Results Per Page | Showing 1-7 of 7 Results
| 1
Date Added: 2/4/06
AL-PCI2 PC to Digital Lock Interface Installation Instructions
Posted in [Installation Manuals]
Tags:
Date Added: 2/4/06
ALPCI2-U PC to Digital Lock Interface Installation Instructions (banana to DB9 cable).
Click here to download the drivers for the "USB to RS-232" Serial COM Port Cable (cable part number MX1130).
Posted in [Installation Manuals]
Tags:
Date Added: 1/18/18
Andy Phelps, Alarm Lock's National Training manager, shows you how to program a Trilogy lock using the AL-DTM-III (Data Transfer Module). This session is for a newly installed lock, in default mode.
Posted in [Video Tech Tips]
Tags:
Date Added: 4/10/06
AL-DTM-III Changes for the PL3000 & PL3500.
The procedure in this document is required only when a PC or DTM communication Function Card is not presently enrolled in the lock; i.e. the lock is new ("out-ofbox"), or the lock has had all programming erased (restoring factory default).
Posted in [Miscellaneous]
Tags:
Date Added: 2/4/06
AL-DTM-III Setup & Configuration Instructions.
Data Transfer Modules allow the transfer of lock programs and other data between DL-Windows software and Alarm Lock locking devices. The improved DTM-III allows for more locks to be stored per account, both within DL-Windows and within the DTM-III itself. These instructions will allow you to configure for the improved DTM-III operation.
Posted in [Programming Manuals]
Tags:
Date Added: 4/10/06
Upgrading an existing version of DL-Windows when the installed version is higher or lower than V2.94. Also information regarding importing a pre-existing database using the Import utility, and information regarding the AL-DTM-II (DL-Windows versions 3.5+ are not compatible with the AL-DTM-II; the AL-DTM-III must be used).
Posted in [Programming Manuals]
Tags:
Date Added: 2/4/06
SE-DTMIII Conversion Kit, Microprocessor Upgrade Installation & Setup Instructions
Posted in [Tech Tips]
Tags:
