Convert a DL or PDL Cylindrical Lockset to a small format (BEST) Interchangeable Core Cylinder

Date Added: 6/6/12

How to convert a DL or PDL Cylindrical Lockset (with a standard lever cylinder) to a small format (BEST Type) Interchangeable Core Cylinder.

DL6100 / PDL6100 Networx Wireless Lock Spec Sheet

Date Added: 9/19/12

DL6100 / PDL6100 Networx Wireless Lock Specification Sheet.

Installation instructions for Yale full format interchangeable core tailpiece (part S6070-Y)

Date Added: 4/19/13

Installation instructions for Yale full format interchangeable core tailpiece (part S6070-Y). Models: DL2700, DL2800, DL3000, PDL3000, DL3200, DL4100, PDL4100, DL6100, PDL6100 when configured for Yale full-format interchangeable core.

Networx 6000 Series Relay Wire Colors

Date Added: 8/18/10

Networx 6000 Series Relay Wire Colors.

PDL6100 & DL6100 Installation Instructions

Date Added: 11/15/12

PDL6100 & DL6100 Installation Instructions.

UL Electrically Controlled Single-Point Locks or Latches

Date Added: 2/22/13

UL Electrically Controlled Single-Point Locks or Latches:

Cylindrical type, Series DL2700, DL2750, DL/PL/PDL2800, DL/PL/PDL3000, DL/PL/PDL3200, DL/PL/PDL4100, DL/PL/PDL5200, DL/PL/PDL5300, and DL/PDL6100 with a 1/2 in. latch bolt. Device is 7.5 VDC, battery operated.

Mortise type, Series DL/PL/PDL3500, includes ClassRoom and DeadBolt Models, Series DL/PL/4500 (DeadBolt Models) and DL/PDL6500 (DeadBolt models) with 3/4 in. latch bolt. 

For use with doors rated up to 3 hrs, measuring up to and including 4 ft. wide and 8 ft. high.

Updating Networx Lock Features Issue

Date Added: 8/18/10

Updating Networx Lock Features Issue

DL6100, PDL6100 Cylindrical Installation Template (WI1676)

Date Added: 3/4/09

DL6100, PDL6100 Cylindrical Installation Template (WI1676).

IMPORTANT!  WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.  ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.

PDL6100 Programming Instructions (Supports Version 2 Gateways and Expanders)

Date Added: 6/30/17

PDL6100 Programming Instructions.  These instructions support Version 2 Gateways and Expanders.

PDL6100 Programming Instructions

Date Added: 5/11/15

PDL6100 Programming Instructions.

Networx Firmware - Lock PDL6100 V55s

Date Added: 8/12/16

This firmware supports "Version 2" Gateways and Expanders!

File name:  PDL6100_55s.bin

Networx PDL6100 Firmware- 55s.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

Networx Firmware - Lock PDL6100 V55t

Date Added: 6/14/17

This firmware supports "Version 2" Gateways and Expanders!

File name:  PDL6100_55t.bin

Networx PDL6100 Firmware- 55t.

Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

FIRMWARE UPDATE 55t INCLUDES THE FOLLOWING NEW FEATURES:

• Supports Lockdown indicator lightbar on Emergency
• Lock responds to GLOBAL Emergency Lockdown commands
• Lock responds to LOCAL Emergency Lockdown commands
• Faster communication "Wake up" time when using version 2 Gateways
• Manually unlock door using DL-Windows software (v5.5.3)

Support added for the following keypad programming options:

(AL) 8 Exit Program Mode
(AL) 67 (AL) 43 Enable Sounder on Emergency
(AL) 67 (AL) 44 Enable Inside Emergency Indicator
(AL) 67 (AL) 45 Activate Local Emergency (by keypad)
(AL) 67 (AL) 46 Activate Global Emergency (by keypad)
(AL) 67 (AL) 47 Activate Local Emergency (by keyfob; requires RR-4BKEYFOB)
(AL) 67 (AL) 48 Activate Global Emergency (by keyfob; requires RR-4BKEYFOB)

Networx Firmware - Lock PDL6100 V61m

Date Added: 8/28/19

This firmware supports "Version 2" Gateways and Expanders!

File name:  PDL6100_61m.bin

Networx PDL6100 Firmware- 61m.

Important!  This firmware supports the new Emergency RESET LOCKDOWN USER feature.  A minimum DL-Windows version of 5.5.3 is required for proper lockdown operation.

Important!  After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".

Note:  The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows.  Be aware that both letters always denote the same version.

FIRMWARE UPDATE 61m INCLUDES THE FOLLOWING NEW FEATURES:

• Manually unlock door using DL-Windows software (v5.5.3)
• Support for DL-Windows Holiday Schedule (v5.5.3)
• Support for DL-Windows "Enable/Disable Reset Lockdown User" (v5.5.3)
• New keypad programming option: "Prox Enroll Time Bypass" (clears any User Code slot instantly). At the keypad, press (AL) 2 (AL) (number of slot to be cleared, i.e. 2 - 5000) (AL) 0 (Star)

DL6100 & PDL6100 Installation and Programming Instructions

Date Added: 11/15/23

This document package (WI2671LF) contains the following documents:

Dielectric Grease Addendum (WI1822A)
Installation Instructions (WI1674C)
How to Remove HSG (WI1871)
Emergency Light Bar (WI2206)
DL-WINDOWS Quick Start (WI1152CLF)
Firmware Upgrade (WI2229LF)
Programming Instructions (WI1820C)