Installation Instructions FW4-H and FW2-H

Date Added: 10/5/04

Installation Instructions for FW-4, FW4-H, FW-2 and the FW2-H

Firewolf Control Panel Installation Instructions FW-C2Z, FW-C4Z, FW-C4EZ.

Date Added: 10/23/99

Firewolf Control Panel Installation Instructions FW-C2Z, FW-C4Z, FW-C4EZ.

Firewolf FW-4, FW4-H, FW-2 and the FW2-H Smoke Detector Installation Instructions

Date Added: 11/12/04

Firewolf FW-4, FW4-H, FW-2 and the FW2-H Smoke Detector Installation Instructions

Firewolf FW-2 Smoke Detector Product Advisory

Date Added: 6/11/01

Firewolf FW-2 Smoke Detector Product Advisory

Addendum to the Firewolf FW-4 and FW-2 Installation Instructions (WI972)

Date Added: 10/23/99

Addendum to the "Testing The FW-4 and the FW-2 Installation" section of the FW-4 and FW-2 Installation Instructions (WI972).

Firewolf FW-2S Smoke Detector with integral sounder, FW-2SHEAD and FW-2SBASE Installation Instructions

Date Added: 4/27/10

Firewolf FW-2S Smoke Detector with integral sounder, FW-2SHEAD and FW-2SBASE Installation Instructions

Data Sheet: Conventional Smoke Detection Models FW-2, FW2-H, FW-4, FW4-H

Date Added: 4/1/13

Data Sheet: Conventional Smoke Detection Models FW-2, FW2-H, FW-4, FW4-H (A638).

Data Sheet: Addressable Contact Monitoring Modules FWC-FSLC-EZM1, FWC-FSLC-EZM2

Date Added: 4/1/13

Data Sheet: Addressable Contact Monitoring Modules FWC-FSLC-EZM1, FWC-FSLC-EZM2 (A626).

Data Sheet: Carbon Monoxide Detector 12/24 VDC Model FW-CO12, FW-CO1224

Date Added: 4/1/13

Data Sheet: Carbon Monoxide Detector 12/24 VDC Model FW-CO12, FW-CO1224 (A639).

FWC-FSLC Signaling Line Circuit Modules

Date Added: 12/3/15

This Tech Tip describes the various Fire SLC Signaling Line Circuit modules, their functions and typical applications.

How to generate an AHJ (Authority Having Jurisdiction) Report for FWC-FSLC detectors

Date Added: 3/10/16

How to generate an AHJ (Authority Having Jurisdiction) Report for FWC-FSLC detectors.

Models:  Gemini C-Series (GEMC) / Firewolf

How to program the Test Timer feature (GEMC Control Panels)

Date Added: 3/17/16

How to program the Test Timer feature (GEMC Control Panels).

Enable Cadence for Older Fire Horns

Date Added: 6/24/16

How to enable cadence for older fire horns.

When retrofitting older GEMC / Firewolf control panels, installers may find older horns and/or 4-wire horn strobes installed. Unlike the newer smart devices, these older NAC devices may not include a pre-programmed Temporal 3 cadence. This Tech Tip describes how these older NAC devices can be wired to the control panel in order to have the control panel generate the Temporal 3 cadence.

Coded Alarm by Zone

Date Added: 7/12/16

This Tech Tip details the basic standard programming, configuration and installation requirements of a coded fire alarm system.

Data Sheet: Short Circuit Isolator Module FWC-FSLC-ISO

Date Added: 4/1/13

Data Sheet:  Short Circuit Isolator Module FWC-FSLC-ISO (A628).

Wiring 2-Wire Smoke Detectors to the Napco Firewolf FW-RM1 Reversing Module

Date Added: 2/21/18

Wiring 2-Wire Smoke Detectors to the Napco Firewolf FW-RM1 Reversing Module.

How to program SLC Elevator Recall in your C-Series (GEMC) or Firewolf control panel

Date Added: 3/27/18

Programming a 6-hour Test Timer using Quickloader

Date Added: 7/21/22

Ever since the NFPA 72 (2013) was instituted, a 6-hour Test Timer may be required to be programmed in your Gemini C-Series (GEMC), Firewolf or FireLink control panel.  See this Tech Tip for programming instructions.

FWC-FSLC-RM2-E Dual Relay Module Quick Reference Guide

Date Added: 3/24/23

FWC-FSLC-RM2-E Dual Relay Module Quick Reference Guide (WI2459)

The Dual Relay Module (FWC-FSLC-RM2-E) is to be connected to NAPCO DCP Signaling Line Circuit (SLC). The FWC-FSLC-RM2-E provides two separately controlled sets of Form-C dry relay contacts for general purpose control functions at one address point. Typical applications are where normally open or normally closed contacts are needed. Examples include elevator recall, door closure, turning fans on or off, and auxiliary indications.

FWC-FSLC-SOM1-E Supervised Output Module Quick Reference Guide

Date Added: 3/24/23

FWC-FSLC-SOM1-E Supervised Output Module Quick Reference Guide (WI2460)

The Supervised Output Module (FWC-FSLC-SOM1-E) is to be connected to NAPCO DCP Signaling Line Circuit (SLC). Typical applications are supervised 24VDC to output to audible and visual fire alarm indicating devices such as horns, bells, strobes, etc. Indicating device output provides supervision for open and short circuit conditions. Uses auxiliary power input for device operation and for powering signaling devices.

Data Sheet: Addressable Manual Fire Pull Stations FWC-FSLC-PULL, FWC-FSLC-PULLK, FWC-FSLC-PULL2K, FWC-FSLC-PULL2

Date Added: 3/18/20

Data Sheet: Addressable Manual Fire Pull Stations FWC-FSLC-PULL, FWC-FSLC-PULLK, FWC-FSLC-PULL2K, FWC-FSLC-PULL2 (A629).

Data Sheet: Addressable Photoelectric Smoke Detector FWC-FSLC-SMK

Date Added: 8/16/16

Data Sheet:  Addressable Photoelectric Smoke Detector FWC-FSLC-SMK (A632).