FireLink FACP -- Programming Overview

Date Added: 9/24/18

How to add a Remote Annunciator to the NAPCO FireLink control panel

Date Added: 12/6/18

How to add expansion zones to the FireLink control panel

Date Added: 12/6/18

Basic Operating Instructions for the FireLink-Series Commercial Fire Alarm System

Date Added: 12/6/18

Basic Operating Instructions for the FireLink-Series Commercial Fire Alarm System.

Adding a Remote Annunciator to the FireLink Control Panel

Date Added: 12/6/18

Adding a Remote Annunciator to the FireLink Control Panel.

Enabling FireLink Control Panel for Programming Downloads

Date Added: 12/13/18

Enabling FireLink Control Panel for Programming Downloads.

GEMC / FireLink Control Panel Set Up as Slave Fire Alarm DACT

Date Added: 4/17/19

This example explains how to use the FireLink FACP or Gemini C-Series (GEMC) control panels as a slave Digital Alarm Communicator Transmitter (DACT) connected to a 3rd party fire alarm system. This can be done using a GEMC-32 conventional kit as a standalone fire alarm communicator, using a FireLink FACP, or by adding a GEMC-FK1 Fire keypad, a Fire input module and a second commutation path to a GEMC Burg-only application. Note: The Gemini GEMC control panel must be running firmware V84A or later.

How to Address a Remote Annunciator after placing the FireLink Control Panel in Configuration Mode

Date Added: 6/4/19

How to Address a Remote Annunciator after placing the FireLink Control Panel in Configuration Mode.

How to enable your FireLink FACP for remote downloading through the integral StarLink Communicator

Date Added: 6/11/19

FireLink Wiring Diagram (PDF)

Date Added: 6/12/19

FireLink Wiring Diagram (PDF of Part #LA3560).

FireLink Wiring Diagram (DWG)

Date Added: 7/18/19

FireLink Wiring Diagrams, including the .DWG file (Part #LA3560).

Note:  The WinZip file contains three (3) files; unzip all three files into one folder.  All three files must be in the same folder to display properly.

UL 864: (9th Edition) UL Control Units, System

Date Added: 2/8/19

UL 864 (9th Edition) UL Control Units, System.  UL File S3594 - Models:

FL-128FACP, FL-128FACP-A, FL-128FACP-LTEVS, FL-255FACP, FL-255FACP-A, FL-255FACP-LTEVS, FL-32FACP, FL-32FACP-A, FL-96FACP, FL-96FACP-A, FL-96FACP-LTEVS, GEMC-128, GEMC-255, GEMC-32, GEMC-96

FireLink Installation Instructions (32 Zone)

Date Added: 5/13/20

Integrated Fire Alarm 32 Zone Control Panel & Dual Path Communicator:  FireLink Installation Instructions.

Changes to the FireLink Control Panel Program to meet UL and NFPA Standards

Date Added: 5/14/20

To meet UL and NFPA standards, the default FireLink control panel program currently included in PCD-Windows Quickloader V6.4.5 (in the Keypad Assignments screen, Keypad Features tab) includes the following two options that should be unchecked (disabled):

• Keypad 1 Always Unlocked for User Functions
• All Keypads Unlocked For Silence, Reset and Supp.

PCD-Windows Quickloader Software: Adding a Wireless Receiver and Devices to a GEMC FireLink Control Panel

Date Added: 6/11/20

Basic Operating Instructions for the FireLink-Series Commercial Fire Alarm System

Date Added: 5/12/20

Basic Operating Instructions for the FireLink-Series Commercial Fire Alarm System.  Conforms to UL 864 10th edition.  

FireLink Cloud Programming -- Overview

Date Added: 3/5/21

FireLink Cloud Programming -- Overview.  

Programming FireLink zones using the Cloud Web Portal

Date Added: 3/16/21

How to program zones with your FireLink system using the Cloud Web Portal.

How to Program your FireLink or GEMC Control Panel for Supervisory Alarm Auto Reset

Date Added: 5/26/21

If a supervisory zone goes into trouble, the supervisory icon and keypad sounder will automatically reset when the trouble condition clears.

NAPCO StarLink Communicator Compliance Summary

Date Added: 7/9/21

A summary of all StarLink and FireLink compliance approvals.

For a copy of a compliance certificate, simply click the link for the product of interest and you will be automatically directed to the download site.

