Results Per Page | Showing 1-5 of 5 Results
| 1
Date Added: 8/28/14
Follow these steps prior to installing the rim cylinder into the Alarm Lock device. Be sure to use the appropriate cylinder adapter kit with the tailpiece for your brand of cylinder.
Applies to models: ETDL, ETPDL, ETPL, ETDLN, ETPDLN, ETPLN, ET-BIC, ET-CIC, ET-MIC, ET-ARIC, ET-RIC, ET-SIC, ET-YIC.
Posted in [Tech Notes]
Tags:
ET-YIC
ET-SIC
ET-RIC
ET-ARIC
ET-MIC
ET-CIC
ET-BIC
ETPLN
ETPDLN
ETDLN
ETPL
ETPDL
ETDL
Trilogy
Date Added: 7/10/14
Securing an unlocked Trilogy lockset with a drained battery pack.
Applies to models DL/PDL3500, DL/PDL4500, DL/PDL6500, ETDL, ETDLN, ETPDL, ETPDLN, ETPLN, ETPDLNRX, ETPLNRX, PDL6600.
Posted in [Tech Tips]
Tags:
PDL6600
ETPDLNRX
ETPLNRX
ETPLN
ETPDLN
ETPDL
ETDLN
ETDL
PDL6500
DL6500
PDL4500
DL4500
PDL3500
DL3500
Date Added: 4/17/12
File name: ETPLN_63c.bin
Networx ETPLN Firmware - 63.c.
Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".
Note: The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows. Be aware that both letters always denote the same version.
Posted in [Software / Firmware]
Tags:
ETPLN
Date Added: 1/11/18
File name: ETPLN_63d.bin
Networx ETPLN Firmware - 63.d.
Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".
Note: The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows. Be aware that both letters always denote the same version.
FIRMWARE UPDATE 63.d INCLUDES THE FOLLOWING NEW FEATURES:
- Supports Lockdown Sounder on Emergency
- Supports Lockdown Lightbar Indicator on Emergency
- Lock responds to GLOBAL Emergency Lockdown commands
- Lock responds to LOCAL Emergency Lockdown commands
- Faster communication "Wake up" time when using version 2 Gateways
- Compatible with up to 10 Wireless Remote Release buttons (RR-1BUTTON and RR-4BKEYFOB)
- Manually unlock door using DL-Windows software (v5.5.3)
Notes:
- Prox only "PL" models require DL-Windows software to configure most features
- Prox only "PL" models require the RR-4BKEYFOB to initiate LOCAL Emergency commands
Posted in [Software / Firmware]
Tags:
ETPLN
