease Reminder (WI1822A)
• Disable the Flashing Lightbar Instructions (WI2206)
• Inside Housing Removal Instructions (WI1871)
• Lock Firmware Update Instructions (WI2229LF)

This documentation package is part number WI2575ALF.

Posted in [Programming Manuals]
Tags: Networx Trilogy

Resetting Prox-Only Trilogy Locks to Factory Default Settings

Date Added: 8/24/23

Resetting Prox-Only Trilogy Locks to Factory Default Settings.

Posted in [Tech Tips]
Tags: Networx Trilogy

AL-IME2 Gateway Literature Package

Date Added: 12/19/23

This AL-IME2 Gateway Literature Package (WI2680LF) contains the following documents:

(WI2229) Upgrade the Firmware Link
(WI2210) AL-IME2 Installation Instructions
(WI2372) When Trying to Discover Over 50 Locks
(OI427) QR Code Card for DL-Windows Software
(WI2330) Before Installing DL-Windows V5.5.3
(WI1152) DL-Windows Quick Start

Posted in [Installation Manuals]
Tags: Networx AL-IME2

AL-IMEPOE "Power Over Ethernet" Documentation Package

Date Added: 12/29/23

This AL-IMEPOE "Power Over Ethernet" documentation package (WI2685LF) includes the following documents:

(WI2137) -- AL-IMEPOE Installation Instructions
(WI2229LF) -- Firmware Upgrade
(WI2330LF) -- Before Installing DL-Windows V5.5.3
(WI2372LF) -- When Trying to Discover Over 50 Locks

Posted in [Installation Manuals]
Tags: Networx AL-IMEPOE

Documentation Package for ArchiTech Cylindrical Locks with Surface Networx Control Units

Date Added: 2/2/24

This documentation package (WI2720LF) for ArchiTech Cylindrical Locks (using surface-mounted Networx control units) contains the following documents:

(OI385) ArchiTech User Guide
(WI2104) ArchiTech Mounting and Installation Instructions
(WI2229) Firmware Notification

Posted in [Installation Manuals]
Tags: Networx ArchiTech

Documentation Package for ArchiTech Mortise Locks with Surface Networx Control Units with a Keypad/ProxReader

Date Added: 2/2/24

This documentation package (WI2721LF) for ArchiTech Mortise Locks (using surface-mounted Networx control units with a Keypad/ProxReader) contains the following documents:

(OI410) ArchiTech User Guide
(WI2229) Firmware Notification
(WI2313) ArchiTech Installation Instructions
(WI2533) Privacy Addendum

Posted in [Installation Manuals]
Tags: Networx ArchiTech

Documentation Package for ArchiTech Mortise Locks Using Surface-Mounted Networx Control Units

Date Added: 2/5/24

This Documentation Package (WI2722LF) for ArchiTech mortise locks using surface-mounted Networx control units contains the following documents:

(OI385) -- ArchiTech User Guide
(WI2090) -- Installation Instructions
(WI2229) -- Firmware Notification

Posted in [Installation Manuals]
Tags: Networx ArchiTech

ArchiTech by Networx: User's Guide and Programming Instructions for Models E95TF, E95JF and E90TF

Date Added: 5/22/24

ArchiTech by Networx: User's Guide and Programming Instructions for Models E90TF, E95TF and E95JF.

User's Guide and programming instructions for the ArchiTech Series, models:

  • E90TF (Cylindrical lock, Surface-Mounted Networx Control Unit and NAPCO Smart Prox Reader)
  • E95TF (Mortise lock, Surface-Mounted Networx Control Unit and NAPCO Smart Prox Reader)
  • E95JF (Mortise lock, Mortised Networx Control Unit and NAPCO Smart Prox Reader)

Posted in [User Guides]
Tags: ArchiTech E90TF E95JF E95TF Networx

Networx Firmware Update for the ArchiTech Series E90xF Cylindrical Locks

Date Added: 10/9/24

Networx Firmware Update for the ArchiTech Series E90xF Cylindrical Locks. 

While the overall functionality and features remain unchanged, this firmware update (24b) elevates the radio signal transmission strength.

Posted in [Software / Firmware]
Tags: ArchiTech Networx