Results Per Page | Showing 1-13 of 13 Results
| 1
Date Added: 3/10/09
"Residency/Privacy" Lock 4100 / 4500 Series Marketing Specification Sheet (Version 2). Models DL4100, PDL4100, DL4500, PDL4500.
Posted in [Sales/Marketing Spec. Sheets]
Tags:
Date Added: 1/4/12
If a New Schedule is not Working (For all T3 and Networx Locksets)
Posted in [Tech Tips]
Tags:
Date Added: 8/12/11
Rebuild a Lost Account by Uploading from the Lock
Posted in [Tech Tips]
Tags:
Date Added: 7/10/14
Securing an unlocked Trilogy lockset with a drained battery pack.
Applies to models DL/PDL3500, DL/PDL4500, DL/PDL6500, ETDL, ETDLN, ETPDL, ETPDLN, ETPLN, ETPDLNRX, ETPLNRX, PDL6600.
Posted in [Tech Tips]
Tags:
Date Added: 10/1/07
PDL3000, PDL4100, PDL3500, PDL4500, PDL5300, ETPDL
Posted in [Cheat Sheets]
Tags:
Date Added: 3/10/09
"Residency/Privacy" Lock 4100 / 4500 Series Marketing Specification Sheet (Version 1). Models DL4100, PDL4100, DL4500, PDL4500.
Posted in [Sales/Marketing Spec. Sheets]
Tags:
Date Added: 12/18/14
Door Position Indicator Switch Misalignment for models PDL4100, PDL4500, DL4100, DL4500.
A "deadbolt position monitor", monitors the position of the deadbolt, i.e. either extended or retracted. Its general purpose, when the lock is programmed correctly, is to place the lock into or out of Residency Mode or Privacy Mode.
This Tech Tip is intended to describe its operation, when to recognize the abnormal lock operation that results from its incorrect installation, and how to re-install it correctly.
Posted in [Tech Tips]
Tags:
Date Added: 8/25/08
Template--All USA Mortise Locks.
IMPORTANT! WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS. ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.
Posted in [Templates]
Tags:
Date Added: 12/30/16
Enabling Total User Lockout Mode Using the Lock Key Cylinder.
Models: DL4500 and PDL4500 "Residential / Privacy" Lock Models
Posted in [Tech Tips]
Tags:
Date Added: 11/15/11
DL-Windows Event Log Viewer: "Still Locked - No Override" Event (Tech Tip)
Posted in [Tech Tips]
Tags:
Date Added: 2/22/24
Lock models (P)DL4100 and (P)DL4500 include a programmable "Privacy Mode" feature typically used with rooms needing temporary privacy from others (e.g., bathrooms, dorms, and meeting rooms). After using an access code to enter the protected room, the user presses a button on the inside lock body to disable the keypad and/or proximity reader to prevent another "Basic User" (credentials associated with User Numbers 12 and greater) from entering for a pre-programmed duration. There is a red LED on the exterior / outside lock that blinks to indicate that the room is occupied.
The factory default Privacy Mode timeout duration is 10 minutes. To change the number of minutes, use the keypad key sequences described in this Tech Tip.
Posted in [Tech Tips]
Tags: