SLE-LTEA-CFB, SLE-LTEA-CFB-PS, SLE-LTEA-CB, SLE-LTEA-CB-TF, SLE-LTEA, SLE-LTEA-8D and SLE-LTEA-FIRE firmware version LTEA Sole Path code 176.0.4 / 18.1

Date Added: 1/23/20

WARNING: This firmware file (version LTEA Sole Path code 176.0.4 / 18.1) is only for use with these StarLink models:

(See Installation Instructions WI2226 for these models):
SLE-LTEA-CFB
SLE-LTEA-CFB-PS
SLE-LTEA-CB
SLE-LTEA-CB-TF

(See Installation Instructions WI2227 for these models):
SLE-LTEA
SLE-LTEA-8D
SLE-LTEA-FIRE

----------------------------------------------

IMPORTANT: Do not install unless you first verify the existing firmware version of your radio in the StarLink Radio Management Center at www.napconoc.com: The "Checkins" screen, "Firmware Ver" column must read "176.0.x" (where x is any digit).

(Filename: "SLE-LTEA-TIVA-176_0_4_18_1_01_10_2020.bin").

Note: PCD-Windows Quickloader Software version 6.4.0 or later is required.

See WI2003 for complete step-by-step instructions.

StarLink SLE-LTE-FIRE Series and SLE-LTE-CFB Series Sole Path Fire Communicators NFPA 2013, 2016 & 2019 AHJ Inspection Guide

Date Added: 6/24/20

StarLink SLE-LTE-FIRE Series and SLE-LTE-CFB Series Sole Path Fire Communicators NFPA 2013, 2016 & 2019 AHJ Inspection Guide (includes models SLE-LTEV-FIRE, SLE-LTEV-CFB, SLE-LTEA-FIRE and SLE-LTEA-CFB).

This testing guide is intended to assist with the AHJ inspection of StarLink Fire communicator installations.

StarLink SLE-LTE-FIRE Series and SLE-LTE-CFB Series NFPA 2010 AHJ Inspection Guide

Date Added: 6/24/20

StarLink SLE-LTE-FIRE Series and SLE-LTE-CFB Series NFPA 2010 AHJ Inspection Guide (includes models SLE-LTEV-FIRE, SLE-LTEV-CFB, SLE-LTEA-FIRE and SLE-LTEA-CFB).

This testing guide is intended to assist with the AHJ inspection of Fire communicator installations.

NAPCO StarLink Commercial Fire Communicator SLE-LTEV-FIRE & SLE-LTEA-FIRE (Sole Path) Dial Capture Wiring Diagram (DWG format)

Date Added: 10/16/20

NAPCO StarLink Commercial Fire Communicator SLE-LTEV-FIRE & SLE-LTEA-FIRE (Sole Path) Dial Capture Wiring Diagram (DWG format)

NAPCO StarLink Commercial Fire Communicator SLE-LTEV-FIRE & SLE-LTEA-FIRE (Sole Path) Dial Capture Wiring Diagram (PDF)

Date Added: 10/16/20

NAPCO StarLink Commercial Fire Communicator SLE-LTEV-FIRE & SLE-LTEA-FIRE (Sole Path) Dial Capture Wiring Diagram (PDF format)

NAPCO StarLink Commercial Fire Communicator SLE-LTEV-FIRE & SLE-LTEA-FIRE (Sole Path) Communicator Input Wiring Diagram (DWG format)

Date Added: 10/16/20

NAPCO StarLink Commercial Fire Communicator SLE-LTEV-FIRE & SLE-LTEA-FIRE (Sole Path) Communicator Input Wiring Diagram (DWG format).

NAPCO StarLink Commercial Fire Communicator SLE-LTEV-FIRE & SLE-LTEA-FIRE (Sole Path) Communicator Input Wiring Diagram (PDF format)

Date Added: 10/16/20

NAPCO StarLink Commercial Fire Communicator SLE-LTEV-FIRE & SLE-LTEA-FIRE (Sole Path) Communicator Input Wiring Diagram (PDF format).

Powering StarLink Fire Communicator LTE and LTEI Models

Date Added: 12/2/22

This Tech Tip describes how to Power the StarLink Fire Communicator models SLE-LTEV-FIRE, SLE-LTEA-FIRE, SLE-LTEVI-FIRE and SLE-LTEAI-FIRE.

Installation Instructions for StarLink SLE-LTE Residential / Commercial Series Alarm Communicators

Date Added: 11/13/19

StarLink SLE-LTE Residential / Commercial Series Alarm Communicators.  Installation Instructions for models:

SLE-LTEV & SLE-LTEA
SLE-LTEV-8D & SLE-LTEA-8D
SLE-LTEV-FIRE & SLE-LTEA-FIRE

See this helpful Tech Tip:  How to configure the StarLink Fire Communicator Inputs for connecting to older legacy FACP systems.  If using an addressable input for radio supervision, this Tech Tip shows how to connect a Form C relay using the PGM1 and [V+] terminals.

CSFM Listing: 7300-0992:0144

Date Added: 7/11/24

Models SLE3/4G-CB, SLE3/4G-CB-TF, SLE3/4G-CFB, SLE3/4G-CFB-PS, SLE-CDMA, SLE-CDMA-FIRE, SLE-GSM-3/4G, SLE-GSM-FIRE, SLECDMA-CB, SLECDMA-CB-TF, SLECDMA-CFB, SLECDMA-CFB-PS, SLE-LTEV-FIRE, SLE-LTEV-8D, SLE-LTEV, SLELTEV-CFB-PS, SLE-LTEV-CB-TF, SLE-LTEV-CFB, SLE-LTEV-CB, SLE-LTEA-CFB, SLELTEA-CFB-PS and SLE-LTEA-FIRE Sole Path Communicators. Model numbers may be followed by an alpha/numeric suffix for marketing purposes.

Models SLE-CDMAI-CFB-PS, SLE3/4GI-CFB-PS, SLECDMAI-CB-TF, SLE3/4GI-CB-TF, SLECDMAI-CFB, SLE3/4GI-CFB, SLECDMAI-CB, SLE3/4GI-CB, SLE-GSMI-3/4G, SLECDMAI, SLE-GSMI-FIRE, SLE-CDMAI-FIRE, SLE-LTEVI-CFBPS, SLE-LTEVI-CFB, SLE-LTEVI-FIRE, SLE-LTEAI-CFBPS, SLE-LTEAI-CFB, SLE-LTEAI-FIRE, *SLE-FNICFB-PS, *SLE-FNI-CFB, and *SLE-FNI-FIRE Dual Path Communicators.

Model numbers may be followed by an alpha/numeric suffix for marketing purposes. *Dual Path Communicators can also be utilized as a Sole Path Communicator. Refer to listee's data sheet for additional detailed product description and operational considerations.