ArchiTech Keypad/ProxReader Firmware V91e

Date Added: 8/10/22

Update the firmware in the hardwired ArchiTech Keypad/ProxReader:

1. Unzip the .bin file to your C:\DL-Windows\Firmware directory.
2. Launch DL-Windows.
3. In the DL-Windows left pane, select the lock to which the Keypad/ProxReader is connected. Right-click and select "Update Lock Firmware".
4. Browse for the new .bin file and click OK.

Note: When finished, a confirmation screen will only display the ArchiTech lock firmware version, NOT the Keypad/ProxReader firmware version.

To verify the Keypad/ProxReader firmware version:

Within 10 minutes of performing the firmware update, or within 10 minutes of removing power and re-applying power, press and hold the "1" key on the keypad for 10 seconds, then observe:

• One LED flash with one short beep

Click here for the ArchiTech by Networx: User's Guide (OI410)

ArchiTech Installation Instructions & Templates: Cylindrical Locks / Surface-Mounted Networx Control Unit / Keypad/ProxReader

Date Added: 9/15/19

ArchiTech by Networx: For Cylindrical Locks using Surface-Mounted Networx Control Units and with a Keypad/ProxReader: Mounting and Installation Instructions (N90S7).

WinZip file includes the following PDF files:

--Installation Instructions (WI2366LF)
--Keypad/ProxReader Template for Metal Doors (WI2371LF)
--Keypad/ProxReader Template for Wood Doors (WI2367LF)
--Surface-Mounted Networx Control Unit Template (WI2370LF)

Click for trim options for ArchiTech mortise and cylindrical part number schemes.

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.