Programming the FireLink Combination FACP / Cellular Fire Communicator: Getting Started Guide

Date Added: 1/19/21

Programming the FireLink Combination FACP / Cellular Fire Communicator:  Getting Started Guide.

Click here for a video overview of the steps necessary to program your FireLink fire alarm control panel (FACP) using the FireLink programming website (https://FireLink.NapcoNOC2.com).

Wire and Program a FireLink Panel from the Fire Aux Relay to a Communicator Input

Date Added: 3/21/22

How to wire and program a FireLink control panel from the Fire Aux Relay to a communicator input.

GEMC and FireLink Control Panel Set Up for Elevator Recall Using SLC Detectors and Relays

Date Added: 2/5/15

GEMC and FireLink control panel set up for elevator recall using SLC detectors and relays.

GEMC and FireLink Control Panel Set Up for Elevator Recall Using the GEMC-F8ZCPIM Module and the RM3008 Relay

Date Added: 1/15/15

GEMC / FireLink control panel set up for elevator recall using the GEMC-F8ZCPIM module and the RM3008 relay.

Programming FWC-FSLC-EZM2 Dual Input Monitor Module in Quickloader

Date Added: 10/16/14

Programming FWC-FSLC-EZM2 Dual Input Monitor Module in PCD-Windows Quickloader.

Programming a 6-hour Test Timer using Quickloader

Date Added: 7/21/22

Ever since the NFPA 72 (2013) was instituted, a 6-hour Test Timer may be required to be programmed in your Gemini C-Series (GEMC), Firewolf or FireLink control panel.  See this Tech Tip for programming instructions.

Completing the GEMC FireLink Standby Calculation Worksheet for a Default ("Out-of-the-Box") Configuration

Date Added: 3/16/20

The NAPCO Technical Library Link described in this video:

https://tech.napcosecurity.com/index.php/techlibrary/docdetails/brand_id/1/doc_id/2619

Default FireLink Program / Default Battery Calculations

Date Added: 4/13/20

For the default FireLink program, download the .ql9 file.  Note:  The default PCD-Windows Quickloader password is "123".

For additional information, see the FAQ:  "How do I import the default FireLink program into PCD-Windows Quickloader download software?"

-----------------------------------------------------

For the default battery calculations of the FireLink fire alarm control panel, use the Gemini C-Series (GEMC) Standby Calculation Worksheet located in our Technical Library website:

http://tech.napcosecurity.com/index.php/techlibrary/docdetails/brand_id/1/doc_id/1110

Select tab 3 GEMC Fire Only.

The "Out of the Box" factory default values are:

• One (1) GEMC-F8ZCPIM Conventional 8 Fire Zone Expander Plug in Module
• One (1) GEMC-FK1 Fire Keypad
• 71ma draw for Standby and Alarm in the Mother Board AUX PWR, with a QTY of 1 for the integrated StarLink communicator.

The Total Required Standby Battery Capacity for the "Out of the Box" draw is 8.3AH.

Note: Two sets of series 8AH or 7AH batteries are required for every FireLink installation. Other powered devices must be added to the Calculation Worksheet, i.e. smoke detectors, horn/strobes, bells, remote annunciators, etc.

UL 864: (10th Edition) UL Control Units, System

Date Added: 11/22/21

UL 864 (10th Edition) UL Control Units, System.  UL File UOJZ.S3594

Last Updated on 2021-11-22

FireLink Installation Instructions

Date Added: 1/3/23

Integrated Fire Alarm Control Panel & Dual Path Communicator:  FireLink Installation Instructions.

Click here for a Getting Started Guide for Programming the FireLink Combination FACP / Cellular Fire Communicator.

FireLink Control Unit Ground Fault Troubleshooting Instructions

Date Added: 12/30/22

FireLink Control Unit Ground Fault Troubleshooting Instructions.

FireLink Addressable Programming: FWC-FSLCPROGPCB Operating Instructions

Date Added: 12/27/22

FireLink Addressable Programming FWC-FSLCPROGPCB Operating Instructions.

Using PCD-Windows Quickloader to Update GEMC/FireLink Control Panel Firmware

Date Added: 3/2/23

How to update GEMC/FireLink control panel firmware using PCD-Windows Quickloader software:

Using the Fire Aux Relay for 24V Resettable Fire Power

Date Added: 3/22/23

Using the Fire Aux Relay for 24V Resettable Fire Power with the FireLink and Gemini C-Series (GEMC) control panels.

Programming SLC Device Addresses and Adding Devices into the FireLink Cloud Programming

Date Added: 4/14/23

How to program SLC address numbers into devices and enter the SLC devices into the FireLink Cloud programming website.

FireLink Cloud Admin Guide

Date Added: 5/16/23

FireLink Cloud Admin Guide.

A guide to FireLink Cloud administration tools.  The FireLink cloud application allows a fire technician to program specific FireLink unit(s) from their smart phone or tablet.

Programming SLC Relays into FireLink--For use with Elevator Recall

Date Added: 7/6/23

How to program FireLink SLC relays for elevator recall.

Programming SLC Device Addresses and Adding Devices into the FireLink Cloud Programming: https://youtu.be/9PJjqwBg53A

Stock Music provided by septaudio, from Pond5 (Stock Music: https://www.pond5.com/royalty-free-music/item/68051837-corporate-technology) (Pond5: https://www.pond5.com/)

Retrieving the SLC Status in the FireLink Cloud Web Portal or Mobile App

Date Added: 7/21/23

How to use the "Primary Status and Controls" tab in the FireLink cloud programming web portal (or the FireLink mobile app) to retrieve the status of the SLC Signaling Line Circuit module (the hardwired interface between the SLC devices and the FireLink control panel).

Stock Music provided by septaudio, from Pond5

(Stock Music: https://www.pond5.com/royalty-free-music/item/68051837-corporate-technology)

(Pond5: https://www.pond5.com/)

Adding a NAC Extender to a FireLink Control Panel

Date Added: 7/21/23

How to add a GEMC-NAC Supervised NAC Extender to a FireLink control panel.

Stock Music provided by septaudio, from Pond5

(Stock Music:  https://www.pond5.com/royalty-free-music/item/68051837-corporate-technology)

(Pond5:  https://www.pond5.com/)

FireLink Programming Website Overview

Date Added: 8/17/23

Overview of the steps necessary to program your FireLink fire alarm control panel (FACP) using the FireLink programming website (https://FireLink.NapcoNOC2.com).

Stock Music provided by septaudio, from Pond5

(Stock Music:  https://www.pond5.com/royalty-free-music/item/68051837-corporate-technology)

(Pond5:  https://www.pond5.com/)

Syncing NAC Devices on the FireLink Cloud Site

Date Added: 8/24/23

Syncing NAC Devices on the FireLink Cloud Site.

Beginning with the 1996 edition of NFPA 72, fire alarm systems that contain more than two strobes in a room or space require synchronization. Since then, all manufactures have produced Horn/Strobes and Strobes that will Synchronize.

The FireLink / GEMC control panel has a protocol to synchronize System Sensor and Wheelock devices. When using these devices, you must program the system as described in this Tech Tip for the strobes to synchronize.

GEMC-HSKIT1416 Smaller GEMC-FireLink Control Panel Enclosure Dimensions

Date Added: 9/29/23

GEMC-HSKIT1416 Smaller GEMC / FireLink Control Panel Enclosure Dimensions.  WinZip file contains equivalent .PDF and .DWG files.  

GEMC-HSKIT1425 Larger GEMC / FireLink Control Panel Enclosure Dimensions

Date Added: 9/29/23

GEMC-HSKIT1425 Larger GEMC / FireLink Control Panel Enclosure Dimensions.  WinZip file contains equivalent .PDF and .DWG files.

Intertek ETL Certifications for ANSI SIA CP-01

Date Added: 5/7/24

For all Intertek ETL Certifications, visit the Intertek ETL Listed Directory and search for the model name.  This PDF contains certifications for:

Commercial and Residential Fire Alarm and Security Equipment, Fire Alarm Equipment, and Fire Alarm and Security Subassemblies, NAPCO, Model Nos. GEMC-32, GEMC-96, GEMC-128, GEMC-255, GEMC-HSKIT1416, GEMC-HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB,GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, FL-32FACP, FL-96FACP, FL-128FACP, FL-255FACP, FL-32FACP-A, FL-96FACP-A, FL-128FACP-A, FL-255FACP-A, FL-32FACP-LTEVS, FL-96FACP-LTEVS, FL-128FACP-LTVS, FL-255FACP-LTVS, FL-32FACP-LTEVI, FL-96FACP-LTEVI, FL-128FACPLTVI, FL-255FACP-LTVI, FL-32FACP-LTEAS, FL-96FACP-LTEAS, FL-128FACP-LTAS, FL-255FACP-LTAS, FL-32FACP-LTEAI, FL-96FACP-LTEAI, FL-128FACP-LTAI, FL-255FACP-LTAI, GEMC-HSKIT1416, GEMCHSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB, GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR

Remote Keypad for Fire and Burglar Warning Unit, NAPCO, Model Nos. GEM-RP2ASe2 may be followed by up to five characters. GEM-K2AS may be followed by up to five characters. CC-K2AS may be followed by up to five characters.  Remote Keypad for Fire and Burglar Warning Unit, NAPCO, Model Nos.GEM-RP8LCD may be followed by up to five characters.

Resedential Burglary & FIre Receiver and Key Fob, Napco, Model Nos. GEM-RECV32, GEM-RECV96, GEM-RECV255, GEM-RECV-XP8, GEM-KEYF.

A representative sample of the listed devices have been tested, investigated and found to comply with the requirements of the Standard(s) for Control Panel Standard- Features for False Alarm Reduction (ANSI/SIA CP-01) and are identified with the ETL Listed Mark.

Intertek ETL Certifications for UL

Date Added: 5/7/24

For all Intertek ETL Certifications, visit the Intertek ETL Listed Directory and search for the model name.  This PDF contains certifications for UL-268, UL-294, UL-365, UL-609, UL-634, UL-684, UL-985, UL-1023, UL-1076, UL-1610, UL-1635, UL-2075 and UL-2610, as follows:

• GEM-SMK-E, PSMK, GEM-SMK-CO-E, PSMKCO (UL-268)
• E-Access, 1DC, 2DM, 2DMPL, 4DM, 4DMPL, 4DXLPL, 8DXLPL, 1DCPL (UL-294)
• GEM-2D (UL-294)
• GEM-ACM1D, GEM-ACM1DEX, GEMC-32, GEMC-96, GEMC-128, GEMC-255, GEMCHSKIT1416, GEMC-HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB,GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, FL-32FACP, FL-96FACP, FL-128FACP, FL-255FACP, FL-32FACP-A, FL-96FACP-A, FL-128FACP-A, FL-255FACP-A, FL-32FACP-LTEVS, FL-96FACP-LTEVS, FL-128FACP-LTVS, FL-255FACP-LTVS, FL-32FACP-LTEVI, FL-96FACP-LTEVI, FL-128FACP- LTVI, FL-255FACP-LTVI, FL-32FACP-LTEAS, FL-96FACP-LTEAS, FL- 128FACP-LTAS, FL-255FACP-LTAS, FL-32FACP-LTEAI, FL-96FACP-LTEAI, FL-128FACP-LTAI, FL-255FACP-LTAI, GEMC-HSKIT1416, GEMC- HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB, GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM,
• GEMC-24VR (UL-294)
• SLE-ULPS- R, SLE-WiFi-Module, SLE-LTEV-C, SLE-LTEV-CB-C, SLE-LTEV-CBTF-C, SLE-LTEV-Z, SLE- LTEA-C, SLE-LTEA-Z, SLE-LTEA-CBTF-C, SLE-MAXV-CBTF-C, SLE-MAXV-C, SLE-MAXV-Z, SLE-MAXA-CBTFC, SLE-MAXA-C and SLE-MAXA-Z, SLE-MAXV, SLE-MAXA, SLE-MAXV-CB, SLE-MAXV-CB-TF, SLEMAXA-CB, SLE-MAXA-CB-TF, SLE-MAXVR-CB-TF, SLE-MAXAR-CB-TF, SLE-ZWAVE-MOD, EOL2.2K, EOL10K, GEMC-32, GEMC-96, GEMC-128, GEMC-255, GEMCHSKIT1416, GEMC-HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB,GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, FL-32FACP, FL-96FACP, FL-128FACP, FL-255FACP, FL-32FACP-A, FL-96FACP-A, FL-128FACP-A, FL-255FACP-A, FL-32FACP-LTEVS, FL-96FACP-LTEVS, FL-128FACP-LTVS, FL-255FACP-LTVS, FL-32FACP-LTEVI, FL-96FACP-LTEVI, FL-128FACP- LTVI, FL-255FACP-LTVI, FL-32FACP-LTEAS, FL-96FACP-LTEAS, FL- 128FACP-LTAS, FL-255FACP-LTAS, FL-32FACP-LTEAI, FL-96FACP-LTEAI, FL-128FACP-LTAI, FL-255FACP-LTAI, GEMC-HSKIT1416, GEMC- HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB, GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, GEM-P3200, GEM- P3200M, GEM-P9600, GEM-P9600M, GEM-PX255, GEM-X255M (UL-365)
