Results Per Page | Showing 1-3 of 3 Results | 1

SLE-LTEA-CFB, SLE-LTEA-CFB-PS, SLE-LTEA-CB, SLE-LTEA-CB-TF, SLE-LTEA, SLE-LTEA-8D and SLE-LTEA-FIRE firmware version LTEA Sole Path code 176.0.4 / 18.1

Date Added: 1/23/20

WARNING: This firmware file (version LTEA Sole Path code 176.0.4 / 18.1) is only for use with these StarLink models:

(See Installation Instructions WI2226 for these models):
SLE-LTEA-CFB
SLE-LTEA-CFB-PS
SLE-LTEA-CB
SLE-LTEA-CB-TF

(See Installation Instructions WI2227 for these models):
SLE-LTEA
SLE-LTEA-8D
SLE-LTEA-FIRE

----------------------------------------------

IMPORTANT: Do not install unless you first verify the existing firmware version of your radio in the StarLink Radio Management Center at www.napconoc.com: The "Checkins" screen, "Firmware Ver" column must read "176.0.x" (where x is any digit).

(Filename: "SLE-LTEA-TIVA-176_0_4_18_1_01_10_2020.bin").

Note: PCD-Windows Quickloader Software version 6.4.0 or later is required.

See WI2003 for complete step-by-step instructions.

Posted in [Software / Firmware]
Tags:

StarLink SLE-LTE Commercial Series Alarm Communicators: Installation Instructions

Date Added: 11/13/19

StarLink SLE-LTE Commercial Series Alarm Communicators.  Installation Instructions (WI2226) for models:

SLE-LTEV-CFB-PS
SLE-LTEA-CFB-PS
SLE-LTEV-CB-TF
SLE-LTEA-CB-TF
SLE-LTEV-CFB
SLE-LTEA-CFB
SLE-LTEV-CB
SLE-LTEA-CB

Posted in [Installation Manuals]
Tags:

StarLink SLE-LTE Documentation Package

Date Added: 2/2/24

This StarLink SLE-LTE Commercial Series Alarm Communicator Documentation Package (WI2718LF) contains the following documents:

(WI1972) SLE-GSM Quick Start
(WI2114) ComNet Remote Service Activation
(WI2226) SLE-LTE Install Instructions

This document applies to the following StarLink communicators:

SLE-LTEV-CFB-PS & SLE-LTEA-CFB-PS: Commercial /Residential Fire and Burglary Radio in red metal housing with SLE-ULPS-R power supply and 16.5V / 20VA transformer mounted inside housing.

SLE-LTEV-CB-TF & SLE-LTEA-CB-TF: Commercial / Residential Burglary and Residential Fire Radio in white metal housing with SLE-ULPS-R power supply and TRF12/T123 plug-in 16.5V / 20VA transformer.

SLE-LTEV-CFB & SLE-LTEA-CFB: Commercial / Residential Fire and Burglary in red metal housing. Powered directly from control panel (no power supply, no transformer, rated 12/24VDC input).

SLE-LTEV-CB & SLE-LTEA-CB: Commercial / Residential Burglary and Residential Fire Radio in white metal housing. Powered directly from control panel (no power supply, no transformer).

Posted in [Installation Manuals]
Tags: