WI2099A Networx Cylindrical Wood Template

Date Added: 7/15/19

WI2099A - Networx Surface Mounted Networx Control Module for Cylindrical locks

WI2090B Mortise Surface Mt.

Date Added: 9/23/19

Architech Mortise Lock, Surface Mount template

ASA Strike Plate for All Alarm Lock Mortise Locks

Date Added: 3/25/20

ASA Strike Plate for All Alarm Lock Mortise Locks.

This very helpful addendum is for use with all Alarm Lock mortise locksets, including:  T2, T3, Networx and ArchiTech Series.  It is a supplement to the Alarm Lock template #WI1003 USA Mortise door template.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

ArchiTech Firmware - Lock V81q

Date Added: 4/26/17

This firmware supports "Version 2" Gateways and Expanders!

In addition, this firmware supports DL-Windows "Manually Unlock Door" right-click menu option (available in versions greater than 5.4.2).

File name:  N95xAB_v81q.bin

ArchiTech Models N95JA/B, N95TA/B Firmware- 81q.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

ArchiTech Firmware - Lock V81o

Date Added: 4/26/16

This firmware supports "Version 2" Gateways and Expanders!

File name:  N95xAB_81o.bin

ArchiTech Models N95JA/B, N95TA/B Firmware- 81o.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

ArchiTech Firmware - Lock V83o

Date Added: 4/26/17

This firmware supports "Version 2" Gateways and Expanders!

In addition, this firmware supports DL-Windows "Manually Unlock Door" right-click menu option (available in versions greater than 5.4.2).

File name:  N95x12_v83o.bin

ArchiTech Models N95J1/2, N95S1/2 , N95I1/2 , N95T1/2 Firmware- 83o.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

ArchiTech Firmware - Lock V94A

Date Added: 6/5/19

This firmware supports "Version 2" Gateways and Expanders, and includes the most up to date Bluetooth support available.

File name:  N95x12_94a.bin

ArchiTech Models N95J1/2, N95S1/2 , N95I1/2 , N95T1/2 Firmware- 94A.

Note: This upgrade replaces a non-matching firmware number; the new version number "94A" upgrades all previous "83" firmware versions for the various ArchiTech mortise locks.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

ArchiTech Firmware - Lock V83W

Date Added: 5/6/19

This firmware supports "Version 2" Gateways and Expanders, and includes Bluetooth support.

File name:  N95x12_83w.bin

ArchiTech Models N95J1/2, N95S1/2 , N95I1/2 , N95T1/2 Firmware- 83W.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

ArchiTech Firmware - Lock V83L

Date Added: 4/26/16

This firmware supports "Version 2" Gateways and Expanders!

File name:  N95x12_83L.bin

ArchiTech Models N95J1/2, N95S1/2 , N95I1/2 , N95T1/2 Firmware- 83L.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

ArchiTech Firmware - Lock V83P

Date Added: 8/1/17

This firmware supports "Version 2" Gateways and Expanders!

File name:  N95x12_83P.bin

ArchiTech Models N95J1/2, N95S1/2 , N95I1/2 , N95T1/2 Firmware- 83P.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

ArchiTech Firmware - Lock V87D for N90xA/B

Date Added: 7/15/21

Firmware - Lock ArchiTech V87D for N90TA/B and N90SA/B.

File name:  N90xAB_87d.bin

ArchiTech iClass models N90TA/B and N90SA/B 

This firmware supports "Version 2" Gateways and Expanders, and includes the most up to date Bluetooth support available.  In addition, this firmware includes support for the iClass "bit for bit" smart card format (requires DL-Windows v5.5.4 and the AL-PRE2 Proximity Credential Reader Enroller).   

Important:  After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

This file is the ArchiTech code release for model N90xA/B cylindrical format with iClass High Frequency proximity reader.  Supports all previously released ArchiTech series features, as well as the following: Manually Unlock Door, Toggle Mode, Bluetooth iLock App, Virtual Keypad Programming, Bluetooth User Expiration Date, Bluetooth ON / OFF Schedule, Holiday Schedule, and Power Saving Mode Schedule.

ArchiTech Firmware - Lock V87C for N90xA/B

Date Added: 5/23/19

Firmware - Lock ArchiTech V87C for N90TA/B and N90SA/B.

File name:  N90xAB_87c.bin

ArchiTech iClass models N90TA/B and N90SA/B 

This firmware supports "Version 2" Gateways and Expanders, and includes the most up to date Bluetooth support available.

