Results Per Page | Showing 1-4 of 4 Results
| 1
Date Added: 8/1/16
DL6200, PDL6200 and PDL8200 with Door Monitoring Installation Template.
IMPORTANT! WHEN PRINTING OR PHOTOCOPYING A TEMPLATE, ALWAYS SELECT PRINTING OPTIONS TO ENSURE THAT COPIES ARE PRINTED WITHOUT SIZE ADJUSTMENTS.
AFTER PRINTING, ALWAYS VERIFY THE DIMENSIONS ON THE TEMPLATE.
Posted in [Templates]
Tags:
PDL8200
PDL6200
DL6200
Date Added: 8/9/16
Wireless Trilogy PDL6200 and PDL8200 (with Door Monitoring and 13.56MHz Smart Card support with the PDL8200) Programming Instructions.
Posted in [Programming Manuals]
Tags:
PDL6200
PDL8200
Date Added: 9/3/15
(Beta version)
This firmware supports "Version 2" Gateways and Expanders!
File name: PDL8200_75w.bin
Networx PDL8200 Firmware- 75w.
Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".
Note: The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows. Be aware that both letters always denote the same version.
Posted in [Software / Firmware]
Tags:
PDL8200
Networx
Date Added: 8/17/22
This firmware supports "Version 2" Gateways and Expanders!
File name: PDL8200_79c.bin
Networx PDL8200 Firmware- 79c.
Important: Version 79c is NOT intended for locks that are currently using version 75w.
• Firmware version 79c is a recommended critical update to version 75h
• Version 79c improves the lock's data processing and data integrity
Important: After updating the firmware, you MUST perform a FULL download to the lock (i.e. Users, Features, Schedules and Time/Date). Then use a valid code or card to ensure access is granted with its valid "access granted" beeps and LED lights. However, if following the valid "access granted" indication you then hear 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded. Rest assured that your Gateway always maintains your lock information. Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process".
Note: The firmware version letter type case ("upper case" or "lower case") displayed in the file name may differ and from the case displayed in DL-Windows. Be aware that both letters always denote the same version.
Posted in [Software / Firmware]
Tags:
PDL8200
