Results Per Page | Showing 1-8 of 8 Results
| 1
Date Added: 11/24/10
How to Maximize "Pass Time" with Narrow Stile Exit Trim with Jackson 1095 Panic Bar. Models: Narrow Stile DL1225ET, DL1250ET, DL/PDL1325ET, DL/PDL1350ET Series Exit Trim. An issue arises when the Pass Time is of an insufficient duration to allow the unlocking and re-locking steps to take place.
Posted in [Tech Tips]
Tags:
Date Added: 5/2/12
Lever and Return Spring Upgrade Kit. Applies to Exit Trim and Mortise Locks only.
Posted in [Installation Manuals]
Tags:
Date Added: 7/18/12
Modified Outside Housing Requires New Lever A design modification to the outside housing requires a shorter outside Lever, as the existing Lever will not fit into the modified outside housing. A new Spindle Spacer must also be used. Note: Refer to these documents for additional information: WI2008 (Lever and Return Spring Upgrade Kit) and WI1994 (Exit Trim & Mortise Locks New Spindle Spacer & Lever).
Posted in [Tech Notes]
Tags:
Date Added: 4/17/13
Outside Housing Design Modification Requires Updated Lever. An internal design upgrade has been implemented that affects the replacement of the outside housing of Alarm Lock mortise and Exit Trim locksets (NOT including narrow stile).
Posted in [Tech Notes]
Tags:
Date Added: 11/6/15
Exit Trim Battery Wire Extension.
If you wish to purchase an Exit Trim battery extension wire, call Customer Service at 800-252-5625 and ask for part number W888, "Exit Trim Wire Extension Assy".
Posted in [Tech Tips]
Tags:
Date Added: 3/3/16
ADDENDUM to Installation Instructions: Circuit Board Plug & Socket Connections for Exit Trim devices.
Posted in [Installation Manuals]
Tags:
Date Added: 2/8/13
ET-PDL Trilogy Panic Exit Device Trim Instructions and Template for Marks Model M9900 Rim Exit Device.
IMPORTANT! WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS. ALWAYS VERIFY DIMENSIONS ON THE TEMPLATE AFTER PRINTING.
Posted in [Installation Manuals]
Tags:
Date Added: 3/5/03
Addendum to the ETDL Cylinder Adapter Kit (WI1163).
Posted in [Tech Tips]
Tags: