Results Per Page | Showing 1-13 of 13 Results
| 1
Date Added: 7/10/14
Securing an unlocked Trilogy lockset with a drained battery pack.
Applies to models DL/PDL3500, DL/PDL4500, DL/PDL6500, ETDL, ETDLN, ETPDL, ETPDLN, ETPLN, ETPDLNRX, ETPLNRX, PDL6600.
Posted in [Tech Tips]
Tags:
PDL6600
ETPDLNRX
ETPLNRX
ETPLN
ETPDLN
ETPDL
ETDLN
ETDL
PDL6500
DL6500
PDL4500
DL4500
PDL3500
DL3500
Date Added: 2/22/13
UL Electrically Controlled Single-Point Locks or Latches:
Cylindrical type, Series DL2700, DL2750, DL/PL/PDL2800, DL/PL/PDL3000, DL/PL/PDL3200, DL/PL/PDL4100, DL/PL/PDL5200, DL/PL/PDL5300, and DL/PDL6100 with a 1/2 in. latch bolt. Device is 7.5 VDC, battery operated.
Mortise type, Series DL/PL/PDL3500, includes ClassRoom and DeadBolt Models, Series DL/PL/4500 (DeadBolt Models) and DL/PDL6500 (DeadBolt models) with 3/4 in. latch bolt.
For use with doors rated up to 3 hrs, measuring up to and including 4 ft. wide and 8 ft. high.
Posted in [UL Listings]
Tags:
PDL6500
DL6500
DL4500
PDL3500
DL3500
DL6100
PDL6100
PDL5300
DL5300
DL5200
PDL4100
DL4100
DL3200
PDL3000
PL3000
DL2800
DL3000
DL2750
DL2700
Date Added: 8/1/08
DL6500, PDL6500 Mortise Installation Template (WI1003).
Also see this vervy helpful supplement to the template: ASA Strike Plate for All Alarm Lock Mortise Locks.
IMPORTANT! WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS. ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.
Posted in [Templates]
Tags:
Mortise
PDL6500
DL6500
Date Added: 2/27/12
File name: PDL6500_57f.bin
Networx PDL6500 Firmware - 57f.
Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".
Note: The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows. Be aware that both letters always denote the same version.
Posted in [Software / Firmware]
Tags:
Networx
PDL6500
Date Added: 4/5/17
Supports Version 2 Gateways and Expanders and the Emergency Indicator Lightbar on the inside ("protected" side) of the door.
Also includes other updated keypad programming features.
File name: PDL6500_57i.bin
Networx PDL6500 Firmware - 57i.
Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".
Note: The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows. Be aware that both letters always denote the same version.
FIRMWARE UPDATE 57i INCLUDES THE FOLLOWING NEW FEATURES:
- Supports Lockdown indicator lightbar on Emergency
- Lock responds to GLOBAL Emergency Lockdown commands
- Lock responds to LOCAL Emergency Lockdown commands
- Faster communication "Wake up" time when using version 2 Gateways
- Manually unlock door using DL-Windows software (v5.5.3)
Support added for the following keypad programming options:
(AL) 8 Exit Program Mode
(AL) 67 (AL) 43 Enable Sounder on Emergency
(AL) 67 (AL) 44 Enable Inside Emergency Indicator
(AL) 67 (AL) 45 Activate Local Emergency (by keypad)
(AL) 67 (AL) 46 Activate Global Emergency (by keypad)
(AL) 67 (AL) 47 Activate Local Emergency (by keyfob; requires RR-4BKEYFOB)
(AL) 67 (AL) 48 Activate Global Emergency (by keyfob; requires RR-4BKEYFOB)
Posted in [Software / Firmware]
Tags:
Networx
PDL6500
Date Added: 8/28/19
File name: PDL6500_61m.bin
Networx PDL6500 Firmware - 61m.
Important! This firmware supports the new Emergency RESET LOCKDOWN USER feature. A minimum DL-Windows version of 5.5.3 is required for proper lockdown operation.
Important! After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".
Note: The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows. Be aware that both letters always denote the same version.
FIRMWARE UPDATE 61m INCLUDES THE FOLLOWING NEW FEATURES:
- Manually unlock door using DL-Windows software (v5.5.3)
- Support for DL-Windows Holiday Schedule (v5.5.3)
- Support for DL-Windows "Enable/Disable Reset Lockdown User" (v5.5.3)
- New keypad programming option: "Prox Enroll Time Bypass" (clears any User Code slot instantly). At the keypad, press (AL) 2 (AL) (number of slot to be cleared, i.e. 2 - 5000) (AL) 0 (Star)
Posted in [Software / Firmware]
Tags:
PDL6500
Date Added: 11/8/23
Documentation Package for Wireless Trilogy PDL6500 & Exit Trim ETPDLN. This documentation package (WI2660LF) contains the following documents:
Addendum for Proper Lock Start-Up (WI1133)
Firmware Addendum (WI2229)
PDL65 & ETPDLN Installation Instructions (WI1835)
Emergency Light Bar Addendum (WI2206)
Cylinder Adapter Kits (WI1163)
Cylinder Adapter Kits Addendum (WI1177)
Dielectric Grease Addendum (WI1822)
Posted in [Programming Manuals]
Tags:
ETPDLN
PDL6500
Date Added: 6/5/24
This PDL6500 & ETPDLN Documentation Package (WI2763LF) includes the following documents:
(WI1835) Installation Instructions
(WI1837) Networx Installation
(WI1880) Networx Relay Colors
(WI2122) Mortise DL3500DB Installation Instructions
(WI2123) Mortise DL3500CR Installation Instructions
(WI2206) Emergency Light Bar
(WI2229) Firmware
Posted in [Installation Manuals]
Tags:
PDL6500
ETPDLN
Date Added: 7/1/24
This PDL6500 & ETPDLN Exit Trim Documentation Package (WI2772LF) contains the following documents:
(WI1133) -- Proper Start-Up
(WI1163) -- Cylinder Adapter Kits
(WI1177) -- Cylinder Adapter Kit - Addm
(WI1822) -- Dielectric Grease Notice
(WI1835) -- Programming Instructions
(WI1880) -- Networx Relay Colors
(WI1994) -- Spindle Spacer Lever
(WI2206) -- Emergency Light Bar
(WI2229) -- Firmware Notice
Posted in [Installation Manuals]
Tags:
PDL6500
ETPDLN