Important:  After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

This file is the ArchiTech code release for model N90xA/B cylindrical format with iClass High Frequency proximity reader.  Supports all previously released ArchiTech series features, as well as the following: Manually Unlock Door, Toggle Mode, Bluetooth iLock App, Virtual Keypad Programming, Bluetooth User Expiration Date, Bluetooth ON / OFF Schedule, Holiday Schedule, and Power Saving Mode Schedule.

ArchiTech Firmware - Lock V87B for N90xA/B

Date Added: 4/11/19

Firmware - Lock ArchiTech V87B for N90TA/B and N90SA/B.

File name:  N90xAB_87b.bin

ArchiTech iClass models N90TA/B and N90SA/B 

Important:  After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

This file is the ArchiTech code release for model N90xA/B cylindrical format with iClass High Frequency proximity reader.  Supports all previously released ArchiTech series features, as well as the following: Manually Unlock Door, Toggle Mode, Bluetooth iLock App, Virtual Keypad Programming, Bluetooth User Expiration Date, Bluetooth ON / OFF Schedule, Holiday Schedule, and Power Saving Mode Schedule.

ArchiTech Firmware - Lock V87A for N90xA/B

Date Added: 8/2/18

Firmware - Lock ArchiTech V87A for N90TA/B and N90SA/B.

File name:  N90xAB_87a.bin

ArchiTech iClass models N90TA/B and N90SA/B 

Important:  After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

This file is the initial ArchiTech code release for model N90xA/B cylindrical format with iClass High Frequency proximity reader.  Supports all previously released ArchiTech series features, as well as the following: Manually Unlock Door, Toggle Mode, Bluetooth iLock App, Virtual Keypad Programming, Bluetooth User Expiration Date, Bluetooth ON / OFF Schedule, Holiday Schedule, and Power Saving Mode Schedule.

ArchiTech Firmware - Lock V90b

Date Added: 8/8/17

File name:  N90x34_90b.bin

ArchiTech Mag Stripe Models N90S4, N90I4, N90J4, N90T4

Firmware- 90b.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

FIRMWARE UPDATE 90b INCLUDES THE FOLLOWING NEW FEATURES:

• Manually unlock door using DL-Windows software (v5.5.3)
• Supports magnetic stripe readers
• Supports the Bluetooth iLock app

ArchiTech Firmware - Lock V85c

Date Added: 2/28/19

File name:  N90x12_85c.bin

ArchiTech Models N90I1/2, N90M1/2, N90S1/2, N90T1/2

Firmware- 85c.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

ArchiTech Firmware - Lock V85b

Date Added: 8/24/18

File name:  N90x12_85b.bin

ArchiTech Models N90I1/2, N90S1/2, N90T1/2

Firmware- 85b.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

FIRMWARE UPDATE 85b INCLUDES THE FOLLOWING NEW FEATURES:

• Supports the new Toggle Mode, available in DL-Windows software v5.5.3 (the Toggle Mode "Manual Relock" function is intended to help avoid accidental lockouts)
• Supports the latest Bluetooth iLock app, including the "Virtual Keypad" function
• Manually unlock door using DL-Windows software (v5.5.3)
• Supports DL-Windows scheduling options: Holiday Schedule / Power Saver Mode / Bluetooth ON/OFF (v5.5.3)
• Supports Emergency Lockout Indicator LED (requires Surface-Mounted Networx Control Unit with a transparent (white) "Program / Passage" button contains a red flashing LED inside the button that is activated during all lockdown conditions)

ArchiTech Firmware - Lock V85a

Date Added: 4/26/16

File name:  N90x12_85a.bin

ArchiTech Models N90I1/2, N90S1/2, N90T1/2

Firmware- 85a.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Additional Privacy Mode Functions

Date Added: 1/17/23

Additional Privacy Mode Functions.

In addition to the features detailed in the User's Guide (OI410), certain ArchiTech privacy models such as N90P/Q7 and N95P/Q7 (v23a) contain additional Privacy Mode functions, as described in this addendum document.

What is Privacy Mode?  Privacy Mode is typically used for rooms needing privacy from others such as bathrooms, dorms and meeting rooms.

Alarm Lock ArchiTech Series Lockset Specification (MS Word - Editable)

Date Added: 1/19/23

Alarm Lock ArchiTech Series Lockset Specification (MS Word - Editable).

Alarm Lock ArchiTech Series Lockset Specification (PDF)

Date Added: 1/19/23

Alarm Lock ArchiTech Series Lockset Specification (PDF)

Mag Stripe Enrolling Instructions

Date Added: 8/17/17

Addendum to the DL-Windows V5 User's Guide:  Mag Stripe Enrolling Instructions.

Note: This addendum is intended to be used with DL-WINDOWS Software (V5.5.2 or later) and the DL-Windows Basic User's Guide (OI382).

ArchiTech by Networx User's Guide

Date Added: 3/7/23

ArchiTech™ by Networx™ User's Guide (OI385).

ArchiTech Ordering Information

Date Added: 3/15/23

Download PDF containing trim options for ArchiTech mortise and cylindrical part number schemes.

Call for Ordering Assistance:
1-800-ALA-LOCK
631-789-4871
Fax: 631-789-3383

Alarm Lock Systems, LLC is a Division of NAPCO Security Technologies, Inc.
345 Bayview Avenue
Amityville, NY 11701 USA

Click here for the full Alarm Lock catalog.

ArchiTech Installation Instructions & Templates: Cylindrical Locks / Proximity Reader / Surface-Mounted Networx Control Unit

Date Added: 4/27/17

ArchiTech Installation Instructions & Templates:  For Cylindrical Locks Using a Proximity Reader and a Surface-Mounted Networx Control Unit.

WinZip file includes installation instructions and templates:

--Installation Instructions (WI2104)
--Template for Surface Mounted Networx Control Unit (WI2099)
--Template for Proximity Reader for Hollow Metal Doors (WI2155)
--Template for Proximity Reader for Solid Wood Doors (WI2098)

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

ArchiTech Installation Instructions & Templates: Mortise Locks / Mag Stripe Reader / Surface-Mounted Networx Control Unit

Date Added: 10/24/17

ArchiTech by Networx:  For Mortise Locks Using a Mag Stripe Reader and a Surface-Mounted Networx Control Unit.

WinZip file includes installation instructions and templates:

--Installation Instructions (WI2234)
--Template for Surface-Mounted Networx Control Units (WI2235)
--Template for Mag Stripe (WI2236ALF)

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

ArchiTech Installation Instructions & Templates: Mortise Locks / Proximity Reader / Surface-Mounted Networx Control Unit

Date Added: 9/19/16

ArchiTech by Networx:  For Mortise Locks Using a Proximity Reader and a Surface-Mounted Networx Control Unit.

WinZip file includes installation instructions and templates:

--Installation Instructions (WI2090)
--Template for Surface-Mounted Networx Control Units (WI2103)
--Template for Proximity Reader for Hollow Metal Doors (WI2154)
--Template for Proximity Reader for Solid Wood Doors (WI2102)

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

ArchiTech Installation Instructions & Templates: Mortise Lock / Surface-Mounted Networx Control Unit / Keypad/ProxReader

Date Added: 8/11/18

Installation instructions and templates for the ArchiTech Series, model N95S7 (mortise lock, Surface-Mounted Networx Control Unit and Keypad/ProxReader).

Zip file includes the following three files:

--Installation Instructions (WI2313LF)
--Template for the Surface-Mounted Networx Control Unit (WI2235)
--Template for the Keypad/ProxReader (WI2312LF)

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

ArchiTech Installation Instructions & Templates: Mortise Locks / Mortised Networx Control Module

Date Added: 3/19/18

ArchiTech by Networx: For Mortise Locks using a Mortised Networx Control Module.

WinZip file includes installation instructions and templates:

--Installation Instructions (WI2087)
--Template for Proximity Reader (WI2089)

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

ArchiTech Installation Instructions & Templates: Mortise Lock / Keypad/ProxReader / Mortised Networx Control Unit

Date Added: 10/12/18

Installation instructions and template for the ArchiTech Series, model N95J7 (mortise lock, Keypad/ProxReader and Mortised Networx Control Unit).

Zip file includes the following two files:

--Installation Instructions (WI2317LF)
--Template for the Keypad/ProxReader (WI2318ALF)

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

ArchiTech Installation Instructions & Templates: Mortise Locks / Mortised Networx Control Module / Concealed Proximity Reader

Date Added: 5/1/19

ArchiTech by Networx: For Mortise Locks using a Mortised Networx Control Module with Concealed Proximity Reader.

WinZip file includes installation instructions and template:

--Installation Instructions (WI2338LF)
--Template for Proximity Reader (WI2339LF)

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

ArchiTech Installation Instructions & Templates: Cylindrical Locks / Surface-Mounted Networx Control Units / Oval Multi-Tech Proximity Reader

Date Added: 3/7/23

Mounting and Installation Instructions and templates for Cylindrical Locks Using Surface-Mounted Networx Control Units and Oval Multi-Tech Proximity Reader.

WinZip file includes installation instructions and templates:

--Metal Door Template: WI2570LF
--Wood Door Template: WI2569LF
--Installation Instructions: WI2573LF

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

ArchiTech Installation Instructions & Templates: Mortise Locks / Surface-Mounted Networx Control Units / Oval Multi-Tech Proximity Reader

Date Added: 3/7/23

Mounting and Installation Instructions and templates for Mortise Locks Using Surface-Mounted Networx Control Units and Oval Multi-Tech Proximity Reader.

WinZip file includes installation instructions and templates:

--Wood Door Template: WI2571LF
--Metal Door Template: WI2572LF
--Installation Instructions: WI2574LF

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

ArchiTech Installation Instructions & Templates: Cylindrical Locks using a Mag Stripe Reader and a Surface-Mounted Networx Control Unit

Date Added: 4/28/17

ArchiTech Installation Instructions & Templates:  For Cylindrical Locks using a Mag Stripe Reader and a Surface-Mounted Networx Control Unit.

WinZip file includes installation instructions and templates:

--Installation Instructions (WI2197)
--Template for Surface Mounted Networx Control Unit (WI2199)
--Template for Mag Stripe Reader (WI2198)

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

ArchiTech Installation Instructions: Cylindrical Anti-Ligature Locks / Mortised Networx Control Module / Concealed Proximity Reader

Date Added: 3/15/23

ArchiTech By Networx:  For Cylindrical Anti-Ligature Locks Using a Mortised Networx Control Module With Concealed Proximity Reader: Mounting and Installation Instructions.

These instructions detail the hardware installation procedure for the ArchiTech cylindrical anti-ligature door locks using the Mortised Networx Control Modules for hollow or solid wood doors (including fiberglass and vinyl; not for metal doors). The Mortised Networx Control Module includes an integral (and thus concealed) Proximity Reader that can read proximity credentials (for example, proximity cards) through the door surface. Installation instructions for the Door Contact Magnet (installed in the door jamb) is also included.

Anti-ligature locks are designed to limit the possibilities of personal harm. Eliminating points where, for example, a rope or bed sheet can be looped or tied to a door fixture to create a point of ligature, the possibility of self-harm or in some severe cases, loss of life, can be averted.

ArchiTech Installation Instructions & Templates: Cylindrical Locks / Surface-Mounted Networx Control Unit / Keypad/ProxReader

Date Added: 9/15/19

ArchiTech by Networx: For Cylindrical Locks using Surface-Mounted Networx Control Units and with a Keypad/ProxReader: Mounting and Installation Instructions (N90S7).

WinZip file includes the following PDF files:

--Installation Instructions (WI2366LF)
--Keypad/ProxReader Template for Metal Doors (WI2371LF)
--Keypad/ProxReader Template for Wood Doors (WI2367LF)
--Surface-Mounted Networx Control Unit Template (WI2370LF)

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

ArchiTech & CAB-LOCK Firmware - R95x12 & CABG1

Date Added: 4/24/23

Firmware update for the R95x12 ArchiTech series lock main micro.

This version 96g update adds support for the following:

--CABG1 Wireless Touch Sense Keypad version 98c with two options for binding keypad and lock.

--Keypad binding option 1: "Accessory Mode" (this option can be implemented with or without DL-Windows).

--Keypad binding option 2: "Software Mode" (this option requires DL-Windows v5.5.4 or later software).

--The following lock models:  R95I1/2, R95J1/2, R95S1/2, R95T1/2

Click here to jump to the firmware update for the proximity reader micro in the CABG1 Wireless Touch Sense Keypad and the ArchiTech model R95x12.  

Documentation Package for ArchiTech Cylindrical Locks with Surface Networx Control Units

Date Added: 2/2/24

This documentation package (WI2720LF) for ArchiTech Cylindrical Locks (using surface-mounted Networx control units) contains the following documents:

(OI385) ArchiTech User Guide
(WI2104) ArchiTech Mounting and Installation Instructions
(WI2229) Firmware Notification

Documentation Package for ArchiTech Mortise Locks with Surface Networx Control Units with a Keypad/ProxReader

Date Added: 2/2/24

This documentation package (WI2721LF) for ArchiTech Mortise Locks (using surface-mounted Networx control units with a Keypad/ProxReader) contains the following documents:

(OI410) ArchiTech User Guide
(WI2229) Firmware Notification
(WI2313) ArchiTech Installation Instructions
(WI2533) Privacy Addendum

Documentation Package for ArchiTech Mortise Locks Using Surface-Mounted Networx Control Units

Date Added: 2/5/24

This Documentation Package (WI2722LF) for ArchiTech mortise locks using surface-mounted Networx control units contains the following documents:

(OI385) -- ArchiTech User Guide
(WI2090) -- Installation Instructions
(WI2229) -- Firmware Notification

Supported Bluetooth Readers and ArchiTech Locks for NAPCO E-Access

Date Added: 2/22/24

Supported Bluetooth Readers and ArchiTech Locks for NAPCO E-Access.

ArchiTech User's Guide

Date Added: 3/7/23

OI385D - ArchiTech by Networx User's Guide

ArchiTech by Networx: User's Guide and Programming Instructions for Models E95TF, E95JF and E90TF

Date Added: 5/22/24

ArchiTech by Networx: User's Guide and Programming Instructions for Models E90TF, E95TF and E95JF.

User's Guide and programming instructions for the ArchiTech Series, models:

• E90TF (Cylindrical lock, Surface-Mounted Networx Control Unit and NAPCO Smart Prox Reader)
• E95TF (Mortise lock, Surface-Mounted Networx Control Unit and NAPCO Smart Prox Reader)
• E95JF (Mortise lock, Mortised Networx Control Unit and NAPCO Smart Prox Reader)

ArchiTech by Networx: User's Guide and Programming Instructions for Models N95S7 and N95J7

Date Added: 12/17/20

User's Guide and programming instructions for the ArchiTech Series, models: 

• N95S7 (Mortise lock, Surface-Mounted Networx Control Unit and Keypad/ProxReader)
• N95J7 (Mortise lock, Mortised Networx Control Unit and Keypad/ProxReader)

ArchiTech Keypad/ProxReader Firmware V91f

Date Added: 6/11/24

Update the firmware in the hardwired ArchiTech Keypad/ProxReader:

1. Unzip the .bin file to your C:\DL-Windows\Firmware directory.
2. Launch DL-Windows.
3. In the DL-Windows left pane, select the lock to which the Keypad/ProxReader is connected. Right-click and select "Update Lock Firmware".
4. Browse for the new .bin file and click OK.

Note: When finished, a confirmation screen will only display the ArchiTech lock firmware version, NOT the Keypad/ProxReader firmware version.

To verify the Keypad/ProxReader firmware version 91f:

Within 10 minutes of performing the firmware update (or within 10 minutes of removing power and re-applying power), press and hold the "1" key on the keypad for 10 seconds and the keypad LED and sounder will produce the following sequence of simultaneous flashes / beeps:

• short - short - long - short

Click here for the ArchiTech by Networx: User's Guide (OI410)

WI2090B ArchiTech Mortise Installation Instructions

Date Added: 7/15/19

ArchiTech by Networx Mortise Locks using surface mounted control unit installation guide

WI2104B ArchiTech Cyl, Surface Mt. Template

Date Added: 9/23/19

WI2104B - ArchiTech Cylindrical, Surface Mount

WI2155 ArchiTech Cyl, Metal Template

Date Added: 7/15/19

WI2155 ArchiTech Mechanical Cylindrical Metal Template

WI2098A ArchiTech Cyl Wood Template

Date Added: 7/15/19

WI2098A Cylindrical with back box Wood Template 

WI2154 ArchiTech Mortise Metal Template

Date Added: 7/15/19

WI2154 Mortise Metal Template

How to Reset an ArchiTech Lock (Without the Keypad)

Date Added: 11/13/18

ArchiTech Default (Reset) Procedure

Networx Firmware Update for the ArchiTech Series E95xF Mortise Locks

Date Added: 10/9/24

Networx Firmware Update for the ArchiTech Series E95xF Mortise Locks.

While the overall functionality and features remain unchanged, this firmware update (24b) elevates the radio signal transmission strength.

Networx Firmware Update for the ArchiTech Series E90xF Cylindrical Locks

Date Added: 10/9/24

Networx Firmware Update for the ArchiTech Series E90xF Cylindrical Locks. 

While the overall functionality and features remain unchanged, this firmware update (24b) elevates the radio signal transmission strength.