• GEMC-32, GEMC-96, GEMC-128, GEMC-255, GEMCHSKIT1416, GEMC-HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB,GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, FL-32FACP, FL-96FACP, FL-128FACP, FL-255FACP, FL-32FACP-A, FL-96FACP-A, FL-128FACP-A, FL-255FACP-A, FL-32FACP-LTEVS, FL-96FACP-LTEVS, FL-128FACP-LTVS, FL-255FACP-LTVS, FL-32FACP-LTEVI, FL-96FACP-LTEVI, FL-128FACP- LTVI, FL-255FACP-LTVI, FL-32FACP-LTEAS, FL-96FACP-LTEAS, FL- 128FACP-LTAS, FL-255FACP-LTAS, FL-32FACP-LTEAI, FL-96FACP-LTEAI, FL-128FACP-LTAI, FL-255FACP-LTAI, GEMC-HSKIT1416, GEMC- HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB, GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, GEM-P3200, GEM- P3200M, GEM-P9600, GEM-P9600M, GEM-PX255, GEM-X255M (UL-609)
• GEM-RTRANS, GEM- TRANS2, GEM-TRANS2-V2 (UL-634)
• SLE-LTEA, SLE-LTEA-CB, SLE-LTEA-CB-TF, SLE-LTEA-CFB, SLE-LTEA- CFB-PS, SLE-LTEA-FIRE, SLE-LTEA-8D, SLE-LTEV, SLE-LTEV-CB, SLE-LTEV- CB-TF, SLE-LTEV-CFB, SLE-LTEV-CFB-PS, SLE-LTEV-FIRE, SLE-LTEV-8D, SLE-LTEVI-CFB, SLE-LTEVI-CFBPS, SLE-LTEVI-FIRE, SLE-LTEAI-CFB, SLE- LTEAI-CFBPS, SLE-LTEAI-FIRE, SLE-FNI-CFB, SLE-FNI-CFB-PS, SLE-FNI- FIRE, SLE-MAXVI-CFBPS, SLE-MAXVI-CFB, SLE-MAXVI-FIRE, SLE-MAXAI- CFBPS, SLE-MAXAI-CFB, SLE-MAXAI-FIRE,SLE-MAXVR-FIRE, SLE-MAXAR-FIRE, SLE-MAXVIR-CFBP, SLE-MAXVIR-CFB, SLE-MAXVIR-FIRE, SLE-MAXAIR-CFBP, SLE-MAXAIR-CFB, SLE-MAXAIR-FIRE, SLE-MAX2-FIRE, SLE-MAX2-CFB, SLE-MAX2-CFBPS, 9LTE24PSLD, 9SLELTEVIPSLD, 9LTEA24PSLD, 9SLEDPLTEA2PSLD, 9SLELTECMQPSLD, SLE-ULPS-R, SLE-WiFi-Module, SLE-ZWAVE-MOD, EOL2.2K, EOL10K, GEMC-32, GEMC-96, GEMC-128, GEMC-255, GEMCHSKIT1416, GEMC-HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB,GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, FL-32FACP, FL-96FACP, FL-128FACP, FL-255FACP, FL-32FACP-A, FL-96FACP-A, FL-128FACP-A, FL-255FACP-A, FL-32FACP-LTEVS, FL-96FACP-LTEVS, FL-128FACP-LTVS, FL-255FACP-LTVS, FL-32FACP-LTEVI, FL-96FACP-LTEVI, FL-128FACP- LTVI, FL-255FACP-LTVI, FL-32FACP-LTEAS, FL-96FACP-LTEAS, FL- 128FACP-LTAS, FL-255FACP-LTAS, FL-32FACP-LTEAI, FL-96FACP-LTEAI, FL-128FACP-LTAI, FL-255FACP-LTAI, GEMC-HSKIT1416, GEMC-HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB, GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, GEMC-NLMOD2 (UL-864)
• SLE-LTEA, SLE-LTEA-CB, SLE-LTEA-CB-TF, SLE-LTEA-CFB, SLE-LTEA- CFB-PS, SLE-LTEA-FIRE, SLE-LTEA-8D, SLE-LTEV, SLE-LTEV-CB, SLE-LTEV- CB-TF, SLE-LTEV-CFB, SLE-LTEV-CFB-PS, SLE-LTEV-FIRE, SLE-LTEV-8D, SLE-LTEVI-CFB, SLE-LTEVI-CFBPS, SLE-LTEVI-FIRE, SLE-LTEAI-CFB, SLE- LTEAI-CFBPS, SLE-LTEAI-FIRE, SLE-FNI-CFB, SLE-FNI-CFB-PS, SLE-FNI- FIRE, SLE-MAXVI-CFBPS, SLE-MAXVI-CFB, SLE-MAXVI-FIRE, SLE-MAXAI- CFBPS, SLE-MAXAI-CFB, SLE-MAXAI-FIRE,SLE-MAXVR-FIRE, SLE-MAXAR-FIRE, SLE-MAXVIR-CFBP, SLE-MAXVIR-CFB, SLE-MAXVIR-FIRE, SLE-MAXAIR-CFBP, SLE-MAXAIR-CFB, SLE-MAXAIR-FIRE, SLE-MAX2-FIRE, SLE-MAX2-CFB, SLE-MAX2-CFBPS, SLE-ULPS- R, SLE-WiFi-Module, SLE-LTEV-C, SLE-LTEV-CB-C, SLE-LTEV-CBTF-C, SLE-LTEV-Z, SLE-LTEA-C, SLE-LTEA-Z, SLE-LTEA-CBTF-C, SLE-MAXV-CBTF-C, SLE-MAXV-C, SLE-MAXV-Z, SLE-MAXA-CBTFC, SLE-MAXA-C and SLE-MAXA-Z, SLE- MAXV, SLE-MAXA, SLE-MAXV-CB, SLE-MAXV-CB-TF, SLEMAXA-CB, SLE- MAXA-CB-TF, SLE-MAXVR-CB-TF, SLE-MAXAR-CB-TF, SLE-ZWAVE-MOD, EOL2.2K, EOL10K, 9LTE24PSLD, 9SLELTEVIPSLD, 9LTEA24PSLD, 9SLEDPLTEA2PSLD, 9SLELTECMQPSLD, GEMC-32, GEMC-96, GEMC-128, GEMC-255, GEMCHSKIT1416, GEMC-HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB,GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, FL-32FACP, FL-96FACP, FL-128FACP, FL-255FACP, FL-32FACP-A, FL-96FACP-A, FL-128FACP-A, FL-255FACP-A, FL-32FACP-LTEVS, FL-96FACP-LTEVS, FL-128FACP-LTVS, FL-255FACP-LTVS, FL-32FACP-LTEVI, FL-96FACP-LTEVI, FL-128FACP- LTVI, FL-255FACP-LTVI, FL-32FACP-LTEAS, FL-96FACP-LTEAS, FL- 128FACP-LTAS, FL-255FACP-LTAS, FL-32FACP-LTEAI, FL-96FACP-LTEAI, FL-128FACP-LTAI, FL-255FACP-LTAI, GEMC-HSKIT1416, GEMC- HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB, GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, GEM-EZM4/8, GEM-P816, GEM-P1632, GEM-P1664, GEM-P3200, GEM-P3200M, GEM-P9600, GEM-P9600M, GEM-PX255, GEM-X255M, GEMC-NL-MOD2, GEM-RECV32, GEM-RECV96, GEM-RECV255, GEM-RECV-XP8, GEM- KEYF, GEM-RP2ASe2, GEM-K2AS, CC-K2AS, GEM-RP8LCD (UL-985)
• SLE-LTEA, SLE-LTEA-CB, SLE-LTEA-CB-TF, SLE-LTEA-CFB, SLE-LTEA- CFB-PS, SLE-LTEA-FIRE, SLE-LTEA-8D, SLE-LTEV, SLE-LTEV-CB, SLE-LTEV- CB-TF, SLE-LTEV-CFB, SLE-LTEV-CFB-PS, SLE-LTEV-FIRE, SLE-LTEV-8D, SLE-LTEVI-CFB, SLE-LTEVI-CFBPS, SLE-LTEVI-FIRE, SLE-LTEAI-CFB, SLE- LTEAI-CFBPS, SLE-LTEAI-FIRE, SLE-FNI-CFB, SLE-FNI-CFB-PS, SLE-FNI- FIRE, SLE-MAXVI-CFBPS, SLE-MAXVI-CFB, SLE-MAXVI-FIRE, SLE-MAXAI- CFBPS, SLE-MAXAI-CFB, SLE-MAXAI-FIRE,SLE-MAXVR-FIRE, SLE-MAXAR-FIRE, SLE-MAXVIR-CFBP, SLE-MAXVIR-CFB, SLE-MAXVIR-FIRE, SLE-MAXAIR-CFBP, SLE-MAXAIR-CFB, SLE-MAXAIR-FIRE, SLE-MAX2-FIRE, SLE-MAX2-CFB, SLE-MAX2-CFBPS, SLE-ULPS- R, SLE-WiFi-Module, GEMC-32, GEMC-96, GEMC-128, GEMC-255, GEMCHSKIT1416, GEMC-HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB,GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, FL-32FACP, FL-96FACP, FL-128FACP, FL-255FACP, FL-32FACP-A, FL-96FACP-A, FL-128FACP-A, FL-255FACP-A, FL-32FACP-LTEVS, FL-96FACP-LTEVS, FL-128FACP-LTVS, FL-255FACP-LTVS, FL-32FACP-LTEVI, FL-96FACP-LTEVI, FL-128FACP- LTVI, FL-255FACP-LTVI, FL-32FACP-LTEAS, FL-96FACP-LTEAS, FL-128FACP-LTAS, FL-255FACP-LTAS, FL-32FACP-LTEAI, FL-96FACP-LTEAI, FL-128FACP-LTAI, FL-255FACP-LTAI, GEMC-HSKIT1416, GEMC- HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB, GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, GEM-EZM4/8, GEM-P816, GEM-P1632, GEM-P1664, GEM-P3200, GEM-P3200M, GEM-P9600, GEM-P9600M, GEM-PX255, GEM-X255M, GEMC-NL-MOD2, GEM-RP8LCD, GEM-RECV32, GEM-RECV96, GEM-RECV255, GEM-RECV-XP8, GEMKEYF (UL-1023)
• SLE-LTEV-C, SLE-LTEV-CB-C, SLE-LTEV-CBTF-C, SLE-LTEV-Z, SLE- LTEA-C, SLE-LTEA-Z, SLE-LTEA-CBTF-C, SLE-MAXV-CBTF-C, SLE-MAXV-C, SLE-MAXV-Z, SLE-MAXA-CBTFC, SLE-MAXA-C and SLE-MAXA-Z, SLE- MAXV, SLE-MAXA, SLE-MAXV-CB, SLE-MAXV-CB-TF, SLEMAXA-CB, SLE- MAXA-CB-TF, SLE-MAXVR-CB-TF, SLE-MAXAR-CB-TF, SLE-ZWAVE-MOD, EOL2.2K, EOL10K (UL-1076)
• SLE-ULPS- R, SLE-WiFi-Module, SLE-LTEV-C, SLE-LTEV-CB-C, SLE-LTEV-CBTF-C, SLE-LTEV-Z, SLE- LTEA-C, SLE-LTEA-Z, SLE-LTEA-CBTF-C, SLE-MAXV-CBTF-C, SLE-MAXV-C, SLE-MAXV-Z, SLE-MAXA-CBTFC, SLE-MAXA-C and SLE-MAXA-Z, SLE- MAXV, SLE-MAXA, SLE-MAXV-CB, SLE-MAXV-CB-TF, SLEMAXA-CB, SLE-MAXA-CB-TF, SLE-MAXVR-CB-TF, SLE-MAXAR-CB-TF, SLE-ZWAVE-MOD, EOL2.2K, EOL10K. 1, GEMC-32, GEMC-96, GEMC-128, GEMC-255, GEMCHSKIT1416, GEMC-HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB,GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, FL-32FACP, FL-96FACP, FL-128FACP, FL-255FACP, FL-32FACP-A, FL-96FACP-A, FL-128FACP-A, FL-255FACP-A, FL-32FACP-LTEVS, FL-96FACP-LTEVS, FL-128FACP-LTVS, FL-255FACP-LTVS, FL-32FACP-LTEVI, FL-96FACP-LTEVI, FL-128FACP- LTVI, FL-255FACP-LTVI, FL-32FACP-LTEAS, FL-96FACP-LTEAS, FL- 128FACP-LTAS, FL-255FACP-LTAS, FL-32FACP-LTEAI, FL-96FACP-LTEAI, FL-128FACP-LTAI, FL-255FACP-LTAI, GEMC-HSKIT1416, GEMC-HSKIT1425, GEMC-32MB, GEMC-96MB, GEMC-128MB, GEMC-255MB, GEMC-PS24V4A, GEMC-PS24V7A, GEMC-FW-SLC, GEMC-F8ZCPIM, GEMC-24VR, GEM-P3200, GEM-P3200M, GEM-P9600, GEM-P9600M, GEM-PX255, GEM-X255M, GEMC-NL-MOD2, GEM-RP8LCD, GEM-RP2ASe2, GEM-K2AS, CC-K2AS (UL-1610)
• GEM-P3200, GEM-P3200M, GEM-P9600, GEM-P9600M, GEM-PX255, GEM-X255M (UL-1635)
• GEM-SMK-CO-E, PSMKCO (UL-2075)
• SLE-LTEA, SLE-LTEA-CB, SLE-LTEA-CB-TF, SLE-LTEA-CFB, SLE-LTEA- CFB-PS, SLE-LTEA-FIRE, SLE-LTEA-8D, SLE-LTEV, SLE-LTEV-CB, SLE-LTEV- CB-TF, SLE-LTEV-CFB, SLE-LTEV-CFB-PS, SLE-LTEV-FIRE, SLE-LTEV-8D, SLE-LTEVI-CFB, SLE-LTEVI-CFBPS, SLE-LTEVI-FIRE, SLE-LTEAI-CFB, SLE- LTEAI-CFBPS, SLE-LTEAI-FIRE, SLE-FNI-CFB, SLE-FNI-CFB-PS, SLE-FNI- FIRE, SLE-MAXVI-CFBPS, SLE-MAXVI-CFB, SLE-MAXVI-FIRE, SLE-MAXAI- CFBPS, SLE-MAXAI-CFB, SLE-MAXAI-FIRE,SLE-MAXVR-FIRE, SLE-MAXAR-FIRE, SLE-MAXVIR-CFBP, SLE-MAXVIR-CFB, SLE-MAXVIR-FIRE, SLE-MAXAIR-CFBP, SLE-MAXAIR-CFB, SLE-MAXAIR-FIRE, SLE-MAX2-FIRE, SLE-MAX2-CFB, SLE-MAX2-CFBPS (UL-2610)

GEMC / FireLink 24hr Resound & Reporting Codes

Date Added: 7/12/24

Reporting code E300 area 00 Z1 A00 is a common FireLink or GEMC control panel Point ID reporting code that some central stations may mistakenly confuse with a Z1 trouble.

In actuality, E300 area 00 Z1 A00 is a 24-hour Trouble Resound code that will report to the central station every 24 hours (with the keypad beeping and its Trouble icon flashing) until the condition is corrected. A Zone trouble would be an E373 conventional or an 380 SLC point trouble (for example, E373 Z1 A01 is a Z1 trouble).

Control Panel DACTS are required to send detailed information regarding the reported condition (a 'generic' trouble is insufficient). For example, E = Alarm, R = Restore. Be aware that there are more events than possible event codes; some events have a point # that will report as a zone. For example, a Z300 Z1 A00 is a 24 Hour Trouble Resound; an E300 Z00 A00 is a Fire Bus Failure.

See this Tech Tip for a list of reporting codes for the GEMC / FireLink control panels. Note: Burg codes are not applicable for FireLink.

FireLink Wireless Devices via Cloud Programming

Date Added: 9/6/24

Programming FireLink Wireless Devices via Cloud Programming.

When programming wireless devices through the cloud, be sure to select the correct starting character and point number.  For details, see this Tech Tip.

NFPA 72 Sole Path Communicator Approvals (NAPCO StarLink & FireLink)

Date Added: 11/5/24

NFPA 72 Sole Path Communicator Approvals (NAPCO StarLink & FireLink).